Your PC ATM

[FoulOnWhite]

Got fitted up in new Antec cx800 case. The stock RGB fans were turd and have gone in the bin, using my 6 good noc fans for a chimney setup. Just got to connect them all up with my OCTO controller later today. Still has film on glass btw

 

[avidgamer121]

installed a fan filter that doesn't belong to my case

 

[SN2716057]

Good enough, imo.

 

[Chinese player Mr. Wang]

My setup has changed. I still have the old Corsair 680X case but removed mall the old corsair commander pro and put in the new ICUE setup with fans, and cooler. The wiring at the back needs tidying but that's on my agenda when on holiday. Thinking of getting the corsair 4000D case

Hello, I would like to ask if AIDA64 and hwinfo software can skip ICUE and directly monitor the temperature sensor data on Corsair Commander PRO and display the values in AIDA64 and hwinfo software to facilitate taking screenshots of all temperature values with one click.

 

[Ruru]

Got a 3-pack of Coolermaster Sickleflow 120 ARGB fans so I put them on my 360 radiator.

 

[jallenlabs]

Since I finished my Ferrari XPS512tr build, I figured the room better get some attention as well. Super low budget, so its not really even complete yet, but almost. here is what it looks like now.

Red curtains- $17
Painted my speakers with Rosso enamel spray paint $6
Red Paracontrol mousepad $20
Little Red Office Lamp $9
Ferrari Lisc Plate $8
Lego Ferrari kits x2 $Gifts
Ferrari 70th Anniversary Limited thumb drive $40
Racing Seat phone holder $9
Ferrari coffee cup $7
Ferrari prints x3 1 of v12 engine bay, 1 of f40 blue print and 1 portrait of Lewis Hamilton (all not shown).
The Ferrari XPS512tr PC build $ no idea, way to much $$

I had planned a red rug with Ferrari shield on it, but order got messed up and I havent reordered yet. I still need to get the prints printed out and then framed and then I am replacing the keycaps with custom keys and then a newer, wireless mouse too.

 

[InVasMani]

Just missing a Italian plumber or two on that desk.

 

[jallenlabs]

Just missing a Italian plumber or two on that desk.

Funny you mention that. Pretty sure my home theater has, lets see.... 4 of them! Big Mario Cart fan.

 

[de.das.dude]

Got a 3-pack of Coolermaster Sickleflow 120 ARGB fans so I put them on my 360 radiator.

View attachment 406254

are the sickle flow good for pressure? i use them as my normal case fans. I like non argb so it works for me well as they are decently cheap and throw a lot of air!

 

[Ruru]

are the sickle flow good for pressure? i use them as my normal case fans. I like non argb so it works for me well as they are decently cheap and throw a lot of air!

I guess they are, at least according to their manufacturer's specs. Didn't notice anything special what it came to temps with the older Alphacool Pure Wings vs these.

 

[freeagent]

Got my new 92mm and 80mm fan today, had to get them in haha. The 92 is RGB because I wanted a little bit of light at the bottom to give the case some balance when the room is dark. Also had to put my retro grill guard on because I finally have a fan that it fits lol..

Also.. white light for the picture, but rainbow bright when we are alone

 

[micropage7]

not server , old HP mid tower case, this machine basically for backup, browsing and do some photoshop, now most of time i use laptops

 

[Kwadratowicz]

not server , old HP mid tower case, this machine basically for backup, browsing and do some photoshop, now most of time i use laptops

I love custom washers on hard drives (and idea of stair stepping for sata is great it looks clean )
But the hard drive cage is looking away

I think it is cause of different cable color connected to it

 

[micropage7]

I love custom washers on hard drives (and idea of stair stepping for sata is great it looks clean )
But the hard drive cage is looking away
View attachment 406853
I think it is cause of different cable color connected to it

actually it's removable 3,5 inch drive bay, i ditched the mechanism since i don't need that and just using the front and the steel frame, that's why it looks hanging somewhere. it actually wiggle little bit but so far it doesn't affect anything

 

[jallenlabs]

My latest, progress.

 

[malons]

Sorry air but I love water to much

 

[Makalite]

I had some problems after refitting the XTX cooler when applying better thermal putty on the memory chips and PTM7950 on the core, temps were worse.
Apparently it was because I had placed the case in a tighter enclosed space, it now sits on top of a stack of wooden shelves next to a window and I upgraded the fans to a pair of Noctua's latest 140MM NF-A14X25 G2's dedicated to the lower portion of the front panel and the section which blows straight over the GPU.

The other Noctua are NF-S12A.

The fans on the 2800MM are provided by Alphacool and are exceptionally quiet and keep my 14600K very cold.

Here we see the quality of Patriot Viper Venom 7000 DIMMS, the one heatspreader always removes it's self, though not affecting functionality.

I wanted to expand the loop to a GPU W/C solution from Alphacool, but they were either stupidly expensive or out of stock so did the minimum to maximise it's cooling solution already.

Works great.

Here is showing how Wii accessories can still be useful.