- Joined
- Oct 21, 2005
- Messages
- 6,880 (1.02/day)
- Location
- USA
System Name | Computer of Theseus |
---|---|
Processor | Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset) |
Motherboard | EVGA Z690 Classified |
Cooling | Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active |
Memory | G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK |
Video Card(s) | EVGA Geforce 3060 XC Black Gaming 12GB |
Storage | 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT |
Display(s) | Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms. |
Case | Lian Li O11 Air Mini |
Audio Device(s) | Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer |
Power Supply | Super Flower Leadex Platinum SE 1000W 80+ Platinum White |
Mouse | Zowie EC3-C |
Keyboard | Vortex Multix 87 Winter TKL (Gateron G Pro Yellow) |
Software | Win 10 LTSC 21H2 |
I made this really fast in sketchup and I might build it in the future if I go watercooling or need more space than my cosmos provides, just not sure if its too big... at ~ 28.5"x16"x9"
Rear 3/4 ... front 3/4 ... and side
Material would be oak plywood with dado joint 1/8" to fit it together, and metal pieces from salvaged case, mountain mods 5x5.25 bay, a few rad grills. I'd probably put an interior brace panel too as well as a motherboard tray obviously.
This is pretty conceptual right now. I could use some design input on doors/side panels. I could use lexan but I have never had much luck getting a clean cut with thick lexan.
edit:
heres the same thing shortened to 28" height so it fits under a "standard" table height
Rear 3/4 ... front 3/4 ... and side
Material would be oak plywood with dado joint 1/8" to fit it together, and metal pieces from salvaged case, mountain mods 5x5.25 bay, a few rad grills. I'd probably put an interior brace panel too as well as a motherboard tray obviously.
This is pretty conceptual right now. I could use some design input on doors/side panels. I could use lexan but I have never had much luck getting a clean cut with thick lexan.
edit:
heres the same thing shortened to 28" height so it fits under a "standard" table height
Last edited: