WarEagleAU
Bird of Prey
- Joined
- Jul 9, 2006
- Messages
- 10,812 (1.66/day)
- Location
- Gurley, AL
System Name | Pandemic 2020 |
---|---|
Processor | AMD Ryzen 5 "Gen 2" 2600X |
Motherboard | AsRock X470 Killer Promontory |
Cooling | CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert) |
Memory | 32 GB Geil EVO Portenza DDR4 3200 MHz |
Video Card(s) | ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C |
Storage | WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others. |
Display(s) | ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget |
Case | Fractal Define R6 C |
Audio Device(s) | Realtek 5.1 Onboard |
Power Supply | Corsair RMX 850 Platinum PSU (Newegg Eggxpert) |
Mouse | Razer Death Adder |
Keyboard | Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth) |
Software | Windows 10 Pro x64 |
Didnt know where else I should put this so I figured this place would be as good as any. I took the TT Easy Spirit II and took my premium lap kit (from http://www.easypckits.com) and went step by step using water, glass plate (literally) and some laundry/dish detergent (ran out of laundry cause it was like bone dry) and followed the directions from D44ves and W1zzards articles. Also, I followed the directions of the kit (it had some useful tips.) Below, are pics of my heatsink. I used 3m rubbing compound followed by a water particle based 3000 grit gelatinous type of mixture to get my end results.
I was really impressed with how easy, simple and time consuming it was. However, now I know I can lap anything Next thing is, even though I put MX-2 on my HIS Video Card, I didnt lap that copper core that covers the GPU. That is one rough cookie. I may attempt that in the future.
P.S. Thats my backyard. I had to go outside (before we went swimming at the river) to get a decent shot. My flash was too much inside the house, even in well lit rooms.
(full blown view at 6.0 Megapixels. Smaller ones below)
I was really impressed with how easy, simple and time consuming it was. However, now I know I can lap anything Next thing is, even though I put MX-2 on my HIS Video Card, I didnt lap that copper core that covers the GPU. That is one rough cookie. I may attempt that in the future.
P.S. Thats my backyard. I had to go outside (before we went swimming at the river) to get a decent shot. My flash was too much inside the house, even in well lit rooms.
(full blown view at 6.0 Megapixels. Smaller ones below)