X58-UD4P 200 BCLK doesn't boot

[Bo$$]

he quoted: Corsair 1600 6GB C7, so i assume it is

 

[Binge]

also those tRTLs aren't high at all. Look at yours please

 

[kid41212003]

those settings aside from the regular cas latencies should be set to auto until he knows what he's doing.

Yeah, i know, just wondering, it could cause problem if the kit not rated to use at 1.65v

I have high cas lag, but my tRC and tRFC is lower than that...

 

[Bo$$]

Yeah, i know, just wondering, it could cause problem if the kit not rated to use at 1.65v

they are as i previously posted

 

[Binge]

Yeah, i know, just wondering, it could cause problem if the kit not rated to use at 1.65v

I have high cas lag, but my tRC and tRFC is lower than that...

they are as i previously posted

we're waiting for the OP to actually change the values to 1.65v, but in all honesty he should turn off Turbo and make it Standard as well as put his ram to the correct voltage

 

[Tatty_Two]

ahhh right, he is using the 19x multi to get there, I use the 20x, so 190Bclk running my RAM at 1520mhz therefore at 8x on 7-6-6-18.

 

[Bo$$]

quick question what kind of perf gain are available from 1520mhz 7-6-6-18 and 7-7-7-20 @ 1600MHz

 

[Binge]

lower latency, so your computer would have a more "tight" feeling. You should mess with your own memory to get an idea of how tight timings affect your enjoyment. Really it's so minor of a difference you really have to be anal to notice.

 

[aquax]

I'm using "TR3X6G1600C7" and change the memory voltage doesn't have effect, I even tried 1.68v. My SPD for my memory is same settings detected by mobo, I checked with memset in windows and values are same

 

[aquax]

ahhh right, he is using the 19x multi to get there, I use the 20x, so 190Bclk running my RAM at 1520mhz therefore at 8x on 7-6-6-18.

I have no problem with 20x multi, can you try the 19x multi?

 

[aquax]

I was able to get system stable @ 4GHz using 191x21 (Turbo enabled / HT ON), it passed 25 passes LinX max stress with 5GB Free memory in Vista x64. I will just stick with that, it is still better than my previous hope [200x19 /Turbo disabled]

 

[Tatty_Two]

I was able to get system stable @ 4GHz using 191x21 (Turbo enabled / HT ON), it passed 25 passes LinX max stress with 5GB Free memory in Vista x64. I will just stick with that, it is still better than my previous hope [200x19 /Turbo disabled]

Nice, also remember, in most scenarios, 4gig with Turbo will be faster than 4gig without. I will try the 19x tonight when I am at home without Turbo just to see if I have the same issues. I think you will find that when BIOS F9 is released, most of your issues will go, there is much talk and testing going into this BIOS release and it should be out within a couple of weeks.