Report an Error

ATI 3D Rage PRO AGP

ATI 3D Rage PRO AGP Image ATI 3D Rage Pro Image
The 3D Rage PRO AGP was a graphics card by ATI, launched in March 1997. Built on the 350 nm process, and based on the 3D Rage Pro graphics processor, in its 3D Rage PRO AGP variant, the card supports DirectX 6.0. The 3D Rage Pro graphics processor is a relatively small chip with a die area of only 80 mm² and 8 million transistors. It features 1 pixel shaders and 0 vertex shaders, 1 texture mapping units and 1 ROPs. Due to the lack of unified shaders you will not be able to run recent games at all (which require unified shader/DX10+ support). ATI has placed 2 MB SDR memory on the card, which are connected using a 64-bit memory interface. The GPU is operating at a frequency of 75 MHz, memory is running at 75 MHz.
Being a single-slot card, its power draw is not exactly known. Display outputs include: 1x VGA. 3D Rage PRO AGP is connected to the rest of the system using an AGP 2x interface.

Graphics Processor

GPU Name: 3D Rage Pro
GPU Variant: 3D Rage PRO AGP
Process Size: 350 nm
Transistors: 8 million
Die Size: 80 mm²

Graphics Card

Released: Mar 1st, 1997
Production Status: End-of-life
Bus Interface: AGP 2x

Clock Speeds

GPU Clock: 75 MHz
Memory Clock: 75 MHz
75 MHz effective

Memory

Memory Size: 2 MB
Memory Type: SDR
Memory Bus: 64 bit
Bandwidth: 600 MB/s

Render Config

Pixel Shaders: 1
Vertex Shaders: 0
TMUs: 1
ROPs: 1
Pixel Rate: 75.0 MPixel/s
Texture Rate: 75.0 MTexel/s

Board Design

Slot Width: Single-slot
TDP: unknown
Outputs: 1x VGA
Board Number: 462

Graphics Features

DirectX: 6.0
OpenGL: 1.1
OpenCL: None
Pixel Shader: N/A
Vertex Shader: N/A

VGA BIOS

Find graphics card BIOS for this card.

GPU-Z Validation

Find GPU-Z validations for this card.