- Joined
- Sep 19, 2005
- Messages
- 156 (0.02/day)
System Name | Homebrew |
---|---|
Processor | Intel I5 4690k>Ryzen3900x |
Motherboard | Gigabyte Z97X-Gaming 5>Aorus Elite X570 |
Cooling | CPU: (Prolimatek Megahelim 2+1 exhaust fan)>X72 Kraken, GPU: 570lx 240mm AIO w/kraken G10 + Ramsinks |
Memory | Kingston Hyper-X 2400 Savage 2 x 8Gb>16GB Corsair Vengence Pro M2Z(for Ryzen)>32GB PatriotViper 4400 |
Video Card(s) | Sapphire RX Vega 56 HBM to 930Mhz from 800Mhz for Gaming & 850 for Gigapixel AI |
Storage | 850 evo 250Gb, 860 1TB, HGST HDN726040ALE640, WD10EACS 1Tb, WD20EARS 2Tb, WD80EMAZ, WD140EMFZ |
Display(s) | Benq GW2265>C24FG73 Samsung 144Hz |
Case | Antec P180>Lian-Li 011 Dynamic XL |
Audio Device(s) | Asus Xonar DX |
Power Supply | Corsair HX850 |
Mouse | Gigabyte M6900> Razer Deathadder V2 (optical switches) |
Keyboard | Logitech G15 + Wolfking circular gaming KB |
Software | Windows 7 SP1>Windows 10 Pro N fully activated with gatherosstate.exe |
Benchmark Scores | http://www.doomiii.pwp.blueyonder.co.uk/system-spec.html < Need a new host |
So they tell me to change drivers when I told them its a problem on power on; and they rule out the logical fallback of using a digital to analogue converter (which just about every graphics card includes in the box).email correspondance said:Dear Mr. ,
We are sorry for the delay in replying to your email. From the information you
supplied I understand that after getting a new motherboard your monitor has trouble
to stay tuned to a digital signal and not revert to analogue when there is no video
output.
Please update mainboard and graphics drivers to the latest version. Enable "reduce
DVI blanking" in graphcis card properties.
You should connect only DVI or only VGA, not DVI and VGA as that's not supported.
We hope we answered your question satisfactorily. Should you have further questions
on this subject please refer to: VSC070816-0002
With kind regards,
Kimberley Barker
ViewSonic Warranty Line
_____________________________________
If you have a new question, or need to react later, please use the e-mail service at
www.viewsoniceurope.com.
Please include the content of the original email.
Internet communications are not secure and because of that Viewsonic can not accept
legal responsibility for the content of this message.
Your Message
I have an ati x1900xt graphics card with digital output, connected to my vx922. I
noticed after getting a new motherboard (Gigabyte P35-DQ6), that my monitor has
trouble to stay tuned to a digital signal and not revert to analogue when there is
no video output. I have to wait 15 min with everything turned off to get a
digital signal passed to my screen. I have disabled windows powersaving to put my
monitor in standby because the monitor shows a blank screen and the power light
flashes on and off every second or so. Since the monitor has trouble setting itself
in digital mode from power up, meaning I cant access the bios while its in analogue
mode, its a hardware rather than a software problem. Is there a fix to this
problem? It seems there is some incompatabilty with the plug in and play aspect
between my graphics card and monitor. I have not tried using an analogue cable
since I threw mine out with my old CRT.
I posted this in graphics card cause I read that its the graphics cards bios job to tell the monitor to use digital or analogue so see a possible solution from changing the bios.
I believe I updated the bios a while back. From one x1900xt bios to another x1900xt bios (just later release), the information I have to hand is 113-A52025-106. There used to be a lookup table on ATIs site but I cant find it.