• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

gts 250 gigabyte 1g

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
hi all first post got my self a gts250 stock speeds 675 etc done a little overclock for the first time with rivertuner wat u thin and my fan speed always shows at 5 percent never goes up is that normally even runing furmark btw great site martn
 

Attachments

  • martyn.gif
    martyn.gif
    12.2 KB · Views: 578
Joined
Dec 7, 2009
Messages
1,793 (0.34/day)
System Name Old Skool
Processor E6750 @ 3.6 ghz
Motherboard GA P35 DS3L
Cooling Xigmatek Dark Knight S1283v
Memory 4gb Kingston DDR2 @ 900mhz
Video Card(s) XFX 9800GT 512MB
Storage SAMSUNG 320gb
Display(s) VIEWSONIC vx2260wm
Case HAF 922
Audio Device(s) Realtek (on board) + Logitech x540
Power Supply CM 550w
Software W7 Ultimate 64
Hey, welcome. Well the temps here in the pics look safe, to how much do they climb to on load? What driver version are you using? Have you put the fan control in "manual" mode in RT? If so, best let it manage it automatically.
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
using driver 187.13 beta fan on auto controll ran furmark benchmarking 1240by 1240 windows 7 64bit
 

Attachments

  • martyn.gif
    martyn.gif
    12.7 KB · Views: 529

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
any good settings to recommend on my gts250 new to overclocking
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
sry driver 197.13
 
Joined
Dec 7, 2009
Messages
1,793 (0.34/day)
System Name Old Skool
Processor E6750 @ 3.6 ghz
Motherboard GA P35 DS3L
Cooling Xigmatek Dark Knight S1283v
Memory 4gb Kingston DDR2 @ 900mhz
Video Card(s) XFX 9800GT 512MB
Storage SAMSUNG 320gb
Display(s) VIEWSONIC vx2260wm
Case HAF 922
Audio Device(s) Realtek (on board) + Logitech x540
Power Supply CM 550w
Software W7 Ultimate 64
You can easily get 100mhz and even more (I've seen 800mhz+ cloks on the gts250), just try and experiment with it, go up notch by notch, until you hit a wall and see strange things on your screen (dots or artifacts etc) For you fan speed problem, try another driver, or if it persists, try locking it manually (usually its 40% on idle and before you game etc just put it higher)
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
cheers thnks for taking the time to reply
 
Joined
Dec 7, 2009
Messages
1,793 (0.34/day)
System Name Old Skool
Processor E6750 @ 3.6 ghz
Motherboard GA P35 DS3L
Cooling Xigmatek Dark Knight S1283v
Memory 4gb Kingston DDR2 @ 900mhz
Video Card(s) XFX 9800GT 512MB
Storage SAMSUNG 320gb
Display(s) VIEWSONIC vx2260wm
Case HAF 922
Audio Device(s) Realtek (on board) + Logitech x540
Power Supply CM 550w
Software W7 Ultimate 64
Out of curiosity though, are the stock clocks really 675? The couple of gts250 I've handled were at 738 (stock) and an msi one which came factory OC, I remember it was higher.
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
incresed the clock speed to 800 temps went up to 64 degrees on fur mark but the fan did not increase stayed @ 5 percent could not hear it speed up? but if i manually turn it up i can hesr the fan speed up is there a temp to reach befrore the driver speeds up the fan tyvm martyn
 
Joined
Dec 7, 2009
Messages
1,793 (0.34/day)
System Name Old Skool
Processor E6750 @ 3.6 ghz
Motherboard GA P35 DS3L
Cooling Xigmatek Dark Knight S1283v
Memory 4gb Kingston DDR2 @ 900mhz
Video Card(s) XFX 9800GT 512MB
Storage SAMSUNG 320gb
Display(s) VIEWSONIC vx2260wm
Case HAF 922
Audio Device(s) Realtek (on board) + Logitech x540
Power Supply CM 550w
Software W7 Ultimate 64
Hm if you read my above post, I think you have the green edition. It uses less energy, so they've clamped down on power a bit. I don't know if it explains your gpu fan though.
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
yes the stock speed is 675 on manual its says GV_N250_1GI
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
dont say green edtion on the box?
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
Gv-n250-1gi On Box
 
Joined
Dec 7, 2009
Messages
1,793 (0.34/day)
System Name Old Skool
Processor E6750 @ 3.6 ghz
Motherboard GA P35 DS3L
Cooling Xigmatek Dark Knight S1283v
Memory 4gb Kingston DDR2 @ 900mhz
Video Card(s) XFX 9800GT 512MB
Storage SAMSUNG 320gb
Display(s) VIEWSONIC vx2260wm
Case HAF 922
Audio Device(s) Realtek (on board) + Logitech x540
Power Supply CM 550w
Software W7 Ultimate 64
Its been a while since I haven't had a gts250. Maybe someone else can help you on that. Most I've handled like I said earlier had the clock @ 738. But I remember once having a 9600gt green edition from palit in a customer's build, it was a green edition (it wasnt specified so on the box or manual) which had its clock lower than usual. I wouldn't worry about that though. 64 on load on a g92 is a pretty good temp tbh. They used to run hot.
 

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
this stock
 

Attachments

  • martyn.gif
    martyn.gif
    12.4 KB · Views: 580

martthefart

New Member
Joined
Mar 23, 2010
Messages
147 (0.03/day)
System Name martthefart lol
Processor amd 1090t 6 core 3.2
Motherboard gigabyte GA-990XA-UD3
Cooling all stock
Memory 6 gig ram ddr3
Video Card(s) gaimward gtx 460 756mb se
Storage samsung 320gig
Display(s) viewsonic va2213w
cheers any 1 tell y fan wont speed up auto?
 
Top