aquax
New Member
- Joined
- Aug 5, 2008
- Messages
- 141 (0.02/day)
System Name | aquax |
---|---|
Processor | i7 920 4GHz HT ON |
Motherboard | Gigabyte EX58-UD4P |
Cooling | TRUE120 |
Memory | 6GB TR3X6G1600C7 |
Video Card(s) | ASUS TOP HD4770 |
Storage | WD1001FALS / WD6400AAKS |
Display(s) | Samsung 2333SW soon |
Audio Device(s) | ALC889A |
Power Supply | Antec TPQ-850w |
Software | Vista Ultimate X64 |
I 'm stable with 3.82 [20x191], I wanted to try [19x200] but the PC doesn't boot, it makes continues long beep then revert back to default settings, max I can get to boot is 199BCLCK, what is holding me back?
I tried up to 1.397 QPI/VTT / 1.200 IOH, didn't try other voltage
Uncore is set to 16x / memory 8x
Update:
I can now boot at 200 bclk but I have to leave all the memory timmings and sub timmings at AUTO which gives 10-10-10-27 in CPU-Z, any attempt to change the timmings I can't boot.
Memory works fine @ 7-7-7-20 @ 1600MHz without OC
About the "Round Trip Latency" any attempt to change that will not let the PC to boot, it is currently set to:
Channel A "55" Auto
Channel B "57" Auto
Channel C "60" Auto
What does this latency do and why they are not same values?
i7 920 D0
Corsair 1600 6GB C7
EX58-UD4P
I tried up to 1.397 QPI/VTT / 1.200 IOH, didn't try other voltage
Uncore is set to 16x / memory 8x
Update:
I can now boot at 200 bclk but I have to leave all the memory timmings and sub timmings at AUTO which gives 10-10-10-27 in CPU-Z, any attempt to change the timmings I can't boot.
Memory works fine @ 7-7-7-20 @ 1600MHz without OC
About the "Round Trip Latency" any attempt to change that will not let the PC to boot, it is currently set to:
Channel A "55" Auto
Channel B "57" Auto
Channel C "60" Auto
What does this latency do and why they are not same values?
i7 920 D0
Corsair 1600 6GB C7
EX58-UD4P