Hello. I'm trying to install Windows98 SE to an computer with agp port and ide disk, in other word to an old computer. I'm doing this because i want an retro machine.
Motherboard: MSI K7N420 Pro, Amd socket, Ati agp card, Award Bios
I have not been able to install Win98 SE because i have this error message just when dvd drive starts to read:
Verifying DMI Pool Data.......
Boot from ATAPI CD-ROM :
Invalid system disk.
Replace the disk, and then press any key
Nvidia Boot Agent, PXE-2.0 (build 082 V1.04)
Copyright (C) 2001 NVIDIA Corporation
Copyright (C) 1997-2000 Intel Corporation
PXE-E61: Media test failure, check cable
PXE-M0f: Exiting NVIDIA Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I have checked the bios which name is Award and bios recognizes:
IDE Primary master: Maxtor 40gb
IDE Secondary master HL-DT-ST DVDRAM
I have also made boot device sequence as follows: First device is CDROM and second HDD-0 and third is disabled
I have tried to install with different hdd's and dvd drives.
Also, what i wonder is that this setup installs WinXP SP3 with same settings without any hickups. I'm not an expert with computers but this makes me wonder.
Computer also boot's Hirens boot cd 12.00. From there i have tried different programs to format, set active, installed/uninstalled Boot Manager, and repaired MBR.
I also downloaded and burned to a dvd MS-DOS 6.22 but setup wont boot with it.
Any help would be appreciated.
Motherboard: MSI K7N420 Pro, Amd socket, Ati agp card, Award Bios
I have not been able to install Win98 SE because i have this error message just when dvd drive starts to read:
Verifying DMI Pool Data.......
Boot from ATAPI CD-ROM :
Invalid system disk.
Replace the disk, and then press any key
Nvidia Boot Agent, PXE-2.0 (build 082 V1.04)
Copyright (C) 2001 NVIDIA Corporation
Copyright (C) 1997-2000 Intel Corporation
PXE-E61: Media test failure, check cable
PXE-M0f: Exiting NVIDIA Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I have checked the bios which name is Award and bios recognizes:
IDE Primary master: Maxtor 40gb
IDE Secondary master HL-DT-ST DVDRAM
I have also made boot device sequence as follows: First device is CDROM and second HDD-0 and third is disabled
I have tried to install with different hdd's and dvd drives.
Also, what i wonder is that this setup installs WinXP SP3 with same settings without any hickups. I'm not an expert with computers but this makes me wonder.
Computer also boot's Hirens boot cd 12.00. From there i have tried different programs to format, set active, installed/uninstalled Boot Manager, and repaired MBR.
I also downloaded and burned to a dvd MS-DOS 6.22 but setup wont boot with it.
Any help would be appreciated.