- Joined
- Sep 23, 2022
- Messages
- 901 (1.63/day)
System Name | Windows |
---|---|
Processor | 13900K |
Motherboard | MSI Pro Z790-A WiFi |
Cooling | Noctua NH-D15s |
Memory | 32GB 6600 CL32 |
Video Card(s) | RTX 4090 |
Display(s) | MSI MAG401QR |
Case | Phanteks P600s |
Audio Device(s) | Schiit Modi MB / Valhalla 2 & Asgard 3 |
Power Supply | Vertex GX-1000 |
Software | Windows 11 Pro 23H2 |
Benchmark Scores | They suck. |
Thanks for checking the size!I have the EZDIYFAB support sitting on my desk so I did some measurements. Completely retracted it's still about the height of two PCIe slots. Fully extended it reaches about 4.3". Eyeballing it seems like it might fit your case easily
I couldn't remember the exact measurement, so I grabbed the ruler. Looks like I need 62-64mm max height. The EZDYI says it starts at 67mm. It might work depending on how exact their measurements are. The card itself is pretty stiff too. Not as much flex as the Red Devil has. I have an idea that might work using a nut as the base with some form of pad/silicone at the bottom with a bolt that could be used for adjustment with another pad at the contact point on the GPU. I'll see what I can find at Lowe's (hardware store) tomorrow, and might order the EZDYI if I can't make that work. I can always get the Dremel out.
Last edited: