Discussion in 'Cases, Modding & Electronics' started by DaMulta, Jul 7, 2008.
That's gonna be a bit of a challenge!
i want it to be standing in the front, remove both hd cages, make a cut in dvd cage thingie, make custom mmounts for the rad, and voila
They do carry rad brackets to hold them in places like that.
I look forward to seeing the new setup
with something like this or? http://www.aquatuning.de/product_info.php/info/p11252_XSPC-120mm-Universal-Radstand.html
Yep. Something like that. Or even the EK version.. It's smaller but not well worth it if you can get something like that.
There's a bunch here:
The Benq is the best as it is a 2ms screen. The Acer is very close to it and the Dell is lucky last. I like the Acer for its thin bezel though.
Looks like all those are older models? Except for the Dell. I'm looking for new monitors BTW...
How should I mount my radiator?
Cooling CPU only, res/pump combo will be in the middle two 5.25" bays.
Corsair H100 just came in today!
Nice and clean, what are your temps like ?
Well I like A, with the hoses over in the cabling area. Just curious about where the fan configuration. Is there a case fan above the radiator, or will is there room to put fans below it later?
Looks very nice. Surprised you have room for the radiator and the fans.
H100 looks pretty slick!
Top fans are ghosted under the top mesh of the 600T. Still deciding whether they're going to be intake or exhaust, though. My GTX 570 does put out a decent amount of heat, but it's not like my 2500K at 4GHz is going to be hard for that rad to cool.
I'd go with A, since the tubing can then come straight up from the drive bays into the rad, then the CPU block, then a nice clean straighter shot back to the res/pump combo. Looks like a slick machine.
Yep all 650d's or 600t models and up will be able to support 2 radiators + 4 fans (H100)
That's absolutely false. With my 600T, I had to buy a super thin radiator, and I won't be able to push/pull either. I'll post pictures later with proof.
Sorry I meant with the H100, all corsair cases should be able to fully support it's twin radiators no problems. Proven with ant's pics.
Snapped a shit quality picture with my ipod. Hahha, been doing a bit of cable management with the three gpu's inside! As for the all black look, does anybody dig? Or should I put some led fans? I have some good blue Antec 3 speeds I can shove in there. 5 fans for $150. 25$ each, a ripoff I hear?
I'll take some better quality photos a bit later with an actual camera :/
THe H100 would work in the 600T with the radiator mounted where the stock top fan is, and the fans mounted under the top mesh like mine will be.
The 600T's top mounts are about 33mm from the top of an ATX motherboard, the Black Ice GT Stealth radiator that I got is 30mm thick and barely clears my MOSFET cooler. The H100's radiator is 27mm thick, so it will work, but you won't be able to use push/pull in a 600T.
I vote for A, DD. Cleaner tubing IMO.
I'd also have to say A is looking the best bet for clean n tidy run as long as you use some 90deg connectors for nice straight lines
yep, thats going in there too
thats a 1.5Liter bottle next to it
orange soda in loop
Wow not sure how that will fit . . . .(that's what she said) .. . ..
Separate names with a comma.