News Posts matching "EK Water Block"

Return to Keyword Browsing

EK Releasing New Hard Tubing Series Kits

EK Water Blocks, the premium liquid cooling gear manufacturer, is introducing its newest line of popular EK Kits, the Hard Tubing kits. These kits are a great choice for enthusiasts who are looking for a complete high-performance hard tubing liquid cooling solution. EK-KIT HT240 and EK-KIT HT360 beside the super compatible thin EK-CoolStream SE radiator that they use will also be very suitable for low noise scenarios. As we know, slim radiators benefit from low-speed fans more than the thick ones, and the 120 mm fan format only adds additional cooling surface.

The EK-KIT HT240 is a complete hard tubing liquid cooling kit dedicated to users who seek top performing market proven components with versatile case compatibility in focus. Designed for cases with limited radiator space in mind, the HT kit is a great choice for liquid cooling enthusiasts who are looking for a complete high-performance hard tubing cooling solution. This kit brings everything you need to assemble your custom liquid cooling loop. You don't have to worry about compatibility issues or matching the fitting and tubing size. If you are looking for a quick access to the world of premium liquid cooling, this is your entry ticket. The end result is a beautiful looking hard tubing liquid cooling loop that is also ready for a future upgrade.

EK Launches Updated EVGA GTX 1080 Ti FTW3 Water Block

EK Water Blocks, the leading premium liquid cooling manufacturer, is further expanding its RGB portfolio by releasing the EK-FC1080 GTX Ti FTW3 RGB water block that is compatible with EVGA GeForce GTX 1080 Ti FTW3 based graphics cards. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks.

This water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under full load and high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

EK Releases Updated ASUS ROG Strix GTX 1080 Ti Water Block

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer, is further expanding its RGB portfolio by releasing the EK-FC1080 GTX Ti Strix RGB water block that is compatible with all the current ASUS ROG Strix GeForce GTX 1080 Ti models on the market. A while back, the GPU manufacturer had slight changes to the GPU PCB and now this full cover water block is compatible with all the PCB versions that are on the market.

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under full load and high overclocks. EK-FC1080 GTX Ti Strix RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

EK Announces Two RGB Versions of the EK-Supremacy EVO CPU Water Block

From the time it was first introduced in 2014, nothing has changed about the design of the EK-Supremacy EVO CPU water block. The block became a timeless piece that is recognized both for its distinctive looks and performance. While its performance is still not endangered, it kind of needed a small facelift. By popular demand of the market, EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is releasing two new RGB versions of the EK-Supremacy EVO CPU water block.

EK-Supremacy EVO RGB: This is a high-end, highly adaptable CPU water block, just as all the other EK-Supremacy EVO models so far. By combining jet plates and jet inserts, the cooling engine enables the water block to be fine-tuned for all mainstream Intel and AMD sockets for maximum performance. A high-flow design with low hydraulic restriction also allows this product to be used in setups using weaker water pumps or lower pump speed for added silent operation.

EK Releases Full-coverage Water Block for ASUS ROG Strix RX Vega Series

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer, is releasing EK-FC Radeon Vega Strix water blocks that are compatible with the ASUS ROG Strix RX VEGA64. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks.

This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Radeon Vega Strix water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

EK Water Blocks K-XTOP Revo D5 Pump Now Available

EK Water Blocks, the world-renowned premium liquid cooling manufacturer, is releasing the EK-XTOP Revo D5 RGB PWM pump unit and a stand-alone EK-XTOP Revo D5 RGB top to upgrade your existing trusty D5 pump. Meaning, the very popular and successful EK-XTOP Revo D5 PWM pump is now available with an integrated 4-pin 12V RGB LED strip and dense high-quality PET black sleeving on both the PWM and power cables as well.

Both products are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip.

EK Unveils NVIDIA TITAN V Full-coverage Water-block

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer, is releasing water blocks for the most powerful PC GPU on the market to this day, the NVIDIA Titan V. The EK-FC Titan V full cover GPU water block will help you enjoy the full computing power of the Volta architecture based NVIDIA Titan V in a silent environment.

This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as well! Water is channeled directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks and to reach full boost clocks. EK-FC Titan V water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

EK Announces Monoblock for GIGABYTE X399 Motherboards

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is releasing a new Socket TR4 based monoblock made for several GIGABYTE X399 motherboards. The EK-FB GA X399 GAMING RGB Monoblock has an integrated 3-pin RGB Digital LED strip which makes it compatible with GIGABYTE Fusion, thus offering a full lighting customization experience.

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for two GIGABYTE AMD X399 Chipset based motherboards that support AMD Socket TR4 AMD Ryzen Threadripper processors. This monoblock is compatible with the following GIGABYTE motherboards:
  • GIGABYTE X399 Aorus Gaming 7 (rev.1.0)
  • GIGABYTE X399 Designare EX (rev.1.0)

EK Water Blocks Announces Fluid Gaming A240R Kit

The EK Fluid Gaming lineup is finally supporting AMD Radeon RX Vega based graphics cards! EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is releasing a new kit, the A240R and the EK-AC Radeon Vega aluminum based full cover water block! The EK-AC Radeon Vega full cover water block brings a pure and minimalistic design for liquid cooling enthusiasts and the same can be said for the EK Fluid Gaming A240R kit. The kit is equipped with an EK-Supremacy AX CPU water block, an evolution of the renowned high-end EKWB water block that brings excellent performance and an attractive appearance! It's a universal water block that suits all modern CPU sockets on the market, both Intel and AMD.

The included EK-AluStream SE radiator offer high-class cooling performance for its thickness of 28mm. Dense aluminum fins combined with a slim profile provide a huge cooling surface, while the radiator remains highly compatible with most cases on the market. AluStream SE radiators are optimized for maximum heat dissipation across the entire operational range of the included high-static pressure EK-Vardar fans which deliver exceptional performance at both low and high RPM operation.

EK is Releasing More Color Options for M.2 NVMe SSD Heatsinks

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer, is releasing new passive heatsinks for M.2 NVMe Next Generation Form Factor SSDs in multiple color options! The popularity of the existing Black and Nickel plated M.2 NVMe heatsinks clearly indicated the need for more color options, so here they are! It is not a secret that M.2 NVMe SSDs can overheat very easily and be affected by thermal throttling, thus losing performance. The EK-M.2 NVMe Heatsink can lower the SSDs operating temperature by 7 to 30°C.

The design of the heatsink ensures that it is easy to install, it is low profile, easily reusable and aesthetically non-intrusive. Simple clips ensure that the heatsink is very easy to install and to re-use if the SSD is upgraded. The ribbed surface of the heatsink acts as a very effective passive cooler, as well as aesthetic cover. Its simple design ensures a sleek, non-intrusive look that can be easily combined with any aesthetical requirement of the user. The compact design makes it highly compatible so that it does not interfere with other components. EK Water Blocks are offering the new EK-M.2 NVMe Heatsink in red, blue, green and purple variants. The gold variant will be available within two weeks of time.

EK Water Blocks Announces Availability of the EK-MLC Phoenix

EK-MLC Phoenix is a Modular Liquid Cooling line of products and the next generation of improved All-In-One water cooling solutions. It is a new lineup of pre-filled products for liquid cooling, the 2nd generation of improved EK All-In-One products. Created for the market segment of customers who are unwilling to assemble a full custom loop or don't have enough time for maintenance of their PCs, but still insist on a high-end cooling solution. The most important feature of EK-MLC is the modular design and the ability to add multiple pre-filled water blocks in any order.

Modular Liquid Cooling line of products is designed around Quick Disconnect Couplings and it brings a modular approach to connecting and expanding the loop, giving you the freedom to decide which components you want to cool down. CPU cooling module and GPU cooling module can be connected to the radiator core module in any order, separately or together.

EK Launches Fitting Multipacks in Various Colors

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is launching four-piece and six-piece multipack options of the most popular fitting types and colors. These multipack options will simplify the process of choosing the number of fittings needed for a liquid cooling loop. Users can combine four and six-piece packs with each other to get the desired number of fittings needed. The boxed up fittings will also bring added safety during transport and the users will have a nice box to store their fittings in.

Both four and six-pack fittings come in four different color variations. Nickel, Black, Red, and White are chosen as the most popular colors that are being used. The EK-ACF Fitting (Advanced Compression Fitting) multipack is a soft-tube compression fitting pack, they are designed for use with flexible soft tubings such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. EK-ACF Fitting is a secure variant of the tubing fitting connector as the locking ring prevents flexible tube to be pulled out of the fitting by compressing the tubing wall underneath the ring. Such fitting does not require any hose clamp or similar substitute.

EK is Releasing a New Combo Unit and Two Reservoirs Fitted with RGB

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is going deeper into the field of RGB as one EK-XRES Revo combo unit and two EK-RES X3 reservoirs are hitting the shelves! All three new products are equipped with classic 4-pin RGB LED stripes making them compatible with every major motherboard manufacturer and mainstream RGB controller.

The EK-XRES 140 Revo D5 RGB PWM comes with a 140mm tall reservoir and has all of its pump cables sleeved. A high-performance aftermarket pump top (volute) is integrated with the reservoir for Xylem D5 series water pumps. This top offers increased hydraulic performance (up to 15%) compared to stock solutions.

EK Releases CPU+VRM Monoblock for ASUS X399 Threadripper Motherboards

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer proves its market leadership once again by releasing the world's first Socket TR4 based monoblock made for several ASUS X399 motherboards. The EK-FB ASUS ROG ZE RGB Monoblock has an integrated 4-pin Digital RGB LED strip which makes it compatible with ASUS Aura Sync, thus offering a full lighting customization experience.

Designed and engineered in cooperation with ASUS, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools AMD Socket TR4 type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Using such a monoblock gets rid of the small fan that can be found on some X399 motherboards, hidden under the I/O cover.

EK Water Blocks Releases two New Slim Series Kits

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is excited to announce the expansion of the S Kit lineup. Following the recent release of EK-CoolStream SE 140 and EK-CoolStream SE 280 slim radiators, two new kits will also be joining the webshop. Slim Series kits or in short S Kits are a great choice for beginners at liquid cooling and people doing builds with limited radiator space.

EK-KIT S140 and EK-KIT S280 beside the super compatible thin EK-CoolStream SE radiator that they use will also be very suitable for low noise scenarios. As we know, slim radiators benefit from low-speed fans more than the thick ones, and the 140mm fan format only adds additional cooling surface.

EK Releases CoolStream Slim 140mm and 280mm Radiators

EK Water Blocks, the market leader in high-end liquid cooling for PC products, is releasing two new slim radiators. EK-CoolStream SE 140 and EK-CoolStream SE 280 will fill the gap in our radiator lineup where high-performance and high-compatibility slim radiators are needed. With case manufacturers putting more and more emphasis on the 140mm fan form factor, these new CoolStream SE radiators will surely set an example in their category.

While most radiators on the market overhang on the side, and are actually bigger than the fans they use, these two new radiators are champions of compatibility in their class. Measuring exactly 140mm in width (the same as the classic 140mm fan) and being only 28mm thick, they will surely fit where some other radiators can't.

EK Water Blocks Releases X-series FC Terminals for Multiple GPU Connectivity

EK Water Blocks, a market leader in high-end liquid cooling for PC products, is releasing all new terminals for multiple Full-Cover GPU water blocks connectivity. The new design is even more minimalistic than the previous ones with the terminal itself having only an engraved EK logo on it. The X series terminals are redesigned in terms of connectivity and all the ports are flush with the body of the terminal - no more recessed ports which means no additional extender fittings required! Another key feature of the new terminals is their compatibility with the newly implemented aesthetic terminal covers on EK-FC series GPU water blocks.

The new X series terminals can do everything as the old ones, we have just redesigned some of the unnecessary quirks. The design is simplified so that each terminal has a minimalistic look with a small subtle engraved EK logo. The users can still choose either a Parallel or a Serial terminal (you can recognize Serial terminals by the "S" label) for connecting their EK Full-Cover GPU water blocks with the new Terminal X line-up. X-number labeling is intended to indicate the number of GPU water blocks that a certain terminal can connect. For example, EK-FC Terminal X2 S can connect two GPU water blocks and comes in Serial configuration.

EK Intros Monoblocks for ASUS ROG Rampage VI Extreme and Apex

A special motherboard requires a special water block, so the tradition with monoblocks for ASUS ROG RAMPAGE series motherboards continues. EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is releasing new LGA-2066 socket based monoblocks made to fit ASUS ROG RAMPAGE VI Extreme and Apex motherboards. The EK-FB ASUS ROG R6E RGB Monoblocks have integrated 4-pin RGB LED strips which make them compatible with ASUS Aura Sync, thus offering a full lighting customization experience.

EK Further Expands Its Fluid Gaming Portfolio

EK Water Blocks, the market leader in PC custom liquid cooling, is releasing additional aluminum water cooling parts for its new brand created for PC gamers called EK Fluid Gaming. Bringing the best price/performance ratio imaginable, EK Fluid Gaming is already becoming a number one choice for many gamers who want to join the ultimate liquid cooling club in the world!

EK Intros RGB Monoblock for ASUS ROG Strix X299-E Gaming

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer sets the bar even higher by releasing their second LGA-2066 socket based monoblock tailor made for the ASUS ROG Strix X299-E Gaming motherboard. The EK-FB ASUS Strix X299-E RGB Monoblock has an integrated 4-pin RGB LED strip which makes it compatible with ASUS Aura Sync, thus offering a full lighting customization experience. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for ASUS ROG Strix X299-E Gaming motherboard that supports new Intel Core X-series LGA2066 socket processors.

Designed and engineered in cooperation with ASUS, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools Intel LGA-2066 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-FB ASUS Strix X299-E RGB features high flow design and this monoblock can be easily used with weaker and silent water pump settings as well. This kind of efficient VRM cooling on an X299 platform additionally brings down the CPU temperatures compared to the traditional CPU water block and stock VRM heatsink cooling solution.

EK is Releasing Full Cover Water Blocks for AMD Radeon RX Vega

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer has proven its market leadership once again by presenting Full Cover water blocks for the long awaited AMD Radeon Vega architecture based high-end graphics cards. Customers will be able to transform their GPU into a stunningly beautiful single slot graphics card and the water cooling block will allow it to reach higher frequencies, thus providing more performance during gaming or other GPU intense tasks.

EK-FC Radeon Vega
This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Radeon Vega water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

EK Releases New Vardar EVO Fans with Start-Stop Function

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is releasing a new lineup of its renowned EK-Vardar fans. Developed in-house and first introduced in 2014, EK-Vardar fans have now evolved into new EK-Vardar EVO lineup. EK-Vardar EVO fans with Extended range (ER) of PWM operation feature a special Start-Stop function which brings a true 0dB experience for the absolute silent fan operation. The electronics of the new ER EVO fan has been specially tweaked so that the fan stops spinning if the PWM signal falls below a certain duty cycle value. Not only will you be able to enjoy a totally silent PC, but this feature is also very useful for preventing radiator dust buildup in idling PCs and prolongs the lifecycle of the fan itself.

EK Releases RGB Monoblocks for MSI X299 Gaming Pro Carbon

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer is maintaining its market leadership by releasing the world's first LGA-2066 socket based monoblock tailor made for MSI X299 motherboards. The EK-FB MSI X299 GAMING PRO CARBON RGB Monoblock has an integrated 4-pin RGB LED strip which makes it compatible with MSI Mystic Light, thus offering a full lighting customization experience.

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for three MSI Intel X299 Chipset based motherboards that support new Intel Core X-series LGA-2066 socket processors. This monoblock is compatible with the following MSI motherboards:
  • MSI X299 GAMING PRO CARBON AC
  • MSI X299 GAMING PRO CARBON
  • MSI X299 GAMING M7 ACK

EK Water Blocks Intros M.2 NGFF SSD Heatsink

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer, is releasing a passive heatsink for M.2 NVMe Next Generation Form Factor SSDs. Although it's not a water cooling part, it is a much needed aesthetical and functional heatsink for many PC owners. It is not a secret that M.2 NVMe SSDs can overheat very easily and be subdued to thermal throttling, thus losing performance. The heatsink brings 8-11°C improvement in SSDs temperatures, or even more with sufficient air flow.

The unique design of the heatsink ensures that it is easy to install, it is low profile, easily reusable and aesthetically not intrusive. Simple clips ensure that the heatsink is very easy to install and to re-use if the SSDs is upgraded. Ribbed heatsink acts as a very effective passive cooler as well as aesthetic cover. Its simple design ensures a sleek, non-intrusive look that can be easily combined with any aesthetical requirement of the user. The compact design makes it highly compatible so that it does not interfere with other components. EK Water Blocks are offering the new EK-M.2 NVMe Heatsink in black and nickel variants.

EK Water Blocks Expands Fluid Gaming Portfolio

EK Water Blocks, the market leader in PC custom liquid cooling, is announcing the first expansion of its new brand created for PC gamers called EK Fluid Gaming. Bringing the best price/performance ratio imaginable, EK Fluid Gaming is already becoming a number one choice for many gamers who want to join the ultimate liquid cooling club in the world.

Following the release of EK Fluid Gaming kits, many of you have asked us about the availability of separate aluminum parts. You can rest assured, we are officially announcing the first expansion of the EK Fluid Gaming lineup today! And more will follow in the near future.
Return to Keyword Browsing