An addition to ARCTIC's extensive range of fans: The P14 Max complements the existing high-performance series with a high-performance 140 mm model. The P14 Max impresses above all with its extremely wide speed range, which extends from a minimum of 400 to a maximum of 2800 rpm. It's equipped with a Fluid Dynamic Bearing, allowing for near-silent operation at low speeds, while at the same time guaranteeing brutal performance when it's needed.

As ARCTIC's most powerful 140 mm fan, it provides a significant leap in performance over existing air- and water-cooling solutions. Like the P-Max models already introduced, the high-speed fan is also characterized by proven features such as the closed ring fan wheel for low-vibration rotation and a focused airflow at high static pressure.

CORSAIR today launched a white color variant of the revolutionary RMx SHIFT Series of ATX 3.0 power supplies. RMx SHIFT, the world's first PSU with the DC connector panel on the side of the unit, quickly became a sensation among DIY PC enthusiasts after its launch last year thanks to cleaner and easier cabling than traditional power supplies. Available in 750, 850, 1000, and 1200 wattages, the RMx SHIFT Series exemplifies CORSAIR's commitment to addressing the evolving needs of its customers. With its repositioned side panel, builders have unobstructed access to all of its Type 5 Gen 1 micro-fit connections, making installation and maintenance painless. It also means less bending and twisting of the cables, removing unnecessary strain on the cables and connectors.

White models of RMx SHIFT address the overwhelming demand from the PC building community for more customization options to match a wider range of builds. The new white units retain all the features that have made the RMx SHIFT a market standout, including fully modular cabling, 80 Plus Gold-rated efficiency, premium 105°C-rated Japanese capacitors, and a 140 mm fluid dynamic bearing fan, while matching the clean aesthetic of white system builds.

ASUS today announced the TUF Gaming GT302 ARGB chassis, a case that makes it easy to build a high-performance PC with great cooling. Prepped and ready for great out-of-the-box cooling, equipped for wide compatibility with high-performance parts, and thoughtfully constructed inside and out for an easy PC DIY experience, the GT302 ARGB resets expectations for a mainstream case.

Great cooling - right out of the box
Most PC builders go big on cooling to ensure an excellent balance of performance and quiet operation. From the moment it is pulled out of the packaging, the TUF Gaming GT302 ARGB gives users a superb foundation for high-end cooling. This starts with a front panel designed first and foremost to maximize airflow efficiency. It is constructed of a wide-open, high-porosity square-type mesh that leaves ample room for fresh air to enter a PC. Four pre-installed 140 mm ARGB case fans move cool air through the chassis. These fans are exceptionally thick, measuring 28 mm in depth. These fans deliver up to 3 mmH2O static pressure and 115 CFM airflow for excellent cooling with quiet operation.

Thermaltake, a leading PC DIY brand for premium hardware solutions, is proud to announce that the TOUGHFAN EX12/14 Pro High Static Pressure PC Cooling Fan - Swappable Edition (3-Fan Pack) is now available for purchase worldwide. Elevate non-RGB fans to new heights; the TOUGHFAN EX Pro merges the exceptional cooling capability of the TOUGHFAN Pro with the quick magnetic connection and swappable fan blade design of the SWAFAN EX. Providing a cooling system with high performance, aesthetic appeal, and installation flexibility.

The TOUGHFAN EX12/14 Pro features a new MagForce 2.0 Quick Connect Design which the upgraded pogo pin contact pads are two times larger to minimize potential misalignment. With this innovative technology, you can install fans effortlessly with magnetic force and decrease cable usage. Equipped with a swappable fan blade design, the TOUGHFAN EX Pro can be switched between standard and reverse fan blades. Therefore, you can always present the front of the fans in any airflow direction, enabling maximum flexibility and aesthetics. Additionally, the fan blades can be easily popped out for rinse, making maintenance simple and fun.

LIAN LI Industrial Co. Ltd., a leading chassis and PC accessories manufacturer, premieres the LIAN LI 2024 DIGITAL EXPO at 9 am EST on YouTube. In this 2-part video, LIAN LI shares updates on prototype cases, a standing desk, and unveils new concepts for an all-in-one cooler and power supply. The prototypes include the SUP-01, the case that experiments with a front GPU layout, the DAN Cases A3 M-ATX case, and the O11 VISION BACK CONNECT. LIAN LI also unveils the GALAHAD II LCD SHIFT, an AIO that minimizes the tubing, the EDGE Series PSU, a new form factor power supply that solves cable access in dual chamber cases, and the DK-07, a new standing desk with new features. The LIAN LI 2024 DIGITAL EXPO will be followed by a roundtable discussion hosted by Jameson Chen, CEO at LIAN LI, with YouTube influencers Stuart Tonks from GGF Events, Justin Robey from Robytech, and PCMR's founder Pedro Valadas.

The SUP-01, a compact 45-liter case, reimagines the PC layout with a front-positioned graphics card and innovative cooling. Equipped with airflow-optimized mesh panels, it surpasses the LANCOOL 216 in cooling performance. The GPU's unique placement optimizes cooling without sacrificing aesthetics and is supported by adjustable brackets. The airflow configuration strategically utilizes GPU fans and rear fans as intakes, and right-side fans as exhausts, ensuring optimal GPU and CPU cooling. The main chamber accommodates motherboard sizes up to ATX, pre-mounted PCIe 4.0 riser cable, and features clearance for 280 to 360 mm AIOs. Storage options include two SSDs or 3.5" HDDs, a removable drive cage, and magnetic dust filters to maintain system cleanliness. The price is set to be $149.99.

SilverStone today introduced its premium air based CPU cooler, the Hydrogon D140 ARGB (model: SST-HYD140-ARGB). As its name might suggest, this is a D-type (dual fin-stack) cooler that uses fans as large as 140 mm for ventilation, and hence fits into the large+heavyweight category of air coolers, targeting the segment of the market that really wants to avoid AIO coolers. The cooler uses a mirror-finish nickel-plated copper base, through which six 6 mm-thick heatpipes pass, which skewer the two fin-stacks on either of their ends. The two fin-stacks are capped off by a top-plate.

There are two fans involved in ventilating the heatsink, meant to be installed in a push-pull configuration. The "push" fan is a 120 mm, while the "pull" fan, located between the two fin-stacks, is a larger 140 mm spinner. Both fans come with addressable RGB LED illumination, and feature hydraulic bearings. The 120 mm fan turns at speeds ranging between 500 to 2,200 RPM, pushing up to 83.68 CFM of airflow at up to 4.01 mm H₂O static pressure, and up to 35.5 dBA of noise. The 140 mm fan, on the other hand, turns between 400 to 1,750 RPM, pushing up to 93 CFM of airflow at 2.24 mm H₂O static pressure, and up to 30.8 dBA of noise. With its fans in place, the cooler measures 140 mm x 160 mm x 136 mm (WxHxD), weighing 1.22 kg. Among the CPU socket types supported are LGA1700, AM5, LGA1200, AM4, and LGA2066. The company didn't reveal pricing.

be quiet!, the German manufacturer for premium PC components, announces a new color version for its mainstream fan series: Pure Wings 3 White. With a low minimum rpm and high top-end speed, Pure Wings 3 White is the perfect PC fan for any application, whether it is a demanding workstation or an entry level gaming build. Thanks to an optimized fan frame, it delivers outstanding performance on radiators while the newly designed fan blades and re-arranged angle result in extraordinary air pressure.

Compared to Pure Wings 3 in black, the new Pure Wings 3 White will omit the 3-pin models and therefore only come in four versions: 120 mm PWM, 120 mm PWM high-speed, 140 mm PWM, and 140 mm PWM high-speed. The color scheme of the fan sticker has been changed to grey-on-white to better suit the overall aesthetics. All Pure Wings 3 White high-speed models include an innovative closed loop motor to keep the rpm stable no matter the resistance. The result is a fan series that offers outstanding reliability and makes for a long-lasting companion for your gaming system.

CORSAIR at the 2024 International CES unveiled three new air cooling products; the A115 air CPU cooler, the AF120 MAX fans, and the RX Series Fans. We begin our tour with the AF120 MAX. These 120 mm fans come with a thickness of 30 mm, above the 25 mm industry standard. This 5 mm increase allows for a significantly bigger impeller, which results in a static pressure of 4.14 mm H₂O at its top speed of 2,000 RPM. The company hasn't disclosed its airflow and noise numbers, yet. It is also planning such thick fans in the 140 mm size. The fan is recommended for applications such as liquid cooling radiators, where the high static pressure comes handy. Next up, is the RX Series, a set of mid-range fans that come in RGB and non-RGB variants, and in sizes of 120 mm and 140 mm. The RGB ones support iCUE Link.

The star attraction is the new A115 air CPU cooler. This is a high-end D-type (dual fin-stack) CPU cooler, which uses six 6 mm-thick copper heatpipes that make indirect contact with the CPU through a copper base; 90 nickel-plated fins, a pair of included AF140 Elite PWM 140 mm fans; and an innovative new fan-installation mechanism that puts the two fans on rails, and has them slide into place from the top, with the heatsink installed, so you don't wrestle with clips and get cut. This sliding mechanism also ensures clearance for memory near the first "push" fan. The company's "Hold Fast" retention module is designed for easy installation of the heatsink; among the CPU socket types supported are LGA1700 (and by extension the upcoming LGA1851), AM5, and AM4.

At CES 2024 in Las Vegas, case maker InWin displayed several innovative new models for custom PC builds. The company continues its reputation for eye-catching designs with the debut of the adjustable flatpack POC One case and highly modular Mini Mod-II and Mod-III chassis. The POC One features interlocking panels for easy snap-together assembly, an advancement over the original April-launched POC line. It includes repositionable top or side handles for portable or horizontal setups. Using a mix of aluminium, other metals, and acrylic, the POC One initially comes in black/orange or blue/silver styles. Despite its minimalist flatpack form, it fits full-size components like 335 mm long triple-slot GPUs, 140 mm tall CPU coolers, and standard ATX power supplies. Three PCIe slots and an included riser allow vertical graphics card mounting.

DeepCool has unveiled a brand new cooling fan series at CES 2024—an intriguing selection of models include the high-performance FT12 and FT14 offerings. The company's engineers have designed these to be low-noise cooling solutions with excellent durability credentials. Their latest 120 mm and 140 mm models feature powerful 3-phase, 10-pole, 12-slot FOC closed-loop control motors with MQ magnets, and true high-grade fluid dynamic bearings. DeepCool is keen to highlight impressive specifications—namely (up to) 80,000 operating hours and a 5-year long limited warranty period.

The FT12's airflow performance is rated at a maximum of 79 CFM. According to the specification sheet on display at CES, the FT12 has static pressure rated at 4.2 mm/H20, while its noise level has been measured at around 29.9 dB(A). The F14's airflow also sits at 79 CFM, static pressure is 3.6 mm/H20 and noise level is similarly around the 29.9 dB(A) mark. DeepCool summarizes that the standard-sized FT fans are powerful, quiet and durable. Black or white color options were on display at the company's booth.

Thermaltake, a leading PC DIY brand for premium hardware solutions, is thrilled to announce the CTE E600 MX E-ATX Mid-tower PC Chassis today, and now showcased at the CES 2024 in Las Vegas. This cutting-edge Mid-tower chassis marks a significant addition to the award-winning CTE series. The CTE E600 MX inherits Thermaltake's innovative CTE (Centralized Thermal Efficiency) Form Factor as a dual-chamber mid-tower case. This design concept strongly emphasizes delivering high-level thermal performance to critical chassis components. The CTE E600 MX has a revolutionary 3-way GPU installation option and an interchangeable dual-front panel design for optimal flexibility and PC gaming build customization. It is now available in black, snow, and hydrangea blue editions.

"The CTE series PC case represents a significant leap in innovation, having been prominently featured at the last CES. Our latest addition, the CTE E600 MX, is remarkable. Our product design team closely studied feedback from gaming communities, particularly from hardcore gamers. They strongly preferred a PC case offering extensive installation options for critical gaming components, such as graphic cards. By balancing functionality with aesthetics, we ensured that the CTE E600 MX didn't compromise chassis ventilation while maintaining a sleek and appealing look," stated Michael Guo, the vice president of Thermaltake USA.

ENERMAX, an industry-leading force dedicated to designing high-performance computer hardware and cooling solutions, today announced the new StarryKnight SK30 (SK30 V2) mid-tower PC case, a follow-up and upgrade of its last-generation SK30 PC case.

The SK30 V2 comes with three pre-installed 140 mm and one 120 mm ENERMAX SquA RGB ADV fans with PWM function. The SquA RGB ADV fan, as one of ENERMAX's most powerful ARGB fans, delivers 40% stronger airflow than other regular-case fans with an enlarged blade surface. The combination of air-inlet and vortex-frame design will not only bring in more air but also direct and concentrate airflow across the system's components.

EK, the EU-based premium water cooling gear manufacturer, is introducing new L-shaped brackets for all current FLT series products. The EK-Loop Angled Bracket enables users to mount the FLT-style combo units or reservoirs to any 120 mm fan mounting holes in a perpendicular manner. This will allow more airflow to freely pass through the case and offer new mounting options that would otherwise be unsupported by the case itself.

EK-Loop Angled Brackets
The EK-Loop Angled Brackets can be mounted to 120 mm (105 mm hole spacing) or 140 mm (125 mm hole spacing) fan mounting holes. The bracket allows you to mount the FLT series products to your case, fans, or radiators in a perpendicular (at a 90-degree angle) alignment. Additionally, you can use the long or the short side of your FLT product for additional mounting options by rotating the product that is being mounted.

Phanteks expands the D30 fan lineup with the bigger, 140 mm, D30-140 fans. These new 140 mm offerings represent the pinnacle of performance, aesthetics, and innovation, catering to the needs of both PC enthusiasts and builders.

D30-140 Fans: Redefining Performance and Aesthetics
The D30 fans introduce a mesmerizing integration of D-RGB lighting that spans seamlessly across the frame and blades of the fan from all sides. A hallmark of the D30 fan is its unique capability for easy and clean fan linking. Phanteks has designed bridge connectors and screw cover plates, enabling multiple D30 fans to be seamlessly interconnected. This innovative solution reduces cable clutter and transforms multiple fans into a unified, visually striking unit, resulting in an immaculately clean build.

Thermaltake, the leading PC DIY premium brand for Case, Power, Cooling, Gaming peripherals, and enthusiast Memory solutions, is delighted to launch the Ceres 300 TG ARGB Matcha Green Mid Tower Chassis and the ARGENT E700 Real Leather Gaming Chair Matcha Green. After first releasing The Tower 200 Matcha Green Mini Chassis and gaining positive reviews, Thermaltake plans to announce more products in Matcha Green, allowing users to immerse this vital and elegant color with a complete lineup. Now including the worldwide availability of the Ceres 300 Matcha Green and the ARGENT E700 Matcha Green. More good news, the TH280 V2 ARGB Sync All-In-One Liquid Cooler - Matcha Green Edition is coming soon. Let's light up entertainment and work spaces with these stylish Matcha Green collections!

In Win Development Inc. (InWin), a leading innovator in PC enthusiast gaming hardware, has introduced its new AN120/140, DN120/140, and DN120/140 PRO case fans. These silent, high static pressure fans are ideal for air or liquid cooling.

Key Features
Neptune AN, DN, and DN PRO fans feature InWin's signature Turbine Blade design that angles the blades to channel more concentrated airflow. The fan is molded to the frame to prevent air leakage and noise pollution that standard models tend to emit. The results offer an impressive static pressure of up to 2.95 mm/H2O (DN140 PRO), while operating at a mere 20.3 dBA (DN120 PRO). Get great performance without sacrificing your peace. Control with PWM via a dedicated IC chip (for DN PRO), which can produce as little as 17.2 dBA at 900 RPM (AN120).

DeepCool, a leading manufacturer of PC cooling solutions, cases and components, is proud to unveil the CH560 and CH560 DIGITAL, the latest additions to their lineup of high-performance PC cases. Designed with a keen focus on airflow, these cases are perfect for modern power-hungry systems that require efficient cooling for optimal performance.

The DeepCool CH560 DIGITAL is a digital temperature gauge version that caters to users with high-end systems who demand the utmost airflow. With CPUs and GPUs reaching new levels of power consumption, closed-off cases are no longer sufficient. Taking cooling to the next level, The CH560 DIGITAL features dual status screens that provide vital CPU and GPU information at a quick glance, freeing up precious desktop screen space. Users can choose between CPU and GPU temperatures, utilization, or both, with the screens switching between temperature and utilization in 5-second intervals. The integrated double-status digital screen is controlled by a simple-to-use application, giving users full control of the display statuses.

Jonsbo, a Chinese case manufacturer known for unique case designs, has introduced the new Jonsbo C6 and N2 cases to its offerings. The C6 is a compact and versatile Micro-ATX case designed to appeal to many users, including gamers. It offers ample space for up to three 120 mm fans, ensuring efficient air cooling within the case. The front of the C6 can accommodate two 140 mm fans, further enhancing airflow. To promote optimal ventilation, the front, side panels, and lid of the C6 are made of air-permeable mesh. Regarding hardware compatibility, the C6 can house graphics cards with a maximum length of 255 mm and CPU coolers with a height of up to 75 mm. Additionally, it provides the flexibility to install an HDD or two SSDs in the front without a 120 mm fan. The Jonsbo C6 is available in black and white color options, catering to different aesthetic preferences.

Kolink has brought back one of their fan-favourite PC cases, this time with fancy improvements. Meet the Kolink Inspire K2 Plus! Whilst many features remain the same - if it ain't broke, don't fix it, amiright? - there are a number of ease-of-use upgrades integrated within the design. Plus, an aesthetic glow-up. We all love a glow-up. If your Micro-ATX case is looking a bit shabby or you're itching to start a new build, stick around and see how this classic Kolink chassis has been improved. There may even be some surprise cables, too!

What's New
The Kolink Inspire K2 Plus builds on the much-loved design of its predecessor. There are subtle and more obvious changes that have been made to the chassis. The internals have been improved to facilitate better component support. Enjoy superior accommodation for your high-end hardware and integrated radiator mounts. New features have even been added. Unlike the original K2, this version sports a dedicated PSU chamber to help maintain temperatures and keep the interior looking clutter-free.

be quiet!, a German company focusing on creating PC components and accessories, had a strong presence at Computex 2023. Showing off its cases and power supplies, the company introduced a few additions to its portfolio of offerings. For starters, be quiet! has introduced a new case series called Shadow Base. The new Shadow Base lineup is focused on maximum airflow and maximum performance, where the company has made a new open mesh design that allows for "exceptionally high airflow." Inaugurating model of the series is the Shadow Base 800, which comes in three flavors: standard, DX, and FX. The standard edition is just a regular case without flashy RGB; the DX model has an RGB strip, while the FX model is tailored for maximum RGB illumination across the case. With up to E-ATX motherboard support, the case supports three or four 140 mm fans, depending on the variant. You can see the specification sheet below.

Power supply OEM giant Super Flower is making a comeback to the DIY retail channel with its latest Leadex VII series premium full-modular power supplies. These meet ATX 3.0 and PCIe Gen 5 specs, There are two sub-series, the Leadex VII XP and the Leadex VII XG (which meet 80 Plus Platinum and 80 Plus Gold efficiency standards, respectively). The XG series additionally boasts of Cybenetics Platinum switching efficiency. Both feature 15 cm body lengths, and use 140 mm FDB fans. Both come in 850 W and 1000 W models, and while the XP series tops out at 1200 W, the highest XG series model is 1300 W. Both feature Super Flower's signature straight universal modular connectors. The square ones take in any of the three pure-12 V connectors, including 16-pin 12VHPWR, 6+2 pin PCIe power, and 4+4 pin EPS.

We also caught a handful of SFX and SFX-L high-wattage PSUs in the Super Flower booth. The SF-1000F14SP is an SFX-L PSU that can put out 1000 W, and features universal connectors, as well as 16-pin 12VHPWR. A 120 mm FDB fan keeps it cool. The SF-750F12PX is a traditional SFX modular PSU with 750 W on tap, 80 Plus Platinum switching, one 600 W-capable 12VHPWR connector, and a 92 mm FDB cooling fan. Lastly, we spied the high-end Leadex 1600F14XP. the company's flagship in the booth. This one comes in a long 18 cm body and uses a 140 mm FDB fan to keep cool. It meets ATX 3.0 and PCIe Gen 5 specs, and offers two 600 W 12VHPWR using its universal 12 V connectors. You get 80 Plus Platinum switching efficiency.

Here are some of the first pictures of Noctua's next-generation NH-D15 CPU cooler. One of the pioneers of this design, the D-15 in its 2024-bound avatar comes with a complete design overhaul, including its two large fin-stacks, that are designed not to impede components around the CPU socket, such as elaborate VRM and SSD heatsinks, rear I/O shrouds, and of course memory. The fin-stacks are denser, with a reduced gap between fins of 1.6 mm (compared to 1.9 mm of the original NH-D15), which translates to 20% more surface area for heat dissipation.

The surface for contact remains nickel-plated copper, but Noctua is using eight 6 mm-thick heatpipes, compared to six on the previous generation. The heatpipes make contact with practically the entire base plate, so this cooler should be suitable for even chiplet-based processors. Ventilation is care of two included "next-gen" 140 mm fans that offer superior performance and noise characteristics compared to anything in Noctua's lineup right now. The cooler uses Noctua's SecuFirm 2+ retention module using spring-loaded screws to mitigate excessive mounting pressure that can bend motherboard PCB. Noctua will include a tube of the company's latest NT-H2 thermal paste (9 W/mK), and NA-TPG1 thermal paste spill guard. The company plans to launch this cooler some time in Q2-2024.

A new series of ENDORFY Arx 700 Air and Arx 700 ARGB PC cases has just been released, developed for gamers, creators, and technology enthusiasts who are looking for maximum cooling potential and convenient access to all internal components. These are the largest cases to date in ENDORFY's portfolio, able to accommodate, among other things, a tall cooling system, 8 fans, and virtually any graphics card currently available on the market.

The ENDORFY Arx 700 is designed to provide the best possible airflow, while ensuring easy and convenient installation and the maximum possible compatibility with air- and water-cooling systems or the latest, large-sized graphics cards. Arx 700 provides maximum cooling potential, wide possibilities of computer configuration, and freedom in the choice of components used.

2023. There are three cases that Lian Li is presenting: O11D EVO XL, O11D EVO RGB, O11 Vision, and SUP 01. Starting off with the O11D EVO XL, it is a versatile e-ATX case designed to house cutting-edge hardware, with the added flexibility of being set up in a reverse configuration. This case allows for placing a GPU next to the motherboard, either upright or flipped, in either standard or reverse setups. It is also equipped with an adaptable I/O module that can be mounted at various points for optimal user-friendliness. Furthermore, the O11D XL comes with a detachable support column on the front left, providing unimpeded visual access to the case's interior. It also boasts a motherboard tray that can be adjusted in height for three different cooling arrangements, even accommodating up to three 420 radiators simultaneously.

EK, the leading manufacturer of premium water-cooling equipment, is delighted to introduce their latest creation, the EK-Quantum Reflection² ROG Hyperion D5 PWM D-RGB - Plexi distribution plate, specially designed for the new ASUS ROG Hyperion GR701 chassis. This cutting-edge distribution plate incorporates state-of-the-art water-cooling technology, featuring the latest 3rd generation SATA-powered D5 pump, eliminating the need for additional 4-pin Molex cables. Being EK-Matrix7 compatible, the Reflection² series distribution plates ensure seamless compatibility, effortless integration, and unrivaled aesthetics.

Exquisite Craftsmanship and Stunning Visuals
With its sleek design and transparent plexiglass construction, the EK-Quantum Reflection² ROG Hyperion D5 PWM D-RGB - Plexi offers an all-in-one custom water-cooling solution that combines a reservoir, routing system, and a pump. Meticulously crafted using advanced CNC machining techniques and with the use of high-quality acrylic material, you know this distro is made with impeccable accuracy and an immaculate finish, showcasing outstanding water-cooling capabilities, unmatched craftsmanship, and great attention to detail.