[FS][US] EVGA GTX680, SOLID! 2600k, Watercooling, Seasonic PSU, & MORE

[michaelrw]

EVGA Z77-FTW Motherboard - $299 shipped SOLD

EVGA GeForce GTX 680 SC Signature+ w/Backplate - $489 shipped SOLD
2439.49 Heaven Benchmark - Extreme Preset @ 1250mhz GPU Core

2600k - 55x bench, 5.0ghz 4 core 1.376v, 4.8ghz 4C8T 1.328v stable$250 SOLD

(3x)(2x)(1x) Swiftech MCP35x Water Pumps - $65 shipped per pump 2 SOLD to BlueMarker - 1 LEFT! ALL SOLD



1/2'' ID FITTINGS ASSORTMENT - $40 shipped SOLD SOLD
**(2) koolance 90 degree rotary barbs
**(2) enzotech 45 degree rotary barbs
**(2) enzotech 30 degree (or 60, depending on how you define your angle) rotary barbs
**(6) XSPC black chrome compression fittings
**(8) replacement O-rings

Anti-Kink Coils (for 3/4'' OD Tubing) - FREE CLAIMED!!


XSPC Dual-pump,Dual-bay res - $47.5 shipped
**fits two DDC style pumps (MCP35x/355/350 etc.) but only needs one
**can run one OR two pumps in same loop or have two separate loops
**comes with extra faceplate (silver, aluminum) to go along with the black one





NZXT SWITCH 810 White - $129 SHIPPING INCLUDED!! SOLD

2x120mm Coolgate rad - $59 shipped
**comes with rubber fan gaskets and all mounting hardware
SOLD

3x140mm Coolgate rad - $79 shipped
**comes with rubber fan gaskets and all mounting hardware

EK GTX680 Full Cover block - $80 shipped SOLD


XSPC RayStorm High Performance Acetal - Intel
PRICE: $35 shipped


XSPC Raystorm Full Copper - $70 shipped

5 BNIB - BGears Blaster 140mm fans SOLD

4 BNIB - Gentle Typhoon AP-15 120mm fans SOLD

SeaSonic M12II 620 Bronze 620W Modular PSU
Bought this in february, lightly used. Comes with all cables, original box, carrying case/pouch.
(NEW: $90)
PRICE: $55 shipped SOLD

Swiftech MCP35X Reservoir - Revision 2b
PRICE: $10 SOLD

EK-VGA Supreme HF - Acetal
(NEW: $56.95 + shipping)
PRICE: $40 shipped SOLD SOLD SOLD
EK Mounting plate GF460: this was bought to mount the block to my non-reference GTX560 Ti. I also have the standard universal mounting plate (not pictured) that came with the block. MOST cards will accommodate this block with no problems. Check EK Cooling Configurator, put in your card info, and make sure the EK VGA Universal will fit.

Swiftech MCR220-XP eXtreme Performance Radiator Series
240mm (120mm x 2) Radiator
(NEW: $47.99 + shipping)
PRICE: $39 shipped - SOLD

Corsair Carbide Series 500R White - ATX Mid Tower
PRICE: $110 shipped SOLD


I will consider trades for certain graphics cards, ln2 pots/equipment, maximus v gene...

Amazon Payments is the preferred method. Anyone who has an amazon account can easily use this method. If you don't have an Amazon account, it take 5 minutes to make one lol.
(If for some strange reason Amazon Payments is not feasible, PayPal can be accepted)

MY HEATWARE

THANKS FOR LOOKING!

 

[sneekypeet]

Gave you 15 minutes to fix the images. I have since removed those that don't follow the rules.

 

[Mohammed]

WoW.

Is that motherboards full compatible with that Case ?

 

[michaelrw]

Yes everythingyou see here fits inside of that case, including the motherboard and water cooling setup.

 

[michaelrw]

pump sold to Blue Marker

 

[michaelrw]

^

 

[nleksan]

May be interested in the Swiftech Rad, for the bottom of my Switch, just trying to figure out if I should get an XSPC EX420 for the top...

 

[michaelrw]

yeah i used to have that rad in my switch 810 with push/pull fans..
I have this 420mm radiator in the top of mine that i may be up for selling if youre interested.

heres a picture of it (kinda hard to see). its an awesome rad, only 2 months old, perfect condition

By michaelrw at 2012-06-13

 

[michaelrw]

Am breaking down my loop in the Switch 810 pictured in the above post and will be listing all of the components soon! Will have 2 more MCP35x pumps, coolgate 3x140mm, coolgate 2x120mm, xspc dual-pump dual-bay res, GTX680 EK block, XSPC Raystorm copper, etc.

Check back soon for updates!

 

[michaelrw]

bump

 

[nleksan]

What processor were you running on those rads, and what was your deltaT like? I'm really looking hard at the XSPC EX420 for the top, but I am still undecided for a bottom rad (just made a post asking for some advice in OC&C section). I plan on running just the 3930K initially, but adding a 670/680 and then eventually a second GPU. I would love to run my CPU on a 3x140 + 2x120mm setup, though! Let me know when you have your stuff up for sale. I am not really familiar with Coolgate but I would love to hear more about your setup! Thanks!

 

[michaelrw]

Ok bro. You'll love this setup. It's about as good as you can get. The Coolhate rads are very similar to the xspc rads except they're more versatile in terms of in/out ports. Skinnee Labs did a rad roundup with One of the Coolgate rads, you should check it out. With both rads and dual pump you'd have the most cooling power possible that will fit inside of a case. I'm putting everything up for sale tomorrow. Water/air Delta T is as low as 4-5 degrees depending on how fast your fans are running. I should have everything up tomorrow and I'll PM you as soon as its up

 

[michaelrw]

bump - updated, added new items

 

[badb0y]

Can a dual rad fit in the bottom of the 500r? Nothing too thick something like a EX240.

 

[michaelrw]

there is def room for it if you leave out the bottom hdd rack (which is already out, as seen in the picture). There are also factory-drilled mounting holes in the bottom of the case.

 

[nleksan]

I am wondering what you are looking for specifically in a trade? PM me if you have the chance... I would love to get a second MCP35X! I am also curious as to your opinion on the Bgears Blaster 140mm fans, as I have pretty much decided on the XSPC EX420 for the top of my case, and your price is very good! I also am trying to decide if the Swiftech MCR220XP would be a good second rad in my situation, and I would love to hear your thoughts. Thanks!

 

[michaelrw]

I am wondering what you are looking for specifically in a trade? PM me if you have the chance... I would love to get a second MCP35X! I am also curious as to your opinion on the Bgears Blaster 140mm fans, as I have pretty much decided on the XSPC EX420 for the top of my case, and your price is very good! I also am trying to decide if the Swiftech MCR220XP would be a good second rad in my situation, and I would love to hear your thoughts. Thanks!

the bgears b-blaster fans are monster fans that push a ton of air. If youre going to use these fans, you need to have them on a fan controller or have some way of controlling their speed. I ran mine (the ones for sale are brand new never been opened) at about half speed most of the time, but during heavy gaming or running 3D benchmarks I would def crank them up! Theyre the closest thing to a high-RPM gentle typhoon I could get in a 140mm size

the MCR220 will go nicely with an EX420. They are similar rads in terms of thickness. On its own, the MCR220 is a very good performing radiator. They say it benefits from fans greater than 1000rpm, as its fin density is a little higher than average, but I've had it in the bottom of my switch 810 in push/pull with 4 800rpm fans and it performed really well.

I will PM you about trades

 

[michaelrw]

bump

 

[nleksan]

Look forward to hearing from you!

 

[michaelrw]

pm sent

 

[michaelrw]

make me some offers!
lets get some of this stuff sold and put to good use!

 

[michaelrw]

added EVGA GTX680 Signature+

 

[nleksan]

Working on my budget, but I am seeing a Swiftech Rad plus fittings in my future...

 

[michaelrw]

sounds good buddy. ive got a lot of things to sell so this thread should be open for a little while. PM me if you have trade propositions for me.

 

[michaelrw]

prices reduced
bump