Corsair Hydro Series H150i Pro 19

Corsair Hydro Series H150i Pro Review

A Closer Look »

Packaging


Corsair has put the Hydro Series H150i Pro into a large box that measures in at roughly 47.1 cm long, 18.4 cm wide, and 14.4 cm tall. On the front is a full image of the H150i Pro with the pump illuminated in blue by the RGB LEDs. A few features are also listed on the front, such as the zero RPM profile and Corsair Link support, just to name a few. The left side details the same features and again has an image of the cooler front and center. Taking a look at the back, you will find detailed specifications and the features of the H150i Pro mentioned.


On the right side is another image of the H150i Pro. Looking at the top, a quick summary of the unit's Corsair Link support is shown. Meanwhile, the bottom details socket support as well as what is in the box.

Contents


As is the tradition when opening the box for an all-in-one liquid cooler, we are greeted by the stereotypical cardboard tray that protects the cooler. A foam sheet is also present on top. As you may have noticed in these images, the box got a bit banged up during shipping. Thankfully, the product inside is unscathed. While I feel better packaging could be used here, the fact remains that the product is safe and sound, so I can't complain too much.


Everything needed for just about every modern socket is present, including AM4.

Common parts supplied for mounting include:
  • 24x M3 radiator screws
  • 24x Washers
  • 12x M3 short radiator screws
  • 4x Screw pillars
  • 4x Intel 2011 screw pillars
  • 4x Phillips head nuts
  • 3x 120 mm fans
  • 2x AMD screw clips
  • 1x User's manual
  • 1x AMD mounting bracket
  • 1x Intel mounting bracket
  • 1x Intel backplate
  • 1x Pre-filled liquid cooler
  • 1x Corsair Link cable
Next Page »A Closer Look