Report an Error

Western Digital Black SN770 1 TB

1 TB
Capacity
WD 20-82-10081
Controller
TLC
Flash
PCIe 4.0 x4
Interface
M.2 2280
Form Factor
Package
Tweaktown
Package
PCB Front
Tom's Hardware
PCB Front
PCB Back
Tom's Hardware
PCB Back
Flash
Tom's Hardware
Flash
SSD Controller
Controller
The Western Digital Black SN770 is a solid-state drive in the M.2 2280 form factor, launched on February 2nd, 2022. It is available in capacities ranging from 250 GB to 2 TB. This page reports specifications for the 1 TB variant. With the rest of the system, the Western Digital Black SN770 interfaces using a PCI-Express 4.0 x4 connection. The SSD controller is the 20-82-10081-A1 Polaris MP16+ from WD, a DRAM cache is not available. Western Digital has installed 112-layer TLC NAND flash on the Black SN770, the flash chips are made by Toshiba. To improve write speeds, a pseudo-SLC cache is used, so bursts of incoming writes are absorbed more quickly. The cache is sized at 377 GB. Copying data out of the SLC cache (folding) completes at 560 MB/s. Thanks to support for the fast PCI-Express 4.0 interface, performance is excellent. The Black SN770 is rated for sequential read speeds of up to 5,150 MB/s and 4,900 MB/s write; random IO reaches 740K IOPS for read and 800K for writes.
At its launch, the SSD was priced at 129 USD. The warranty length is set to five years, which is an excellent warranty period. Western Digital guarantees an endurance rating of 600 TBW, a typical value for consumer SSDs.

Solid-State-Drive

Capacity: 1 TB (1000 GB)
Variants: 250 GB 500 GB 1 TB 2 TB
Overprovisioning: 92.7 GB / 10.0 %
Production: Active
Released: Feb 2nd, 2022
Price at Launch: 129 USD
Part Number: WDS100T3X0E
Market: Consumer

Physical

Form Factor: M.2 2280 (Single-Sided)
Interface: PCIe 4.0 x4
Protocol: NVMe 1.4
Power Draw: 1.0 W (Idle)
3.3 W (Avg)
4.6 W (Max)

Controller

Manufacturer: WD
Name: 20-82-10081-A1 Polaris MP16+
Architecture: ARM 32-bit Cortex-R
Foundry: TSMC FinFET
Process: 16 nm
Flash Channels: 4 @ 1,600 MT/s
Chip Enables: 4
Controller Features: HMB (enabled)

NAND Flash

Manufacturer: Toshiba
Name: BiCS5
Type: TLC
Technology: 112-layer
Speed: 1066 MT/s
Capacity: 1 chip @ 8 Tbit
Toggle: 4.0
Topology: Charge Trap
Dies per Chip: 16 dies @ 512 Gbit
Planes per Die: 2
Word Lines: 128 per NAND String
87.5% Vertical Efficiency
Read Time (tR): 56 µs
Program Time (tProg): 484 µs
Die Read Speed: 571 MB/s
Die Write Speed: 66 MB/s
Endurance:
(up to)
3000 P/E Cycles
(100000 in SLC Mode)
Page Size: 16 KB
Block Size: 1344 Pages
Plane Size: 448 Blocks

DRAM Cache

Type: None
Host-Memory-Buffer (HMB): 64 MB

Performance

Sequential Read: 5,150 MB/s
Sequential Write: 4,900 MB/s
Random Read: 740,000 IOPS
Random Write: 800,000 IOPS
Endurance: 600 TBW
Warranty: 5 Years
MTBF: 1.8 Million Hours
Drive Writes Per Day (DWPD): 0.3
SLC Write Cache: approx. 377 GB
(dynamic only)
Cache Folding Speed: 560 MB/s

Features

TRIM: Yes
SMART: Yes
Power Loss Protection: No
Encryption:
  • No
RGB Lighting: No
PS5 Compatible: Yes

Reviews

Same Drive

This section lists other SSDs in our database using the exact same hardware components

Notes

NAND Die:

Although this Die is a 4-plane design, most Kioxia BiCS5 NAND Dies used in most SSDs are dual planes design because of Yield and production cost.
And because of the die being dual-plane the Throughput is cut in half to 66 MB/s per die.
There is no CuA (Circuitry under Array) in the Dual-Plane variant.
Typical Endurance: 1700 P.E.C.
Rated Endurance: 5.000 (up to) P.E.C.

Apr 19th, 2024 20:48 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts