Alcpone's Official 3DMark '06 Compilation

[Xtant25]

Scores have been updated.

 

[deagle]

ooooops sorry

Validation enough?

CPUZ valid

 

[Xtant25]

Scores updated again.

 

[Tatty_Two]

Fook Trt.....1.6+V

 

[Deleted member 24505]

i've tried my 6750 at 1,6v,i thought it was gonna burnbut it was ok.still never made it to windows tho' at 515fsb

 

[DOM]

i've tried my 6750 at 1,6v,i thought it was gonna burnbut it was ok.still never made it to windows tho' at 515fsb

give it some more v-core

 

[Tatty_Two]

i've tried my 6750 at 1,6v,i thought it was gonna burnbut it was ok.still never made it to windows tho' at 515fsb

I have booted to windows at 4.3Gig on 1.62V but didnt run any apps.....too scared, these chips run cool on G0 stepping but in theory that should mean they are likely to fry more easily!

Can't do any stable decent benches in any case on air beyond just under 4.2Gig apart from SuperPI so it dont make any difference really.

 

[strick94u]

another 400bucks and I get an over heating pc and not even 2500 more points

looks like I need water cooloing on my gpu's.

SLI 2 evga 8800 gts SuperClocked cards

 

[pbmaster]

66*C is hardly close to overheating....

 

[strick94u]

66*C is hardly close to overheating....

thats what its down to after 10 minutes was 84c
no room in this case for secound card to breath

 

[pbmaster]

Ah well, 84*C is not acceptable. Water cooling FTW!

 

[strick94u]

Well it has a lot to do with space there is a X-fi sound card between the two 8800's and about 1 inch between #2 card and the floor of the case. I was forced to use the thermaltake bach vx
the cm stacker 830 I have has some sort of problem no mother board will boot in it. Waiting to hear from cooler master. Perhaps the X-Fi will go away and if I can get the stacker to work......................

 

[pbmaster]

My card doesn't get anywhere near that hot, but then again I only have one of them in a rather roomy case.

 

[Tatty_Two]

another 400bucks and I get an over heating pc and not even 2500 more points

looks like I need water cooloing on my gpu's.

SLI 2 evga 8800 gts SuperClocked cards

Lol thats a bit sad really

 

[Tatty_Two]

1, orion23 - XFX 8800GTX @ 655/955 - 14446 - Q6600 @ 3897.3Mhz - 433FSB
2, HookeyStreet - BFG 8800GTXOC @ 610/950 - 13546 - Q6600 @ 3402.3Mhz - 378FSB
3, Live Or Die - XFX 8800Ultra @ 675/1150 - 13493 - E6850 @ 3975.1Mhz - 441.7FSB
4, thebeephaha - eVGA 8800GTX @ 626/1000 - 13328 - Q6600 @ 3000.1Mhz - 333.3FSB
5, trt740 - eVGA 8800GTX @ 660/1044 - 13283 - E6600 @ 3903.7Mhz - 433.7FSB
6, Jadawin - Gainward Bliss 8800GTX @ 650/1000 - 13118 - Q6600 @ 3300Mhz - 368FS


Let me correct this sell both 8800 gts 640 cards and buy one 8800gtx , buy the thermalright h03 and overclock the hell out of it and pocket any extra cash. Thats my old card look at it's clock speed with a Thermalright on it. That bench is about 5 months old with newer drivers I have moved up and been number 3 atleast. My cards the second fastest clock listed. you might also consider a 2900 xt 1 gig ddr 4 it will just about match a 8800 gtx now that the drivers are better and according to most people it has only reached about 80% of it's potential.

If he is running his E6600 at 3.3Gig it will make no difference, either of those setups will be bottlenecked, he is better off staying as he is and overclocking his CPU more or get some really good CPU cooling to push it further.

 

[Tatty_Two]

Also I thought you had a second 8800 gts coming did you get it.

No a new mobo and two 2900Pro's maybe's.

 

[Tatty_Two]

I might be the upgrade King but Tatty your the prince for sure . I bet the cpu's will be AMDs aswell.

No same CPU, maybe's a P38 XFire with DDR3......just browsing thru whats available at the moment, amj thinking of treating myself for giving up smoking

 

[Tatty_Two]

Take a look at this Muvvaa:

http://www.gigabyte-usa.com/Products/Motherboard/Products_Overview.aspx?ProductID=2601

 

[Tatty_Two]

It's nice but my board and it are similar and that boards alot of money here big money

Well yeah but 1600FSB ready.......DDR3 enabled..........45nm enabled.......Xfire.......and so on.

It is expensive over here too but I for once just might go "top spec" and then touch nothing for a year.

 

[Tatty_Two]

You can't do it your just like me.

Well not quite, I am better looking and dont wear glasses

 

[strick94u]

Whats sad about that Look this cpu isn't even overclocked in that bench. That darn good with no cpu overclocking.

yes its at 3300 its the new cpu-z its messedup

 

[deagle]

@ Tatty
atm no advantage in performance with ddr3


a little Xfire speedup with de X38-DQ6

deagle - Sapphire HD2900XT X-Fire @ 743/828 - 20.173 - Q6700 @ 4100 Mhz - 455.9FSB
ORB

 

[Tatty_Two]

@ Tatty
atm no advantage in performance with ddr3


a little Xfire speedup with de X38-DQ6

deagle - Sapphire HD2900XT X-Fire @ 743/828 - 20.173 - Q6700 @ 4100 Mhz - 455.9FSB
ORB

When you say no advantage in performance with DDR3 what exactly do you mean? running at 1400Mhz has gotta be a performance advantage over running at 1170 which is the best my ddr2 will do?

 

[deagle]

running DDR3 1333 against DDR2 1150 = same Score in 32MB superpi Test

test ddr2 vs. ddr3

it looks like the Memorycontroller bottlenecked the mem speed, and the ddr3 Memory runs with looser timings CL7, 8. 9...

Memory Bandwith (theoretical) Single/Dual channel

DDR2-533 266 MHz 4,2 GB/s 8,4 GB/s
DDR2-667 333 MHz 5,3 GB/s 10,6 GB/s
DDR2-800 400 MHz 6,4 GB/s 12,8 GB/s
DDR2-1066 533 MHz 8,5 GB/s 17,0 GB/s
DDR3-1066 533 MHz 8,5 GB/s 17,0 GB/s
DDR3-1333 666 MHz 10,6 GB/s 21,2 GB/s
DDR3-1600 800 MHz 12,8 GB/s 25,6 GB/s

The (theoretical) FSB Bandwith of on intel Bus Speed with FSB 333, is round about 10,6 GB/s, with an FSB 500 = ~ 15,1 GB/s, so the Intel Bus-system is the Bottleneck

 

[Tatty_Two]

running DDR3 1333 against DDR2 1150 = same Score in 32MB superpi Test

test ddr2 vs. ddr3

it looks like the Memorycontroller bottlenecked the mem speed, and the ddr3 Memory runs with looser timings CL7, 8. 9...

Memory Bandwith (theoretical) Single/Dual channel

DDR2-533 266 MHz 4,2 GB/s 8,4 GB/s
DDR2-667 333 MHz 5,3 GB/s 10,6 GB/s
DDR2-800 400 MHz 6,4 GB/s 12,8 GB/s
DDR2-1066 533 MHz 8,5 GB/s 17,0 GB/s
DDR3-1066 533 MHz 8,5 GB/s 17,0 GB/s
DDR3-1333 666 MHz 10,6 GB/s 21,2 GB/s
DDR3-1600 800 MHz 12,8 GB/s 25,6 GB/s

The (theoretical) FSB Bandwith of on intel Bus Speed with FSB 333, is round about 10,6 GB/s, with an FSB 500 = ~ 15,1 GB/s, so the Intel Bus-system is the Bottleneck

Right....thanks, so there is no point in spending all that extra money!