• We've upgraded our forums. Please post any issues/requests in this thread.

WTF Logitech! Were's the G9x drivers

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,086 (2.01/day)
Likes
889
System Name Absolute Zero | M.A.S.S
Processor Intel i7 4770k | i7 920
Motherboard Gigabyte Z87X-UD4H | EVGA X58 FTW3 SLI
Cooling Phanteks ph-tc14pe | CM 212+ Push Pull
Memory Mushkin 16Gb at 2400Mhz | Corsair Vengence 6x8Gb=48Gb
Video Card(s) EVGA SC GTX 770 2Gb | Nvidia 7300GT
Storage Sandisk 256Gb Ultra Plus x 2 raid0 + 72.12 500Gb | Intel 320 80Gb 2x1.5Tb, 2x2Tb 2x.5Tb + 3 x6Tb
Display(s) Samsung 245BW + Asus PB278Q + Samsung 40" 650A | None
Case NZXT H630 |Rosewill 8bay 4u server chasiss
Audio Device(s) Asus Xonar HDAV + GTX770 | Onboard
Power Supply Silverstone DA800 | Rocketfish 700w aka fsp
Software Windows 7 ultimate X64 | Debian 7 wheezy
#1
So where do I find the Setpoint software to change the DPI levels on the G9X?!? I Downloaded the setpoint software, and then it simply showed me a device manager for the mouse with options to update the software.

I found an older version but still no setpoint software management. So any ideas?
 

sneekypeet

Unpaid Babysitter
Staff member
Joined
Apr 12, 2006
Messages
24,624 (5.77/day)
Likes
9,349
System Name His
Processor Intel i7 5930K
Motherboard Asus Maximus V Extreme
Cooling Thermalright True Spirit 140 BW Rev.A
Memory Corsair Dominator Platinum ROG
Video Card(s) nVidia GTX 1080 SLI with EVGA Hybrid coolers.
Storage Samsung 960 Pro / Crucial MX300 750GB / Seagate 1TB Spinner
Display(s) Sony 43" 4K 60hz
Case SilverStone Temjin TJ11
Audio Device(s) Realtek on board > Sony receiver > Cerwin Vega's
Power Supply Thermaltake TPSG 1050W
Mouse Always Changing
Keyboard Always Changing
Software Windows 10 Pro 64
#2

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,086 (2.01/day)
Likes
889
System Name Absolute Zero | M.A.S.S
Processor Intel i7 4770k | i7 920
Motherboard Gigabyte Z87X-UD4H | EVGA X58 FTW3 SLI
Cooling Phanteks ph-tc14pe | CM 212+ Push Pull
Memory Mushkin 16Gb at 2400Mhz | Corsair Vengence 6x8Gb=48Gb
Video Card(s) EVGA SC GTX 770 2Gb | Nvidia 7300GT
Storage Sandisk 256Gb Ultra Plus x 2 raid0 + 72.12 500Gb | Intel 320 80Gb 2x1.5Tb, 2x2Tb 2x.5Tb + 3 x6Tb
Display(s) Samsung 245BW + Asus PB278Q + Samsung 40" 650A | None
Case NZXT H630 |Rosewill 8bay 4u server chasiss
Audio Device(s) Asus Xonar HDAV + GTX770 | Onboard
Power Supply Silverstone DA800 | Rocketfish 700w aka fsp
Software Windows 7 ultimate X64 | Debian 7 wheezy
#3
Trying now! Will edit later.

Badass dude! Thank you! I searched for a good hour at least trying to find solutions to this.
 
Last edited:

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
24,277 (5.51/day)
Likes
10,367
Location
Indiana, USA
Processor Intel Core i7 4790K@4.6GHz
Motherboard AsRock Z97 Extreme6
Cooling Corsair H100i
Memory 32GB Corsair DDR3-1866 9-10-9-27
Video Card(s) ASUS GTX960 STRIX @ 1500/1900
Storage 480GB Crucial MX200 + 2TB Seagate Solid State Hybrid Drive with 128GB OCZ Synapse SSD Cache
Display(s) QNIX QX2710 1440p@120Hz
Case Corsair 650D Black
Audio Device(s) Onboard is good enough for me
Power Supply Corsair HX850
Software Windows 10 Pro x64
#4
http://www.logitech.com/pub/techsupport/mouse/setpoint632_x64.exe

If you are running 64-bit Windows make sure you download the 64-bit version of the software from the link above. For some reason logitech's site is stupid and links to the 32-bit version, which means the drivers aren't actually installed, which means the mouse still runs on the basic Windows HID drivers, which means the software doesn't detect it, which means you won't get any options in the software to customize the mouse.

Once installed go into setpoint and your mouse should be listed in the devices and the option to change the DPI settings should be in the Pointer section once you select the G9x from the list of detected devices(which obviously only the G9x will probably be listed).
 

freaksavior

To infinity ... and beyond!
Joined
Dec 11, 2006
Messages
8,086 (2.01/day)
Likes
889
System Name Absolute Zero | M.A.S.S
Processor Intel i7 4770k | i7 920
Motherboard Gigabyte Z87X-UD4H | EVGA X58 FTW3 SLI
Cooling Phanteks ph-tc14pe | CM 212+ Push Pull
Memory Mushkin 16Gb at 2400Mhz | Corsair Vengence 6x8Gb=48Gb
Video Card(s) EVGA SC GTX 770 2Gb | Nvidia 7300GT
Storage Sandisk 256Gb Ultra Plus x 2 raid0 + 72.12 500Gb | Intel 320 80Gb 2x1.5Tb, 2x2Tb 2x.5Tb + 3 x6Tb
Display(s) Samsung 245BW + Asus PB278Q + Samsung 40" 650A | None
Case NZXT H630 |Rosewill 8bay 4u server chasiss
Audio Device(s) Asus Xonar HDAV + GTX770 | Onboard
Power Supply Silverstone DA800 | Rocketfish 700w aka fsp
Software Windows 7 ultimate X64 | Debian 7 wheezy
#5
Got it!!! Works great now! Glad I have cool green lights instead of lame blue ones now though.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
24,277 (5.51/day)
Likes
10,367
Location
Indiana, USA
Processor Intel Core i7 4790K@4.6GHz
Motherboard AsRock Z97 Extreme6
Cooling Corsair H100i
Memory 32GB Corsair DDR3-1866 9-10-9-27
Video Card(s) ASUS GTX960 STRIX @ 1500/1900
Storage 480GB Crucial MX200 + 2TB Seagate Solid State Hybrid Drive with 128GB OCZ Synapse SSD Cache
Display(s) QNIX QX2710 1440p@120Hz
Case Corsair 650D Black
Audio Device(s) Onboard is good enough for me
Power Supply Corsair HX850
Software Windows 10 Pro x64
#6
Also, just an FYI, logitech claims that their Logitech Gaming Software will support the G9x/G700 with the next release(version 8.40). Supposedly this is coming before the end of the year. So keep an eye out.