• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

TPU's WCG/BOINC Team

Radical_Edward said:
I got it mostly set up, should have it running WGC tomorrow. :D

It's a Q8400 2.26ghz, what points should I expect?
Click to expand...

Awesome Rad!! I would think somewhere around 2,000 per day?

Does that sound about right CP?
 
stinger608 said:
Awesome Rad!! I would think somewhere around 2,000 per day?

Does that sound about right CP?
Click to expand...

I would say at those clocks it's about 1500, at least according to ION's PPD estimator.
 
Chicken Patty said:
I would say at those clocks it's about 1500, at least according to ION's PPD estimator.
Click to expand...

Still not bad numbers though! Thanks for chiming in on that CP:rockout::rockout::rockout:
 
I'd clock it up, but it's running a stock cooling in a POS case, so until I can grab some parts from around the workplace, it'll be what it is now.
 
stinger608 said:
Still not bad numbers though! Thanks for chiming in on that CP:rockout::rockout::rockout:
Click to expand...
No problem dude. :) Not bad like you said, better than "0". :rockout:

Radical_Edward said:
I'd clock it up, but it's running a stock cooling in a POS case, so until I can grab some parts from around the workplace, it'll be what it is now.
Click to expand...

Even at stock, it helps, thanks dude. :toast:
 
I wandered over the WCG forums tonight. It's been months since I was there last - at least for the purpose of seeing what was shaking on the forums. It looks like there is a problem validating work units. Best guess from one of the CA's is that the problem started around 2100 UTC.

No indication what the problem is or when it will be fixed so if you're checking your results status and see a lot of pending wu's, this is most likely the problem.

https://secure.worldcommunitygrid.org/forums/wcg/viewthread_thread,31563
 
twilyth said:
I wandered over the WCG forums tonight. It's been months since I was there last - at least for the purpose of seeing what was shaking on the forums. It looks like there is a problem validating work units. Best guess from one of the CA's is that the problem started around 2100 UTC.

No indication what the problem is or when it will be fixed so if you're checking your results status and see a lot of pending wu's, this is most likely the problem.
Click to expand...

Good info, maybe you wanna post this in this thread as well?

WCG news update
 
I was a few days late getting started since i was on vacation and just got done setting up both rigs and the raid 0 on the i7 but now that it is done i am crunching full force on the Phenom and part time on the i7 for VW.
 
Have this build that I'm just waiting for CPU and RAM and she will be a dedicated cruncher 24/7;)

D5400XS_1.jpg


D5400XS_2.jpg
 
what board is that ? looks effin nice
 
was about to say it was the skully :D

could have got same board a few weeks back with dual qx9770s or whatever its called for 400$
 
(FIH) The Don said:
was about to say it was the skully :D

could have got same board a few weeks back with dual qx9770s or whatever its called for 400$
Click to expand...

You should have, for that price it is a steal.
 
well, decided to wait and get 2nd SB cruncher, then i also got a cheap offer on the 930 setup with 12gb of doms
but yeah, it would have been nice :)
 
Couldn't get my Bonic to download projects on the work PC, I'll try and reinstall on Monday to see if that works.
 
Run over by a pick-up

I just had the feeling that a F150 pick-up truck ran over me. Strange dream, back to sleep. Nope, not possible. Hmm what to do to fend of my team position? Got an old CPU laying in a drawer somewhere and some idle equipment somerwhere else. Give me a few day and I will try to snap at his heels :laugh: Great job there Reaptor :toast:

Edit: Ordered a UD5 X58, HD and PSU. New build :)
 
Last edited:
mstenholm said:
I just had the feeling that a F150 pick-up truck ran over me. Strange dream, back to sleep. Nope, not possible. Hmm what to do to fend of my team position? Got an old CPU laying in a drawer somewhere and some idle equipment somerwhere else. Give me a few day and I will try to snap at his heels :laugh: Great job there Reaptor :toast:

Edit: Ordered a UD5 X58, HD and PSU. New build :)
Click to expand...

...and that's why friendly competition is good. Great job, keep up the spirit. Oh, and yeah, F150 is definitely a power cruncher, he's doing a marvelous job. :rockout: :toast:
 
The new 2720M is up and running (80 C). Planing to do a week burn in. It's see how long she last. One hex is back in the loop for a day or so. It so nice to have control over all my toys again after 8 weeks with only a T5600.

Edit: two hexs. It did fail twice in 8 hours in folding. Now she's on a different diet.
 
Last edited:
hey guys! I don't know how many of you guys play Battlefield Bad Company 2, but if you do check out this little project i've been working on! here If you don't play... check it out anyway.. hehehe :roll: :roll: I don't really play it that much, but I have enjoyed working on this project. I will be building one for BF3 for sure and I plain to play it a lot.. hehehe Oh and I'm almost ready to release a fresh new build for "WCG EZ Config". :toast:
 
I cant get PB to work on any of my games :confused:or I would give it a try.
 
Mindweaver said:
hey guys! I don't know how many of you guys play Battlefield Bad Company 2, but if you do check out this little project i've been working on! here If you don't play... check it out anyway.. hehehe :roll: :roll: I don't really play it that much, but I have enjoyed working on this project. I will be building one for BF3 for sure and I plain to play it a lot.. hehehe Oh and I'm almost ready to release a fresh new build for "WCG EZ Config". :toast:
Click to expand...

I have been keeping up with that thread MW! That looks so awesome man. I have not played BFBC2 in a couple of months:o So busy with work and college I just don't have much time for playing at the moment. That will be changing in about 8 months though, as I will have my BA around then:rockout:
 
Bow said:
I cant get PB to work on any of my games :confused:or I would give it a try.
Click to expand...

Have you used TheMailMan78's thread on how to fix Punkbuster?

stinger608 said:
I have been keeping up with that thread MW! That looks so awesome man. I have not played BFBC2 in a couple of months:o So busy with work and college I just don't have much time for playing at the moment. That will be changing in about 8 months though, as I will have my BA around then:rockout:
Click to expand...

Thanks! and Nice bro! All of that hard work will pay off! :toast:
 
I have several times and he even had me try a few other things and it still will not work, None of the games that I have that run PB work.......going to try a reformat and fresh win install
 
You must log in or register to reply here.

Similar threads

T0@st
AMD Discusses "World Changing" LUMI Supercomputer - Powered by EPYC CPUs & Instinct GPUs
Replies
1
Wye
W
AleksandarK
Unreal Engine 5.6 Brings 60 FPS Ray Tracing to Current-Generation Hardware
2 3
Replies
53
lexluthermiester
lexluthermiester
AleksandarK
Argonne Releases Aurora: Intel-based Exascale Supercomputer Available to Researchers
Replies
3
john_
john_
btarunr
Intel and Lenovo Set a New Standard for AI-Powered PC Experiences
Replies
3
phanbuey
phanbuey
T0@st
Razer & Amazon Web Services Team Up - Revolutionary AI Game Developer Tools Coming Soon
Replies
6
MHD34567
M
Back
Top