Hey everyone, im build new PC but still want windows 7 with windows 10 for new games
i have tried this before on friend pc Aorus H370 with nvme after install, the fist booting BSOD, could't work it out so went with windows 10 but very glitchy with old games
i have seen posts about Z370 motherboard work with windows 7.
Will it matter i use 9600KF instead of 8700k/9700k with Gigabyte Z370 XP SLI ?
Will be using NVMe 1TB
Cheers
You should be able to run 9600KF and the NVMe, usually what causes problems for people is (1) the USB keyboard and mouse failing to work during the install and (2) the NVMe not being accessible by Windows 7 because Windows 7 does not have the USB 3 and NVMe drivers native to its installer. Lastly, (3) Windows Update...
(1)
You could use an old PS/2 compatible keyboard, the kind that does not have a USB Plug, instead it has the cylindrical PS/2 plug. Once you have Windows 7 loaded you can install the XHCI USB 3.x drivers and plug in your normal USB keyboard and mouse if you were using a PS/2 keyboard or mouse before.
Or you could try modifying the Windows 7 installer image using the Gigabyte Windows Image Tool. This would allow you to add NVMe and USB drivers into the Windows 7 installer.
If you want to try adding the drivers, you can use this image tool:
download.gigabyte.us/FileList/Utility/mb_utility_windowsimagetool_z370.zip and Add USB drivers ...
(2)
The other problem you can run into is Windows 7 not recognizing the NVMe drive if Windows 7 does not already have the NVMe drivers. It is similar to the USB issue and you may be able to remedy it with that Gigabyte image tool by selecting Add NVMe drivers ... after selecting Add USB drivers ...
Otherwise, if you have a spare drive, install first to the spare SATA HDD or SSD with the NVMe drive removed from your computer. Shutdown and physically install the NVMe drive into the M2 slot, reboot and install the necessary Windows 7 NVMe drivers. After that is complete, check that Windows 7 can read and write to the NVMe in your My Computer. Once that works, you could use an imaging software such as Samsung Disk Migration if Samsung or Acronis True Image, Macrium Reflect, etc to image over your NVMe drive with a clone of the C:\ SATA HDD/SSD. Then shut down, remove the C:\ SATA HDD/SSD and boot off the NVMe.
(3)
Windows 7 can be tricky to start updating sometimes in 2020, before running Windows Update, you would install the update rollups:
1) Windows6.1-KB3020369-x64.msu
2) Windows6.1-KB3172605-x64.msu
This will allow Windows 7 to start downloading updates.
Finally you run Windows Update until it stops updating and displays the "Unsupported Processor" Message. Then install WUFUC:
https://github.com/zeffy/wufuc