OrbitzXT
New Member
- Joined
- Mar 22, 2007
- Messages
- 1,969 (0.32/day)
- Location
- New York City
System Name | AX-01 |
---|---|
Processor | Intel Core i5-2500K @3.7 GHz |
Motherboard | ASRock Z68 Extreme3 Gen3 |
Cooling | Zalman 9700 |
Memory | Kingston HyperX T1 Series 8GB DDR3 1600 MHZ |
Video Card(s) | GTX 590 |
Storage | Intel X25-M |
Display(s) | 42" Samsung LED HDTV |
Case | Antec Twelve Hundred |
Audio Device(s) | HT | OMEGA STRIKER 7.1 |
Power Supply | Kingwin 1000W |
Software | Windows 7 64-Bit |
I had an old PC in my office that I had put 2 SSDs in a RAID 0 array in. We ended up buying new parts, sans the SSDs and reusing those. I did not want to reinstall Windows 7 and tried to see if the PC would work without a clean installation. It did, I uninstalled all the drivers and installed the new ones. Everything seemed fine, except the transfer speeds over the network are extremely slow. It's a 100 MBPS switch we use, which should be about 11 MB/s, but this PC is getting about 17 KB/s. The SSD's transfer rate is fine when copying to itself. The speedtest results are fine too, it's only over the network that I have issue. What could be causing this?