Y-CRUNCHER - PI-2.5B Bench

[Petar666]

Y-CRUNCHER - PI-2.5B, the bench is located in BenchMate, which you can download here - BenchMate 0.10.9.2 The CPU-Z - CPU and Memory partition should also be present in the picture, and the CPU partition should be the actual CPU frequency, not the one reduced by the power saving features, if any. I recommend those with less cooling to download 100-200mhz before releasing it!
When the test is over, press F6 for the result.
Example, my result
24/7 Intel® Core™ i9-10900KF @5.0GHz; RAM 2X8GB DDR4 @4266MHz 18-19-19-36 CR2) - 105.90 s

 

[The King]

 

[Jim Johnson]

I saved it for overclock.net but before adding the CPU-Z etc. Anyways, I added them here as an afterthought.

 

[Jim Johnson]

Better result. Can't figure out how to edit the above post.

 

[The King]

CPU is stock no CO.

 

[The King]

Reduced my previous time by almost 24 seconds. (122.389 sec)

 

[ir_cow]

HWBOT Submission: https://hwbot.org/submission/4982911_ir_cow_y_cruncher___pi_2.5b_core_i9_12900k_1min_1sec_170ms

CPU clocks will affect the score by a few seconds. Get your tFAW and tRFC down as low as you can go to get that last second shaved off. I didn't have time to try again yet, but this is my best so far. I think I would have a better score with 6800 MT/s CL30 1T.

 

[The King]

5600 Stock Auto in BIOS. RAM 3800 CL14. (78W)

 

[oobymach]

Here's what my 5600x does

 

[The King]

 

[glnn_23]

12900k 8 cores / 16 Threads

Closest I can set in bios AVX512 is max frequency - 100MHz.

 

[Det0x]

Guess i can share my old 5800x3d results, 4450mhz max

 

[The King]

5600 Stock Auto in BIOS. RAM 3800 CL14. (78W)

View attachment 249710

 

[glnn_23]

Slight improvement with cpu and mem speed.

 

[Petar666]

Slight improvement with cpu and mem speed.

View attachment 253936

The result is great, what do you use to cool it? The processor voltage at 5.5 is great

 

[glnn_23]

The result is great, what do you use to cool it? The processor voltage at 5.5 is great

Using 2 x 360 HWlabs rads for cpu and a 120mm fan over dimms.
Winter here in Australia, so cool ambient.
AVX512 running at 5.4

 

[Det0x]

7950x makes and appearance

 

[glnn_23]

A little more testing, including YC Pi-2.5b.
7950x.

 

[The King]

@glnn_23 Are you running HWINFO in the background during the run?
Best to close all background app even disconnect from the internet when doing a run it can shave off some time.

 

[glnn_23]

@glnn_23 Are you running HWINFO in the background during the run?
Best to close all background app even disconnect from the internet when doing a run it can shave off some time.

Yes I had HWINFO and Aida64 running in the background. . This was more to play with voltages and use Y cruncher and RamTest for stability testing.

 

[glnn_23]

 

[Det0x]

 

[Deleted member 185158]

Y-cruncher has been my new thing lately.
What a treat.
Here's under 4 minutes with a dual core.

Celeron G6900.
Patriot C36 series (Samsung ic).
Asus B660-G (external clock gen).
GTX 980KPE.
SAMSUNG 980pro 1tb.
Antec CP series 850w.

237.058s

 

[ir_cow]

You guys should start submitting to HWBOT.

 

[Deleted member 185158]

You guys should start submitting to HWBOT.

Already did.
That is 5th place of all dual cores submitted and 2nd place for the cpu model.

ShrimpBrime`s y-cruncher - Pi-2.5b score: 3min 57sec 58ms with a Celeron G6900

The Celeron G6900 @ 5174.7MHzscores getScoreFormatted in the y-cruncher - Pi-2.5b benchmark. ShrimpBrimeranks #11 worldwide and #3 in the hardware class. Find out more at HWBOT.

hwbot.org