Report an Error

Intel Arctic Sound 1T

Graphics Processor
Arctic Sound
Cores
6144
TMUs
192
ROPs
96
Memory Size
16 GB
Memory Type
HBM2e
Bus Width
4096 bit
This product is not released yet.
Data on this page may change in the future.
The Arctic Sound 1T will be a professional graphics card by Intel, that is expected to launch in 2021. Built on the 10 nm process, and based on the Arctic Sound graphics processor, the card supports DirectX 12. The Arctic Sound graphics processor is an average sized chip with a die area of 190 mm² and 8,000 million transistors. Unlike the fully unlocked Arctic Sound 2T, which uses the same GPU but has all 7680 shaders enabled, Intel has disabled some shading units on the Arctic Sound 1T to reach the product's target shader count. It features 6144 shading units, 192 texture mapping units, and 96 ROPs. Intel has paired 16 GB HBM2e memory with the Arctic Sound 1T, which are connected using a 4096-bit memory interface. The GPU is operating at a frequency of 900 MHz, memory is running at 1200 MHz.
Being a dual-slot card, the Intel Arctic Sound 1T does not require any additional power connector, its power draw is rated at 350 W maximum. This device has no display connectivity, as it is not designed to have monitors connected to it. Arctic Sound 1T is connected to the rest of the system using a PCI-Express 4.0 x16 interface. The card measures 267 mm in length, and features a dual-slot cooling solution.

Graphics Processor

GPU Name
Arctic Sound
Architecture
Generation 12.5
Foundry
Intel
Process Size
10 nm
Transistors
8,000 million
Die Size
190 mm²

Graphics Card

Release Date
2021
Generation
Xe Graphics
Production
Unreleased
Bus Interface
PCIe 4.0 x16

Clock Speeds

GPU Clock
900 MHz
Memory Clock
1200 MHz
2.4 Gbps effective

Memory

Memory Size
16 GB
Memory Type
HBM2e
Memory Bus
4096 bit
Bandwidth
1,229 GB/s

Render Config

Shading Units
6144
TMUs
192
ROPs
96
Execution Units
384
L2 Cache
8 MB

Theoretical Performance

Pixel Rate
86.40 GPixel/s
Texture Rate
172.8 GTexel/s
FP16 (half) performance
22.12 TFLOPS (2:1)
FP32 (float) performance
11.06 TFLOPS
FP64 (double) performance
2.765 TFLOPS (1:4)

Board Design

Slot Width
Dual-slot
Length
267 mm
10.5 inches
TDP
350 W
Suggested PSU
750 W
Outputs
No outputs
Power Connectors
None

Graphics Features

DirectX
12 (12_1)
OpenGL
4.6
OpenCL
3.0
Vulkan
N/A
Shader Model
6.5

Card Notes

all specs unknown