- Joined
- Jun 30, 2009
- Messages
- 314 (0.06/day)
- Heatware
- 119 0 0
System Name | βluė Ģraŋđēuŕ |
---|---|
Processor | Intel Core i5 2500K @ 4.6 GHz |
Motherboard | MSI P67A-GD55 (B3) |
Cooling | Thermalright Venomous X w/ 2x Scythe Gentle Typhoon AP-15's |
Memory | Mushkin Blackline 2x4 GB (8 GB) DDR3-1600 9-9-9-24-1T 1.35V |
Video Card(s) | MSI GTX 770 Lightning |
Storage | Samsung 840 Pro 128GB SSD + Western Digital WD6401AALS 640GB + 2x Samsung F4 HD204UI 2TB |
Display(s) | ASUS VE258Q 25" LED |
Case | Silverstone TJ04-E w/ Window |
Audio Device(s) | ASUS Xonar Essence STX |
Power Supply | Corsair HX750 |
Software | Windows 7 Professional x64 |
I accept PayPal only, shipping to US48 only.
My Heatware
Selling a 24-pin & 8-pin CPU EPS/ATX (motherboard) extension that I custom made. Priced at$75 $70 $60 $55 shipped for both
This isn't a service, these are extensions that are actually already made sitting on my desk.
Extensions were/are:
- Custom made using 18AWG thickly insulated copper wire
- All wires perfectly hand crimped
- Sleeved using black techflex clean cut 1/8"
- Sleeved using the heatshrinkless method, meaning no heatshrink is visible on wire, sleeving is melted to the crimp/pin to form an extremely tight bond that is almost impossible to break
- Extensions are "curved" to achieve a better look in the case, curve will look better depending on how tight you're bending it. This is achieved by using 11" cut wire on the outside, 10.5" cut wire on the inside (8-pin is curved for HORIZONTAL connections, not vertical)
- Tested to insure they function properly
Providing pictures of the actual product below, as well as the steps taken in making these exact extensions.
Pictures of items for sale:
24-pin extension
8-pin CPU EPS/ATX extension
Raw materials/how it was done:
My Heatware
Selling a 24-pin & 8-pin CPU EPS/ATX (motherboard) extension that I custom made. Priced at
This isn't a service, these are extensions that are actually already made sitting on my desk.
Extensions were/are:
- Custom made using 18AWG thickly insulated copper wire
- All wires perfectly hand crimped
- Sleeved using black techflex clean cut 1/8"
- Sleeved using the heatshrinkless method, meaning no heatshrink is visible on wire, sleeving is melted to the crimp/pin to form an extremely tight bond that is almost impossible to break
- Extensions are "curved" to achieve a better look in the case, curve will look better depending on how tight you're bending it. This is achieved by using 11" cut wire on the outside, 10.5" cut wire on the inside (8-pin is curved for HORIZONTAL connections, not vertical)
- Tested to insure they function properly
Providing pictures of the actual product below, as well as the steps taken in making these exact extensions.
Pictures of items for sale:
24-pin extension
8-pin CPU EPS/ATX extension
Raw materials/how it was done:
Last edited: