• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

What's holding me back from 100% utilization?

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,095 (1.28/day)
System Name ZeroUptime | M.A.S.S / MM1
Processor Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling NZXT Kraken / Noctua NH-L12 / Apple
Memory 16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s) Powercooler ATI vega 64 / GT 7300 / ARM
Storage Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s) Acer Predator X34 / Headless / Acer X34 Non predator
Case NZXT H630 |Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s) Onboard / Onboard / Onboard
Power Supply Corais HX850 | Corsair TX750 / Internal 250w
Mouse g502 proteus core / Headless / g502 proteus core
Keyboard Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software Windows 10 / ESXI / Big Sur 11.2.2



netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global congestionprovider=ctcp
netsh int tcp set global ecncapability=enable
netsh int tcp set global chimney=enabled
netsh int tcp set global dca=enabled
netsh interface ipv4 show subinterface

C:\Windows\system32> netsh int tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State : enabled
Chimney Offload State : enabled
NetDMA State : enabled
Direct Cache Acess (DCA) : disabled
Receive Window Auto-Tuning Level : disabled
Add-On Congestion Control Provider : ctcp
ECN Capability : enabled
RFC 1323 Timestamps : disabled

I believe it's a physical limitation of my drive speeds, just curious if anybody else has some thoughts.

My throughput test shows I can do about 670mbps which is equal to about 67% but im getting around 75% utilization so I don't really trust it.

Currently a Airport Extreme > 30m cat5e > Netgear gig switch > PC
 
Last edited:

Athlon2K15

HyperVtX™
Joined
Sep 27, 2006
Messages
7,909 (1.24/day)
Location
O-H-I-O
Processor Intel Core i9 11900K
Motherboard MSI Z590 Carbon EK X
Cooling Custom Water
Memory Team DDR4 4000MHz
Video Card(s) ASUS TUF RTX 3080 OC
Storage WD WN850 1TB
Display(s) 43" LG NanoCell 4K 120Hz
Power Supply Asus Thor 1200w
Mouse Asus Strix Evolve
Keyboard Asus Strix Claymore
Looks like drive speeds to me, unless this is an SSD
 
Joined
May 21, 2008
Messages
4,113 (0.71/day)
Location
Iowa, USA
System Name THE CUBE 2.0
Processor Intel i5 13600k
Motherboard MSI MPG Z690 EDGE DDR4
Cooling Phanteks PH-TC14PE BK 2x T30-120 Fan mod mount
Memory G.Skill TridentZ 3200 MT/s C15 32GB 2x16GB
Video Card(s) Gigabyte Aorus 1080 Ti 11GB OC: Core 2GHz, Mem 5.7GHz
Storage WD SN770 250GB / 3x WD SN850X 2TB / Toshiba X300 4TB / 2x RAID1 Toshiba P300 3TB
Display(s) Samsung 49" Odyssey OLED G95SC 240Hz 5120 x 1440
Case "THE CUBE" Custom built, pure Red Alder wood
Audio Device(s) Beyerdynamic DT 880
Power Supply Corsair RM1000X
Mouse Logitech G700
Keyboard Logitech G910
Software Windows 11 Pro
You can only go as fast as the slowest device. What devices is it going from? HDD->Router->SSD?
 

FordGT90Concept

"I go fast!1!11!1!"
Joined
Oct 13, 2008
Messages
26,255 (4.66/day)
Location
IA, USA
System Name BY-2021
Processor AMD Ryzen 7 5800X (65w eco profile)
Motherboard MSI B550 Gaming Plus
Cooling Scythe Mugen (rev 5)
Memory 2 x Kingston HyperX DDR4-3200 32 GiB
Video Card(s) AMD Radeon RX 6800 XT
Storage Samsung 980 Pro, Seagate Exos X12 TB 7200 RPM
Display(s) Nixeus NX-EDG274K (3840x2160@144 DP) + Samsung SyncMaster 906BW (1440x900@60 HDMI-DVI)
Case Coolermaster HAF 932 w/ USB 3.0 5.25" bay
Audio Device(s) Realtek ALC1150, Micca OriGen+
Power Supply Enermax Platimax 850w
Mouse SteelSeries Sensei RAW
Keyboard Tesoro Excalibur
Software Windows 10 Home 64-bit
Benchmark Scores Faster than the tortoise; slower than the hare.
95.3 MB/s is very good for gigabit LAN.
 

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,095 (1.28/day)
System Name ZeroUptime | M.A.S.S / MM1
Processor Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling NZXT Kraken / Noctua NH-L12 / Apple
Memory 16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s) Powercooler ATI vega 64 / GT 7300 / ARM
Storage Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s) Acer Predator X34 / Headless / Acer X34 Non predator
Case NZXT H630 |Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s) Onboard / Onboard / Onboard
Power Supply Corais HX850 | Corsair TX750 / Internal 250w
Mouse g502 proteus core / Headless / g502 proteus core
Keyboard Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software Windows 10 / ESXI / Big Sur 11.2.2
I actually made a crossover cable and just hooked straight up, performed the same tests with the exact same results. So assuming it's not the nic cards and they perform as they should with a throughput of 112.5Mbps then it's my drives maxing out at 95Mbps read/write.

Time to upgrade some hardware!
 
Joined
Mar 6, 2008
Messages
2,753 (0.47/day)
Location
Minnesota
You can set up a ramdisk and do some RAM to RAM transfers.
 

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,202 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
10% of the physical bandwidth goes into various overheads, rest is up to the quality of the PHY. So yeah, 95 MB/s is pretty good for 1 GbE.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I wouldn't say 95MB/s is pretty good for Gigabit. It isn't terrible, but it isn't pretty good either, I'd say OK at best. A proper setup should give 110-120MB/s with Gigabit with a constant 90-97% utilization.

This is what you should be getting.

Start of Transfer:


End of Transfer:


The two dips are where the transfer switched between files.
 
Last edited:

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,095 (1.28/day)
System Name ZeroUptime | M.A.S.S / MM1
Processor Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling NZXT Kraken / Noctua NH-L12 / Apple
Memory 16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s) Powercooler ATI vega 64 / GT 7300 / ARM
Storage Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s) Acer Predator X34 / Headless / Acer X34 Non predator
Case NZXT H630 |Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s) Onboard / Onboard / Onboard
Power Supply Corais HX850 | Corsair TX750 / Internal 250w
Mouse g502 proteus core / Headless / g502 proteus core
Keyboard Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software Windows 10 / ESXI / Big Sur 11.2.2
What are you transferring to and from though? Also, have you done tweaks?
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.72/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
bad switch is bad id point the finger at that netgear switch
 

Athlon2K15

HyperVtX™
Joined
Sep 27, 2006
Messages
7,909 (1.24/day)
Location
O-H-I-O
Processor Intel Core i9 11900K
Motherboard MSI Z590 Carbon EK X
Cooling Custom Water
Memory Team DDR4 4000MHz
Video Card(s) ASUS TUF RTX 3080 OC
Storage WD WN850 1TB
Display(s) 43" LG NanoCell 4K 120Hz
Power Supply Asus Thor 1200w
Mouse Asus Strix Evolve
Keyboard Asus Strix Claymore
bad switch is bad id point the finger at that netgear switch

I'll just assume you can't read because we already narrowed it down to the hard drives when he hooked it up direct with a crossover cable:slap:
 

Aquinus

Resident Wat-man
Joined
Jan 28, 2012
Messages
13,147 (2.97/day)
Location
Concord, NH, USA
System Name Apollo
Processor Intel Core i9 9880H
Motherboard Some proprietary Apple thing.
Memory 64GB DDR4-2667
Video Card(s) AMD Radeon Pro 5600M, 8GB HBM2
Storage 1TB Apple NVMe, 4TB External
Display(s) Laptop @ 3072x1920 + 2x LG 5k Ultrafine TB3 displays
Case MacBook Pro (16", 2019)
Audio Device(s) AirPods Pro, Sennheiser HD 380s w/ FIIO Alpen 2, or Logitech 2.1 Speakers
Power Supply 96w Power Adapter
Mouse Logitech MX Master 3
Keyboard Logitech G915, GL Clicky
Software MacOS 12.1
I'll just assume you can't read because we already narrowed it down to the hard drives when he hooked it up direct with a crossover cable:slap:

+1: This. It sounds like your topping out your hard drive access speed. Your 1Gbit ethernet might be running at full speed but you won't notice it unless your hard drive is reading at least that fast or faster. I suspect your drive isn't reading much faster than 100MB/s tops.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
What are you transferring to and from though? Also, have you done tweaks?

Reading from the Rig2 RAID0 --> Cheap Rosewill 8-Port Switch --> Cheap Netgear 8-Port Switch --> Main Rig RAID5

I would guess your write speeds on your destination drive is probably the limiting factor for you, assuming you are using a single HDD on both ends. However, I'd run hard drive benchmarks(CrystalDiskMark) on both ends to see where the bottleneck is.

+1: This. It sounds like your topping out your hard drive access speed. Your 1Gbit ethernet might be running at full speed but you won't notice it unless your hard drive is reading at least that fast or faster. I suspect your drive isn't reading much faster than 100MB/s tops.

Generally HDDs read faster than write, so my guess is writing to the destination drive is actually the limiting factor, but he'll have to test to find the real bottleneck.
 
Top