- Joined
- Dec 23, 2015
- Messages
- 5 (0.00/day)
Processor | AMD FX8350 Black Edition |
---|---|
Motherboard | M5A99X Evo R2.0 |
Memory | DDR3 4GB x 2 |
Video Card(s) | Sapphire Dual-X R9-270X |
Storage | WD Purple 1TB |
Case | Cooler Master K350 Mid Tower |
Power Supply | GXII Pro 750W |
Mouse | G502 Proteus Core |
Keyboard | Nighthawk Kai-5 |
Software | Windows 7 Ultimate 64-bit |
I've been experiencing auto shutoffs most probably due to overheating since they mostly occur during gaming sessions where the temperatures reach approximately 80C according to All CPU Meter. This is without overclocking any parts. Right now, I'm only using the stock cooler for my processor and 2 additional stock casing fans as well. My casing is a K350 mid tower that supports 4 120mm fans. Currently, I'm interested in swapping out the cooler to a Cryorig H7 and putting 2 new fans on it, removing the QF120 stock fan of the H7. Additionally, I'd like to setup a couple more casing fans just in case. Hence, several questions.
1. Will the H7 be sufficient to cool down my CPU compared to the stock cooler ?
2. Which fans should I get ? I have Blade Master 120, SickleFlow 120 2000RPM and the XtraFlo in consideration. ( It's not that I'm unwilling to switch to other brands or model but these are the more accessible parts for me. Will still take any suggestions though. )
3. Which fans should be setup on the H7 for a push/pull and which should be case fans ? While I'm familiar with the more CFM, the better, I am worried whether different fans all with different RPM and CFM will cause airflow obstructions.
TL;DR : A K350 case with cooler Cryorig H7 push/pull formation. 2 new fans on the front and rear of the PC casing, the original QF 120 on the side (not sure if that's compatible ?) Otherwise, the 2 stocks fans are relegated to side and bottom positions. Basically a tornado jet engine of a desktop. Any and all help will be greatly appreciated. Thanks.
1. Will the H7 be sufficient to cool down my CPU compared to the stock cooler ?
2. Which fans should I get ? I have Blade Master 120, SickleFlow 120 2000RPM and the XtraFlo in consideration. ( It's not that I'm unwilling to switch to other brands or model but these are the more accessible parts for me. Will still take any suggestions though. )
3. Which fans should be setup on the H7 for a push/pull and which should be case fans ? While I'm familiar with the more CFM, the better, I am worried whether different fans all with different RPM and CFM will cause airflow obstructions.
TL;DR : A K350 case with cooler Cryorig H7 push/pull formation. 2 new fans on the front and rear of the PC casing, the original QF 120 on the side (not sure if that's compatible ?) Otherwise, the 2 stocks fans are relegated to side and bottom positions. Basically a tornado jet engine of a desktop. Any and all help will be greatly appreciated. Thanks.