Your PC ATM

[Vario]

As long as it still cools, i dont give a shit really. once i switch to the front EK quantum dist plate and quantum CPU block though in Jan, i am gonna make sure there is stuff in the water to negate this as much as possible.

Hopefully doesn't cause any lasting issue. Good thing you noticed it.

 

[Deleted member 24505]

Hopefully doesn't cause any lasting issue. Good thing you noticed it.

Everything else is either copper or brass. Not sure about the barbs i am using though, could be them maybe?

• Barb: 1/4 to 3/8 Barb Fitting (Black Chrome) Brass underneath coating?
• 

Everything else is EK, Both EK radiators, one PE, one CE, can't be tank as it's acrylic. GPU block is copper/acrylic.

 

[Vario]

Everything else is either copper or brass. Not sure about the barbs i am using though, could be them maybe?

• Barb: 1/4 to 3/8 Barb Fitting (Black Chrome) Brass underneath coating?
• View attachment 229942

Everything else is EK, Both EK radiators, one PE, one CE, can't be tank as it's acrylic. GPU block is copper/acrylic.

Black chrome is sometimes black nickel plating (alloy deposition of nickel and zinc) rather than chromium. Don't know if that could be an issue.

 

[FireFox]

http://imgur.com/a/SbulxIi

http://imgur.com/a/EdInBam

 

[JayEe]

Hi guys

As a new member here, i just post some pics of my setup.

 

[Deleted member 24505]

Been modifying my AIDA64 tablet sensor panel, added the CPU usage % boxes. Bloody took a while.

 

[Vario]

Hi guys

As a new member here, i just post some pics of my setup.

Nice computer!

 

[seth1911]

Im still waiting for my order

Athlon II 651K
ASUS F1A55-V
PCIE to M.2
GTX 980

 

[vabeachboy0]

Just finished this, a couple of minor things to do still.

 

[Caring1]

Where's the fish?

 

[AlwaysHope]

My "old" Nanoxia Deep Silence 5 rev.B case with all the HD cages removed & all optical drive external brackets gone from front compartment. Soon to be replaced with Corsair ML140 modified to fit into this empty compartment to get more tunnelling of air flow towards vital components. Gotta keep this rocket lake based rig cool as...
Notice NO arpg bling! just the way I like it.



Ram clearance is unbelievably so close to CPU HS, its amazing it just fits, glad the heat spreaders in a way fell off during ram testing, all except 1 side of 1 stick ....

The bottom right side fans I might replace with Corsair ML140s, lucky this case has excellent sound repression abilities, the inside then will be almost like gale force wind speeds when operating at max rpm!

 

[MxPhenom 216]

My build i just finished

Ryzen's Reflection » builds.gg

View attachment 217854

Rev2 of Ryzen's Reflection is now Blue Onyx

Blue Onyx » builds.gg

 

[RJARRRPCGP]

Ram clearance is unbelievably so close to CPU HS, its amazing it just fits, glad the heat spreaders in a way fell off during ram testing, all except 1 side of 1 stick ....
View attachment 230489

That's no surprise at all with very-recent Intel builds (at least since Comet Lake and Z490)

 

[nologin666]

Hi People,
I am new in here and it's nice to meet you all.

Here is my new build with some photo while experimenting until last result.
Share your thoughts please

Components:
CPU: i9-11900K
Cooler: EK-AIO 360 D-RGB or possibly NZXT Kraken X73
MB: Asus Maximus XIII Extreme
RAM: G.Skill 2x16G (32G)
GPU: iChill Nvidia RTX 3080 Ti x4
SSD: 3xM.2 Samsung 980 PRO 1T (PCIe 4)
Case: Lian Li o11 Dynamic XL
6 Corsair QL 120 Fans
5'' HDMI Display for AIDA64 stats (pics and widget pictures are from aida64 forum)
43'' 4K 60 MHz LG TV (to be replaced with a monitor in future)

Here are results with a few overclock attempts:

Result

www.3dmark.com

Cheers,

 

[Kissamies]

Hard tubing looks cool but I wouldn't have the mental capacity to measure and bend the tubes etc., so I'll go with soft tubing.

@nologin666 peel the sticker from the logo your AIO's block

 

[Deleted member 24505]

Hard tubing looks cool but I wouldn't have the mental capacity to measure and bend the tubes etc., so I'll go with soft tubing.

@nologin666 peel the sticker from the logo your AIO's block

Once i get the same plate as this for my case, i'll be doing the tubing like this. Not many bends so will not be too bad. this is the same case as mine, with the same front plate i am getting. Ordering the plate about 6th jan

 

[Kissamies]

Once i get the same plate as this for my case, i'll be doing the tubing like this. Not many bends so will not be too bad. this is the same case as mine, with the same front plate i am getting.
View attachment 230715

The price of the fittings is already more scary than any horror movie I've ever seen. All that spending just for the looks isn't worth it for a poor guy like me. I'll probably just add a GPU block to the loop when I can afford it.

 

[Deleted member 24505]

The price of the fittings is already more scary than any horror movie I've ever seen. All that spending just for the looks isn't worth it for a poor guy like me. I'll probably just add a GPU block to the loop when I can afford it.

The hardline fittings will be about £100, i will need 16x14mm OD. The plate itself is £329. If i'm lucky, i should get £50 for my old D5 pump and res though.

 

[RJARRRPCGP]

The price of the fittings is already more scary than any horror movie I've ever seen.

Sounds like video-card-price-crisis-level-bad!

 

[MxPhenom 216]

Hard tubing looks cool but I wouldn't have the mental capacity to measure and bend the tubes etc., so I'll go with soft tubing.

@nologin666 peel the sticker from the logo your AIO's block

its not hard at all if you plan your runs well enough that you only need to do 1 to 2 bends per run. I eye ball everything, not much measuring needed really. Just get enough tubing if you mess up.

 

[Kissamies]

its not hard at all if you plan your runs well enough that you only need to do 1 to 2 bends per run. I eye ball everything, not much measuring needed really. Just get enough tubing if you mess up.

Yeah but I just don't see it worth it as I'd need to get new fittings, something to heat and bend the tubes etc., too much hassle and I could get something useful for that price. I do still admit that some loops with hardtubes look hella cool.

Soft tubing gives that cool olcschool vibe tho.

 

[AlwaysHope]

Hi People,
I am new in here and it's nice to meet you all.

Here is my new build with some photo while experimenting until last result.
Share your thoughts please
View attachment 230700View attachment 230701View attachment 230702View attachment 230703View attachment 230704View attachment 230705View attachment 230706View attachment 230700View attachment 230701View attachment 230702View attachment 230703View attachment 230704View attachment 230705View attachment 230706

Components:
CPU: i9-11900K
Cooler: EK-AIO 360 D-RGB or possibly NZXT Kraken X73
MB: Asus Maximus XIII Extreme
RAM: G.Skill 2x16G (32G)
GPU: iChill Nvidia RTX 3080 Ti x4
SSD: 3xM.2 Samsung 980 PRO 1T (PCIe 4)
Case: Lian Li o11 Dynamic XL
6 Corsair QL 120 Fans
5'' HDMI Display for AIDA64 stats (pics and widget pictures are from aida64 forum)
43'' 4K 60 MHz LG TV (to be replaced with a monitor in future)

Here are results with a few overclock attempts:

Result

www.3dmark.com

Cheers,

Curious, where's the PSU?

 

[Deleted member 24505]

Curious, where's the PSU?

Its on its side at the bottom behind the MB tray, i have the same case

 

[AlwaysHope]

Its on its side at the bottom behind the MB tray, i have the same case
View attachment 230722

That's an interesting development in case design.

 

[Deleted member 24505]

That's an interesting development in case design.

You can actually use 2 or 3 PSU's or move it up. It will fit in any of the 3 bays, you just move the 3.5" HDD bays, or remove them.