yes a new issue!!

Chewers · Jan 17, 2011

First drop bios to defaults, then check, does your MB support your ram, if its not helping. leave only one stick of memory and run memtest, if error found - remove stick, place another stick in Dimm 1 and run test again, if error, couninue step one test. if no errors try to boot.

overclocking101 · Jan 17, 2011

stop, breathe, now go into your bios, rest all default settings, restart, go into bios up imc/vtt to 1.4v that should be enough for 12gb. then run memtest with all sticks in again

jsfitz54 · Jan 17, 2011

CORRECT BIOS?

IS THIS YOUR BOARD? http://gigabyte.com/products/product-page.aspx?pid=3571#bios F3e Beta Bios..

There are several x58 boards, some with different manufacture revisions (same board two versions...)

On the memory: what is the posted speed of memory and is it ddr1600? I would try 3 main slots (grey), not all 6 to start OR follow overclocking101 advice above for all 6. Manual pg.16.

Advanced Memory Settings Tab in Bios set XMP to Enable...pages 38 & 39 in Manual. That should allow mobo to read the speed settiings of the memory correctly at a (2t/2n setting...most universal)

Windows 7.... 32 or 64bit? Home, Pro, Ultimate? PLEASE REVISE SYSTEM SPEC PAGE. I believe Home edition has memory limitations in 32 and 64 bit versions.

Chewers · Jan 17, 2011

jsfitz54 said:
CORRECT BIOS?

http://gigabyte.com/products/product-page.aspx?pid=3265&dl=1#bios See " New Available" in RED on right side.

http://gigabyte.com/products/product-page.aspx?pid=3571#bios

IS THIS YOUR BOARD? http://gigabyte.com/support-downloads/download-center.aspx

There are several x58 boards, some with different manufacture revisions (same board two versions...)

On the memory: what is the posted speed of memory and is it ddr1600? I would try 3 main slots not all 6 to start.

His MB is GA-X58-USB3

newguy24 · Jan 17, 2011

overclocking101 said:
stop, breathe, now go into your bios, rest all default settings, restart, go into bios up imc/vtt to 1.4v that should be enough for 12gb. then run memtest with all sticks in again

im going to try this first

jsfitz54 said:
CORRECT BIOS?

http://gigabyte.com/products/product-page.aspx?pid=3265&dl=1#bios See " New Available" in RED on right side.

IS THIS YOUR BOARD? http://gigabyte.com/products/product-page.aspx?pid=3571#bios F3e Beta Bios..

There are several x58 boards, some with different manufacture revisions (same board two versions...)

On the memory: what is the posted speed of memory and is it ddr1600? I would try 3 main slots (grey), not all 6 to start OR follow overclocking101 advice above for all 6. Manual pg.16.

Advanced Memory Settings Tab in Bios set XMP to Enable...pages 38 & 39 in Manual. That should allow mobo to read the speed settiings of the memory correctly at a (2t/2n setting...most universal)

Windows 7.... 32 or 64bit? Home, Pro, Ultimate? PLEASE REVISE SYSTEM SPEC PAGE. I believe Home edition has memory limitations in 32 and 64 bit versions.

if errors found ill come back an answer these questions bud.

newguy24 · Jan 17, 2011

ok how do i restore to default?? there is no option in bios....also it doesnt show anything along the lines of imc/vtt.......... is there a default bios i could flash?? i may have put wrong or outdated bios on here...

erocker · Jan 17, 2011

newguy24 said:
ok how do i restore to default?? there is no option in bios....also it doesnt show anything along the lines of imc/vtt.......... is there a default bios i could flash?? i may have put wrong or outdated bios on here...

Remove the battery for a few minutes. Or, look in the manual, find the clear CMOS jumper and do it that way. Make sure the board is powered down at the time.

newguy24 · Jan 17, 2011

erocker said:
Remove the battery for a few minutes. Or, look in the manual, find the clear CMOS jumper and do it that way. Make sure the board is powered down at the time.

lmfao...battery??

jsfitz54 · Jan 17, 2011

Bios setup default is located on page 56 of manual. Never mind the battery. At least not yet.

erocker · Jan 17, 2011

newguy24 said:
lmfao...battery??

What's funny? It's the round shiny thing on your motherboard. They've been there forever. You should really read through your manual.

newguy24 · Jan 17, 2011

does this help at all, just something that shows bios and info...looking at manual now

erocker · Jan 17, 2011

newguy24 said:
[url]http://img207.imageshack.us/img207/552/49163293.png[/URL]

does this help at all, just something that shows bios and info...looking at manual now

No, doesn't help.

The battery is circled:

jsfitz54 · Jan 17, 2011

Battery most likely button cell CR2032/DL2032 (2cm in diameter) 3volt.

Try Bios F3e.

newguy24 · Jan 17, 2011

i took battery out for about 15min....booted up fine how do i know it worked?

erocker · Jan 17, 2011

newguy24 said:
i took battery out for about 15min....booted up fine how do i know it worked?

All of your bios setting will be reverted to default.

newguy24 · Jan 17, 2011

ok so if i run memtest again and it looks the same as before...with memory setting in wack...then what?? ill run memtest and see if its the same.

MxPhenom 216 · Jan 17, 2011

newguy24 said:
ok so if i run memtest again and it looks the same as before...with memory setting in wack...then what?? ill run memtest and see if its the same.

Have you not read what erocker said about upping some voltages??

newguy24 · Jan 17, 2011

nvidiaintelftw said:
Have you not read what erocker said about upping some voltages??

yes i read it but im trying someone ells suggestion, if ya seen the comments above...."reset bios and scan all memory again." so i have done that and the memory came up error once again, but the timings also showed the same as above(wrong)....so should i scan each stick solo?? or would i have to set the 1600 memory to the correct timings first?
would the error, show up if the memory is set wrong? also how do i set it?

brandonwh64 · Jan 17, 2011

Take out all ram except one(put the single stick in DIMM 1) and then rescan, if no errors then move to another stick and continue until you have scanned all sticks. once you located your bad stick/s* you can install whatever you have good until you get new RAM

newguy24 · Jan 17, 2011

ok ill do that....do i still need to set the ram to its correct timings?

EastCoasthandle · Jan 17, 2011

Yeah you should but you should work with the 1st set of 3 sticks (based on what came in the package) to make sure there is no problem. Then the other 3 sticks. If you havent' done so already.

brandonwh64 · Jan 17, 2011

newguy24 said:
ok ill do that....do i still need to set the ram to its correct timings?

Set the ram timings to the setting that the ram says its stock, you may also set the stock speed and voltage as well

dr emulator (madmax) · Jan 17, 2011

holy flip calm down, rome wasn't built in a day :laugh:

your memory should run just fine at default speeds, worry about xmp profiles later

like has been said before (and this will take time) switch of the computer and take all but 1 stick out, then run memtest, then after it's run, switch your pc on and boot it properly
then run a memory intensive program, if all is well switch off pc and take good memory out and put it to one side (preferably in it's box)

repeat until bad stick is found voila

jsfitz54 · Jan 18, 2011

XMP is a shortcut to get to the programmed ram settings provided by the vendor and it is on the memory stick. It is also known as the SPD: http://en.wikipedia.org/wiki/Serial_Presence_Detect

Scroll down to DDR3 then a little further for XMP/Intel.

So using XMP should get you there faster. Once the memory is correctly set then raise the voltage for all 6 banks.

Here is a comment off newegg website for ddr2000:

Manufacturer Response:
.
Dear Customer

We are sorry to hear you are having issues with this memory package. This memory package is above the standard, so manual settings will be required. On AUTO, the motherboard will not be able to detect the proper memory settings to operate the memory. The easiest way to configure the memory is by enabling the XMP Profile. Afterwards, you will simply need to find the lowest stable value for QPI/DRAM Voltage (memory controller), and the system should operate fine. If you feel you need assistance with this, please contact our technical support department and they will be able to assist you.

Thank you
GSKILL SUPPORT

Quality and customer service are our top priorities.

Tech Support Email: ustech@gskillusa.com
RMA Dept Email: rma@gskillusa.com
G.Skill Forum: http://www.gskill.us/forum/

System Name	Calculator 2.0
Processor	Intel Core i7 3770K
Motherboard	Asus Maximus V Formula
Cooling	Corsair H100i
Memory	16GB Corsair Veneance 2133MHz
Video Card(s)	Asus DirectCU II GTX670
Storage	2X Intel 330Series 120GB at RAID0
Display(s)	Samsung T24B300EEC
Case	Corsair 500R White
Audio Device(s)	SupremeFX IV
Power Supply	Corsair AX760i
Software	Windows 7 Home Premium x64
Benchmark Scores	Pending

System Name	The wifes worst enemy
Processor	i5-9600k
Motherboard	Asrock z390 phantom gaming 4
Cooling	water
Memory	16gb G.skill ripjaw DDR4 2400 4X4GB 15-15-15-35-2T
Video Card(s)	Asrock 5600xt phantom gaming 6gb 14gb/s
Storage	crucial M500 120GB SSD, Pny 256GB SSD, seagate 750GB, seagate 2TB HDD, WD blue 1TB 2.5" HDD
Display(s)	27 inch samsung @ 1080p but capable of much more ;)
Case	Corsair AIR 540 Cube Mid tower
Audio Device(s)	onboard
Power Supply	EVGA GQ1000W MODULAR
Mouse	generic for now
Keyboard	generic for now
Software	gotta love steam, origin etc etc
Benchmark Scores	http://hwbot.org/user/philbrown_23/

Processor	Intel i7 970 // Intel i7 2600K
Motherboard	Asus Rampage III Formula // Asus P8P67 Deluxe
Cooling	Zalman CNPS9900MaxB // Zalman CNPS11X
Memory	GSkill 2133 12GB // Corsair V 2400 32GB
Video Card(s)	ASUS GTX1080 // MSI GTX1070
Storage	Samsung 870EVO // Samsung 840P
Display(s)	HP w2207h
Case	CoolerMaster Stacker 830se // Lian Li PC-9F
Audio Device(s)	onboard
Power Supply	Seasonic X 850w Gold // EVGA 850w G2
Mouse	Logitech G502SE HERO, G9
Keyboard	Dell
Software	W10 Pro 22H2

System Name	Calculator 2.0
Processor	Intel Core i7 3770K
Motherboard	Asus Maximus V Formula
Cooling	Corsair H100i
Memory	16GB Corsair Veneance 2133MHz
Video Card(s)	Asus DirectCU II GTX670
Storage	2X Intel 330Series 120GB at RAID0
Display(s)	Samsung T24B300EEC
Case	Corsair 500R White
Audio Device(s)	SupremeFX IV
Power Supply	Corsair AX760i
Software	Windows 7 Home Premium x64
Benchmark Scores	Pending

Processor	Intel Core i7-950 3.07ghz
Motherboard	Gigabyte X58-usb3
Cooling	Hyper 212 plus
Memory	12gb 6x2GB geil
Video Card(s)	HD6870
Storage	1tb samsung spinpoint
Display(s)	LG e2350 monitor
Case	Lancool PC-k62
Power Supply	Corsair HX850watt
Software	Windows 7

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS TUF x670e
Cooling	EK AIO 360. Phantek T30 fans.
Memory	32GB G.Skill 6000Mhz
Video Card(s)	Asus RTX 4090
Storage	WD m.2
Display(s)	LG C2 Evo OLED 42"
Case	Lian Li PC 011 Dynamic Evo
Audio Device(s)	Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply	FSP Hydro Ti PRO 1000W
Mouse	Razer Basilisk V3 Pro
Keyboard	Tester84
Software	Windows 11

System Name	Ryzen Reflection
Processor	AMD Ryzen 9 5900x
Motherboard	Gigabyte X570S Aorus Master
Cooling	2x EK PE360 \| TechN AM4 AMD Block Black \| EK Quantum Vector Trinity GPU Nickel + Plexi
Memory	Teamgroup T-Force Xtreem 2x16GB B-Die 3600 @ 14-14-14-28-42-288-2T 1.45v
Video Card(s)	Zotac AMP HoloBlack RTX 3080Ti 12G \| 950mV 1950Mhz
Storage	WD SN850 500GB (OS) \| Samsung 980 Pro 1TB (Games_1) \| Samsung 970 Evo 1TB (Games_2)
Display(s)	Asus XG27AQM 240Hz G-Sync Fast-IPS \| Gigabyte M27Q-P 165Hz 1440P IPS \| Asus 24" IPS (portrait mode)
Case	Lian Li PC-011D XL \| Custom cables by Cablemodz
Audio Device(s)	FiiO K7 \| Sennheiser HD650 + Beyerdynamic FOX Mic
Power Supply	Seasonic Prime Ultra Platinum 850
Mouse	Razer Viper v2 Pro
Keyboard	Razer Huntsman Tournament Edition
Software	Windows 11 Pro 64-Bit

System Name	MY PC
Processor	E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard	Maximus Formula
Cooling	D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory	XMS 8500C5D @ 1066MHz
Video Card(s)	HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage	2
Display(s)	24"
Case	P180
Audio Device(s)	X-fi Plantinum
Power Supply	Silencer 750
Software	XP Pro SP3 to Windows 7
Benchmark Scores	This varies from one driver to another.

System Name	not very good (wants throwing out window most of time)
Processor	xp3000@ 2.17ghz pile of sh** /i7 920 DO on air for now
Motherboard	msi kt6 delta oap /gigabyte x58 ud7 (rev1.0)
Cooling	1 green akasa 8cm(rear) 1 multicoloured akasa(hd) 1 12 cm (intake) 1 9cm with circuit from old psu
Memory	1.25 gb kingston hyperx @333mhz/ 3gb corsair dominator xmp 1600mhz
Video Card(s)	(agp) hd3850 not bad not really suitable for mobo n processor/ gb hd5870
Storage	wd 320gb + samsung 320 gig + wd 1tb 6gb/s
Display(s)	compaq mv720
Case	thermaltake XaserIII skull / coolermaster cm 690II
Audio Device(s)	onboard
Power Supply	corsair hx 650 w which solved many problems (blew up) /850w corsair
Software	xp pro sp3/ ? win 7 ultimate (32 bit)
Benchmark Scores	6543 3d mark05 ye ye not good but look at the processor /uknown as still not benched

yes a new issue!!

New Member

New Member

New Member

New Member

*

New Member

*

New Member

*

New Member

*

New Member

ASIC Engineer

New Member

Addicted to Bacon and StarCrunches!!!

New Member

New Member

Addicted to Bacon and StarCrunches!!!