XFI Mod is back:

[KainXS]

I'm gonna try that on my laptop

 

[Fatal]

I tried it on my Sabertooth X58 and blue screened like mad so removed it.

 

[expn]

waste of time resulting in worse audio, and here is why:


X-FI modded Realtek 2.71 vs regular Realtek 2.71 x64 driver.
(ALC888 @ Gigabyte EP-43 mobo, Windows 8 x64 pro)

 

[strelok-ac]

dolby dts

This mod bad sound quality(and no 96kHz) because of DTS! Also bad Dobly preset configuration. I remove all about dts from .inf, and registry keys with presets from Software/Dolby. So sound become better! Also install DolbyHomeTheaterv4 for better sound normalization config! This mod driver no guarantee for Creative X-Fi will work...

Who want simple sound enhancements with primordial good sound quality and volume normalization can install DolbyHomeTheater v4 with dolby sound driver inside! Tested on win7.

Download

For some cards you can use dolby enhancements with your sound driver.Just start from step 3!
1. Revert sound driver to Windows built-in driver.
2. Reboot.
3. Open DTPC.msi from OS architecture folder
4. If you revert sound driver to Win built-in choose install driver option with DHT! Others needn't choose driver.
5. After installition Dolby panel will autostart at tray, and if it gives an error remove dolby and start from step 1!

PS. Corrected by me .inf file from 2.67 modded realtekHDA. This file have corretly worked SonicFocus OR 96kHz . Needed files for installition find by yourself

 

[johnslash]

A hint to get a better sound is enabling 7.1 or 5.1 in Realtek Control Panel and Headphone on Creative Control Launcher, and for those who uses the DHT V4 I'll upload a preset for you guys test and see if is good for you.

http://www.mediafire.com/?2w2b8vi2z9jj535

 

[Delphium]

Alc898 ddl

Hi, recently I upgraded my motherboard to a GA-X79S-UP5-WiFi (Wish I got the GA-X79-UD5 now) which comes with an onboard Realtek ALC898 chipset audio controller.

The ALC898 on the X79-UD5 works with support for DDL, sadly the UP5 does not, despite using the same chipset.

I understand this to be a licensing limitation built into the motherboard?

I have installed these modded drivers and the Creative X-Fi MB2 software with success, although I am currently seeing little benefit other than the options available in the Creative software.

My aim is to get Dolby Digital Live working for 5.1 in games over optical, sadly this appears not to be an option in any of the creative/realtek softwares using the modded drivers.

Am I missing something, or perhaps have I misunderstood the capability of these modded drivers?

Any help would be hugely appreciated.

Many thanks
Delphium

 

[Mussels]

Hi, recently I upgraded my motherboard to a GA-X79S-UP5-WiFi (Wish I got the GA-X79-UD5 now) which comes with an onboard Realtek ALC898 chipset audio controller.

The ALC898 on the X79-UD5 works with support for DDL, sadly the UP5 does not, despite using the same chipset.

I understand this to be a licensing limitation built into the motherboard?

I have installed these modded drivers and the Creative X-Fi MB2 software with success, although I am currently seeing little benefit other than the options available in the Creative software.

My aim is to get Dolby Digital Live working for 5.1 in games over optical, sadly this appears not to be an option in any of the creative/realtek softwares using the modded drivers.

Am I missing something, or perhaps have I misunderstood the capability of these modded drivers?

Any help would be hugely appreciated.

Many thanks
Delphium

these modded drivers do not delivery many of their claimed features.

 

[Wrigleyvillain]

I am using these and they seem to be better than reg Realtek (if only for CMSS-3D and the "Headphones" setting in my case).

FWIW, I too thought I wanted to go 5.1 over optical when I got my mini-itx board becuase I had to ditch my soundcard and I swear I read about some advantage(s) to using optical out instead from the onboard 898 but now for the life of me can't remember what that was anyway. Perhaps you could remind me. Why do you seek to go that route?

At any rate, going full ATX again soon and looking forward to having a real soundcard again.

 

[Mussels]

I am using these and they seem to be better than reg Realtek (if only for CMSS-3D and the "Headphones" setting in my case).

FWIW, I too thought I wanted to go 5.1 over optical when I got my mini-itx board becuase I had to ditch my soundcard and I swear I read about some advantage(s) to using optical out instead from the onboard 898 but now for the life of me can't remember what that was anyway. Perhaps you could remind me. Why do you seek to go that route?

At any rate, going full ATX again soon and looking forward to having a real soundcard again.

optical CAN sound better than cheap analogue, at least for stereo.

 

[Delphium]

FWIW, I too thought I wanted to go 5.1 over optical when I got my mini-itx board becuase I had to ditch my soundcard and I swear I read about some advantage(s) to using optical out instead from the onboard 898 but now for the life of me can't remember what that was anyway. Perhaps you could remind me. Why do you seek to go that route?

I choose optical for a number of reasons...

A) My decoder's (Logitech Z-5500) analogue channels are already populated by another device leaving only optical and coax as inputs.

B) Originally the electrics in my old house are not that good, I was noticing earthing between the PC and the decoder sometimes causing the decoder to crash and restart when using copper which acted as a ground, using optical overcome this, although this is not so much an issue as it once was.

C) It was easier to manage and all digital sources such as dvd/blu-ray would simply pass the audio stream to the decoder, which admittedly they still do, its just a pain to keep swapping between analogue and digital outputs/inputs.

Pitty these drivers dont really work as I thought they might, or maybe Gigabyte have really done a number on the board restricting the modded drivers functionality just like the castrated Realtek drivers supplied.

EDIT: managed to get DTS/DDL working with an unlocked driver from this thread... http://www.techpowerup.com/forums/t...nd-dts-interactive.193148/page-6#post-3036689
Audio quality is good and DTS/DDL functionality working.

 

[xZero543]

It doesn't work for me.

Audio: ALC887 (Integrated)
MBO: ASUS M5A97 R2.0
OS: Windows 7 Ultimate 64-bit

I installed it, sound works, and detected as Realtek ALC-8xx/26x HD X-Fi@Gamespirit, but:
- In Audio properties, there are only classic tabs: General, Levels and Advanced
- Creative Audio Control Panel keep saying error "The audio device supported by this application is not detected. The application will exit."
- Creative Alchemy says same.
- Nothing works except Realtek audio panel and sound.



I don't know why it is not working. I restarted my computer several times.
Is there are any solution or any other modded driver?

 

[Mussels]

havent had a BSOD since uninstalling these drivers... they may be buggy on 8.1

just throwing that out as an FYI, they were driver power state related BSODs.

 

[tomatoseraiwangi]

Hi, i've been using these drivers for quite some time. Right now i'm using win 8.1 and an analog headphone. I cannot recall if it happened when i was using win 7, but some applications throw errors when using this driver and randomly sound would stop entirely for all applications even system sounds which then requires a system restart (service restart doesn't work for me). when I first started using this modded driver, only realtek effects, Sonic Focus, DTS, Dolby Home Theater 4, and some Creative's effects that were enabled, excluding THX stuff. Then I started looking into the modded inf files (this started a long time ago, I switched between using this driver and official driver now and then because cannot figure out the solution). Just yesterday i managed to solve that sound problem (i only fiddled with the inf and replaced some files, newer PCEE4 files i believe). Now i have dolby home theater spruce property page (advertised with my motherboard, and it appears after i removed some lines that correspond to SRS effect, which wasn't not there for me but it appeared at my internship's computer after i installed it with the mod driver, secretly), realtek effects, DTS (this and PCEE4 previusly set by Gamespirit, having reversed LFX and GFX, which triggered the sound problem for me), Sonic Focus, and Dolby Home Theater 4 (PCEE4). As a bonus for me there is a profile editor for PCEE4 which allows users to set their preferred settings. I disabled Creative effects and drivers as i felt unsatisfied of not being able to fully use their effects (THX). As for the reversed LFX and GFX, setting them accordingly won't solve it, it even prevents any sounds coming out, so i experimented with putting them in 2 consecutive APOs, with the LFX set as GFX in one of the APOs.

some screenshots:

If anyone wants to try this here it is, though i'm not sure if it work over optical or anything like that, PCEE 4 profile editor is included and has to be installed manually, credit to Gamespirit for the modded driver:

Spoiler

R 2.73 RTM.zip
http://www29.zippyshare.com/v/30780508/file.html

Edit: here is supposed-to-be handle-leak-free Sonic Focus file(s) (http://withinwindows.com/blog/2008/...-the-how-and-when-were-getting-the-fixed-ones. Just replace the files in "Vista64" folder):

Spoiler

handle-leak fix.zip
http://www42.zippyshare.com/v/40284229/file.html

 

[OneMoar]

link above works but I had to toggle the speaker configuration to get it reset the output pins to get the audio to work correctly
AFAIK it initally sounded like i was only getting 1.5 channels once I toggled the output jacks and set the speakers to quadraphonic and then back to stereo it behaved PCE4 utility didn't install tho
I perfer AIMP3 over xmplay
and to whoever posted the results saying the drivers are worse its most likely because you used a line out loop the pin configuration on realtek chips is a bit flaky if you use the wrong combination of output and input pins it results in cross-talk/leakage the stock drivers try and prevent this by pin switching internally if You wanna test this do this

enable both front and rear "green" outputs connect your line in BLUE to the orange or Gray and set that pin as a output

you should be getting a lot of crosstalk or missing channel
this issue also presents its self with the pink/black combo

 

[tomatoseraiwangi]

link above works but I had to toggle the speaker configuration to get it reset the output pins to get the audio to work correctly
AFAIK it initally sounded like i was only getting 1.5 channels once I toggled the output jacks and set the speakers to quadraphonic and then back to stereo it behaved PCE4 utility didn't install tho
I perfer AIMP3 over xmplay
and to whoever posted the results saying the drivers are worse its because you used a line out loop these drivers change the pin assignments and on certain realtek chips the lineout/green output share a ground resulting in terrible audio if you use both

do you have to toggle it each time the system starts or just that once?

 

[OneMoar]

do you have to toggle it each time the system starts or just that once?

seems ok now that I reset the pins

 

[AphexDreamer]

Any benefits in using this with some Sennheiser Stereo Headphones?

 

[OneMoar]

Any benefits in using this with some Sennheiser Stereo Headphones?

if you like that processed audio sound sure its not overly processed the sonic focus one is about the only effect thats worth a dam

 

[strelok-ac]

After I has Win8.1 updated, find that SRS modules start to work, but i cannot turn off it in sound panel. So I make corrections in R2.74b modded driver. Remove DTS and SRS stuff, so we has SonicFocus, Creative and Dolby working stuff only!

 

[leoriv]

This driver did not supported
I am using intel DH61WW motherboard

Please help me

 

[OneMoar]

driver is for realtek 8xxx or newer your board is to old

 

[leoriv]

Ok thanks for reply
if it possible to get Dolby Digital driver on my motherboard

 

[Drift_91]

Hey guys, first time posting. I've tried out these drivers with the X-Fi MB3 software and they worked perfectly except one major problem. For some reason having the modded driver installed breaks my microphone input. It registers that there's a mic plugged into the jack but it gets no sound. I do have a ALC656 chipset which may not be supported, but I'd expect it to simply not work at all. Anyone know a workaround or a fix?

 

[OneMoar]

try checking the disable all sound effects for the micophone

 

[OneMoar]

I stopped using this and switched to a combination of the official drivers
viper4windows http://vipersaudio.com/blog/?page_id=59
and equaliserAPO with a custom 63 band config http://sourceforge.net/projects/equalizerapo/
so far the results are superior the only limitation is that with both APO's enabled you are limited to 48Khz/24Bit
heres my EQ config for EqualiserAPO http://cl.ly/XXuI/config.txt
place in C:\Program Files\EqualizerAPO\config