-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
editing atitool config...
- Thread starter DAMIEN666
- Start date
- Joined
- May 14, 2004
- Messages
- 27,052 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
between those two settings very little differences.
the first one allows single pixel artifacts which can sometimes be caused by driver bugs and are not a real error
the first one allows single pixel artifacts which can sometimes be caused by driver bugs and are not a real error
the reason i ask is i have a BFG OC 8800gtx (stock = 600/1400/1800)
well i o/ced it @ 620/2000 and it was fine and ran atitool (2nd pic setup) but then i put the clock @ 635/2000 and i found errors after 10min
my temps are fine @ 60'c fully loaded so would i be best to leave the setting at default
- Joined
- Nov 12, 2006
- Messages
- 2,996 (0.47/day)
| System Name | COLOSSUS-MK4 |
|---|---|
| Processor | E8400 @4.4 GHz - FSB @550 MHZ |
| Motherboard | Asus P5K Premium (Black Pearl) |
| Cooling | Xigmatek HDT-S1283 |
| Memory | 2x1GB Geil BlckDrgn 800 @1158 5-5-5-18 |
| Video Card(s) | 8800GT 512MB @740/1782/2080 |
| Storage | Hitachi T7K250 250GB & 7200.10 Seagate 250GB |
| Display(s) | Gateway FPD1975W 19" Widescreen |
| Case | Antec 1200 |
| Audio Device(s) | Xi-FI Xtreme Audio |
| Power Supply | CoolerMaster IGreen 500W |
| Software | XP Home SP3 |
| Benchmark Scores | SuperPi: 10.563 Sciencemark: 2563.14 |
Thanks W1z, that's actually really useful to know. I myself had no idea of this.