Enermax ETS-T40 Black Twister 0

Enermax ETS-T40 Black Twister Review

A Closer Look »

Packaging & Contents

The Enermax ETS-T40 Black Twister comes in a small but sturdy box. The box measures in at 21 cm in length, 17.8 cm in width, and 12.7 cm in height. The top of the box shows off the cooler and the fan with its LEDs while listing the 200W + TDP along with the AMD and Intel sockets that are supported. Enermax lists the cooler's features on the front, supplying images of all technologies to back them up. The left side again shows off the cooler and the fan and lists the contents inside the box

The main features are again listed - this time in many different languages - on the back of the box, and the right side lists the Enermax ETS-T40 Black Twister's the relevant specifications.


The packaging used by Enermax is above average. I am happy to see the sturdy cardboard box with cardboard inserts. This will keep the cooler from moving around, and it also provides a buffer should the box be dropped or dented. Overall, a big step up in terms of protection; that is, compared to some of the competition.

The ETS-T40 Black Twister comes with everything it needs to support all modern sockets, and its universal mounting design should make it be fairly easy to install. An extra set of fan clips have also been included for a dual-fan setup should users wish to further improve cooling performance. Enermax has provided everything except the kitchen sink and a second fan - just check the list below for yourself.
  • 8x Vibration-absorbing rubber pieces
  • 4x LGA 2011 screw pillars
  • 4x Screw pillars
  • 4x Backplate screws
  • 4x Red spacers
  • 4x Fan clips
  • 4x Bracket mount nuts
  • 2x AMD mounting arms
  • 2x Intel mounting arms
  • 2x Nuts for pressure-mounting plate
  • 1x Backplate
  • 1x Pressure-mounting plate
  • 1x 120 mm x 120 mm x 25 mm PWM fan
  • 1x Heatsink
  • 1x Packet of thermal compound
  • 1x Installation guide
  • 1x Wrench
Next Page »A Closer Look