- Joined
- Apr 4, 2008
- Messages
- 4,686 (0.80/day)
| System Name | Obelisc |
|---|---|
| Processor | i7 3770k @ 4.8 GHz |
| Motherboard | Asus P8Z77-V |
| Cooling | H110 |
| Memory | 16GB(4x4) @ 2400 MHz 9-11-11-31 |
| Video Card(s) | GTX 780 Ti |
| Storage | 850 EVO 1TB, 2x 5TB Toshiba |
| Case | T81 |
| Audio Device(s) | X-Fi Titanium HD |
| Power Supply | EVGA 850 T2 80+ TITANIUM |
| Software | Win10 64bit |
Short of the $200 aquacomputer airplex option I can't find a 140mm rad with a res built in. So I wonder if something like this would work:
With this and a cap attached to the raised fill port on the bottom which I would make the top.
The idea being it would act like a tiny t-line. I'd fill it to the height of the rad and leave the extender filled with air. I'd let it run outside the system for awhile and add a few more drops as the air worked it's way up and out and the water level dropped. Would this work? Do I have to worry about pressure or would the hose give/tiny bit of air in the extender take care of that? This would be with the Drive II obviously.
With this and a cap attached to the raised fill port on the bottom which I would make the top.
The idea being it would act like a tiny t-line. I'd fill it to the height of the rad and leave the extender filled with air. I'd let it run outside the system for awhile and add a few more drops as the air worked it's way up and out and the water level dropped. Would this work? Do I have to worry about pressure or would the hose give/tiny bit of air in the extender take care of that? This would be with the Drive II obviously.