• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

X800 Pro PCI-E Volt Mod

TheWretched

New Member
Joined
Apr 27, 2005
Messages
20 (0.00/day)
I found this site for volt modding a PCI-E X800 XT PE which should be the same as a x800 Pro right?
http://www.vr-zone.com.sg/?i=1579&s=1



So here's some pics I made of my own card (sorry I did it in Paint):
http://www.geocities.com/n2the_void/ (data transfer limit is low sorry :( )

Can anyone tell me if this will work? I've seen some volt mods done similarly but they didn't ground the other side of the Mem reisitors.
 

Urlyin

I still do pencil mods
Joined
Aug 17, 2004
Messages
2,272 (0.32/day)
TheWretched said:
I found this site for volt modding a PCI-E X800 XT PE which should be the same as a x800 Pro right?
http://www.vr-zone.com.sg/?i=1579&s=1



So here's some pics I made of my own card (sorry I did it in Paint):
http://www.geocities.com/n2the_void/ (data transfer limit is low sorry :( )

Can anyone tell me if this will work? I've seen some volt mods done similarly but they didn't ground the other side of the Mem reisitors.

From what we've seen the PCI-E Pro has the memory like its AGP counter part here and the Vcore of the X800 XL here
 

TheWretched

New Member
Joined
Apr 27, 2005
Messages
20 (0.00/day)
From what I can tell the resistor mods for the memory look the same on both except for the measurement points, right?

Are the measurement points correct in the link I gave above?
 
Top