- Joined
- Oct 6, 2005
- Messages
- 10,242 (1.50/day)
- Location
- Granite Bay, CA
System Name | Big Devil |
---|---|
Processor | Intel Core i5-2500K |
Motherboard | ECS P67H2-A2 |
Cooling | XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16" |
Memory | 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9 |
Video Card(s) | EVGA GTX 780 ACX SC |
Storage | Intel 520 Series 180GB + WD 1TB Blue |
Display(s) | HP ZR30W 30" 2650x1600 IPS |
Case | Corsair 600T SE |
Audio Device(s) | Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500 |
Power Supply | ABS SL 1050W (Enermax Revolution Rebadge) |
Software | Windows 8.1 x64 Pro w/ Media Center |
Benchmark Scores | Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black |
I've been messing around with Google SketchUp (recommended to me by Christine aka calvary1980), and I wanted to show you guys what I came up with so far for the front panel of the Cosmos S.
I did my best to make this to scale, but it's hard to tell exactly how much the "handles" and "feet" factor into the height and width.
We've got TEN 5.25 bays to work with, so I thought, why not use nine for 120mm fans?
I'd like to eventually make a piece of modder's mesh that replaces the perforated aluminum (colored in dark gray in my sketch) for the nine bays that will house the fans. The "bay" below the last fan is actually not a bay (I don't think), so that would be perfect for...90degree barbs!
I'm going to mod this thing to take TWO Triple 120mm Radiators. That will also balance out the airflow. One 120mm intake on the bottom, three intake in front, one exhaust out back, and three exhaust on top. Keep in mind, the PSU has its own air duct, so the PSU's fan will not factor into the system.
I plan to use A.C. Ryan Blackfire 4 UV LED Fans.
Let me know what you guys think! More messing around to come before the case arrives!
By the way, I kinda wanted to show this off
Very subtle 3D characteristics on the DVD Burner. It's amazing what this program can do!
I did my best to make this to scale, but it's hard to tell exactly how much the "handles" and "feet" factor into the height and width.
We've got TEN 5.25 bays to work with, so I thought, why not use nine for 120mm fans?
I'd like to eventually make a piece of modder's mesh that replaces the perforated aluminum (colored in dark gray in my sketch) for the nine bays that will house the fans. The "bay" below the last fan is actually not a bay (I don't think), so that would be perfect for...90degree barbs!
I'm going to mod this thing to take TWO Triple 120mm Radiators. That will also balance out the airflow. One 120mm intake on the bottom, three intake in front, one exhaust out back, and three exhaust on top. Keep in mind, the PSU has its own air duct, so the PSU's fan will not factor into the system.
I plan to use A.C. Ryan Blackfire 4 UV LED Fans.
Let me know what you guys think! More messing around to come before the case arrives!
By the way, I kinda wanted to show this off
Very subtle 3D characteristics on the DVD Burner. It's amazing what this program can do!
Last edited: