Sapphire HD 7950 Vapor-X 3 GB 44

Sapphire HD 7950 Vapor-X 3 GB Review

Performance Summary »

Fan Noise

In past years, users would accept everything for a little bit more performance. Nowadays, users are more aware of the fan noise and the power consumption of their graphic cards.

In order to properly test the fan noise that a card emits, we use the Bruel & Kjaer 2236 sound level meter (~$4,000), which has the measurement range and accuracy we are looking for.

The tested graphics card was installed in a system that was completely passively cooled. That is, passive PSU, passive CPU cooler, passive cooling on the motherboard, and on a solid state drive.

This setup allows us to eliminate secondary noise sources and test only the video card. To be more compliant with standards like DIN 45635 (we are not claiming to be fully DIN 45635 certified), the measurement was conducted at 100 cm of distance and at 160 cm over the floor. The ambient background noise level in the room was well below 20 dBA for all measurements. Please note that the dBA scale is not linear but logarithmic. 40 dBA is not twice as loud as 20 dBA. A 3 dBA increase results in double the sound pressure. The human hearing perception is a bit different and it is generally accepted that a 10 dBA increase doubles the perceived sound level. The 3D load noise levels were tested with a stressful game, not with Furmark.

The Sapphire HD 7950 Vapor-X is reasonably quiet in both idle and load, much quieter than the AMD reference design. Temperatures are very low with below 70°C under load. There is some additional potential to quiet down the fan to match those super quiet custom GTX 670s.

Next Page »Performance Summary