Recent content by maxo

not much change i did up the voltage on the SPP and some other voltages but i still need 1.48750v for a stable OC at 3.4GHZ anything under that voltage i get instabilities, i disables all power saving features settings are : 9.5x fsb at 1523 900mhz RAM CPU core 1.48750v SPP 1.3v MCP...

but in my system i get the blue screen of death if i dont set my voltage high enough , as of right now at 3.4GHZ i need to set my voltage at 1.456 volts to get stablity, if i dont she crashes on me , i dont know what other settings to compisate for the high voltage.

Here are my specs 1000 watt galaxy DX X power supply E7200 CPU 780i mobo 4gigs 800MHZ 6400 Buffalo ram BFG GTX 260 video card with my hardware configuration, if i want an OC of 3.5GHZ i need to up my voltage to at least 1.45625 volts for it to be stable. My question is how are some of...

so BarbaricSoul do you think the setup i have now would be safe? CPU at 1.39v. At idle Real Temp reads 43 degrees Celsius. So far everthing seems stable , i benchmarked, 3dmark06 gave me a score of 14342.

Hey guys i have the E7200 CPu with the EVGA nforce 780i SLI Here are my specs 1000 watt galaxy DX X power supply E7200 CPU 780i mobo 4gigs 667 5300 Crucial ram BFG GTX 260 video card Right now i have my system overclocked to 3.2GHZ from 2.53GHZ with stock cooling, do any of you know...

which bios should i use? I have an sapphire radeon 9550 256 MB Device ID 4153 Chip type RV350 Mem bus 128-bit 256MB RAM Active Pipes 4 Samsung Memory 5.0 I can over clock my GPU from 250/stock to over 360 i havent tried any higher ram only goes to about 215 MHZ above that artifacts will...

I have an sapphire radeon 9550 256 MB Device ID 4153 Chip type RV350 Mem bus 128-bit 256MB RAM Active Pipes 4 Samsung Memory 5.0 I can over clock my GPU from 250/stock to over 360 i havent tried any higher ram only goes to about 215 MHZ above that artifacts will apear Anyway which...