Help me overclock my 1090T

Heartz · Feb 25, 2016

erocker said:
Can you provide a link to the actual set you own? There's a lot of different Corsair Vengeance 1600 DDR3 sets. Some operate at 1.5v, some at 1.6v, etc.

Bought them a long time ago but it's these its the 1.5v: http://www.corsair.com/en-us/vengeance-8gb-dual-channel-ddr3-memory-kit-cmz8gx3m2a1600c9r

So now guys for the rest of the clock i read that i have to clock the NB, HT and RAM to get a more stable clock and more performance, anyone care to help em out with that?

So i've done this so far, can anyone help me out and see if im doing it right? or should i change something? everything is running stable, ive tried in Prime, Cinebench, 3d Mark and in some Games, can i run it more stable and get better performance??

Mussels · Feb 25, 2016

you could possibly get more out of the ram with looser timings and higher MHz, but it may not be worth it for any practical result.

tbh those numbers look pretty good for the hardware you've got - they're on the 'mild' side, but also in the ballpark thats easy to get stable and wont take insane wattages and heat to achieve.

Heartz · Feb 25, 2016

Mussels said:
you could possibly get more out of the ram with looser timings and higher MHz, but it may not be worth it for any practical result.

tbh those numbers look pretty good for the hardware you've got - they're on the 'mild' side, but also in the ballpark thats easy to get stable and wont take insane wattages and heat to achieve.

Ye thanks the problem is that im not that good in cpu oc. So i don't have a very good idea of how much higher i can go on voltage and mhz. Thats why im going baby steps. You think this is enough for my system? Should i stop here? How much higher on the RAM? they are 1600 Mhz at stock

Mussels · Feb 25, 2016

baby steps are the best steps. save it as a BIOS profile, and come back to it if you need it later.

If you have an unlocked multi (i think you do, been too long since i had that chip) just google the max safe 24/7 voltage, stick it to that and raise the multi til you fail to boot, or get crashes quickly in windows.

drop it one at a time until you're stable (tests, games, etc) and then work on tuning in the voltages - slowly lower the voltages until instability creeps in. My current OC for example got me roughly one BSOD a week, so i'm currently sitting at 4.7Ghz out of laziness, instead of raising voltages.

Schmuckley · Feb 25, 2016

Welcome to TPU.This is the best k10 OCing guide:
http://www.overclock.net/t/777378/o...verclocking-guide-with-too-many-smileys/0_100
The trick is in the order.Do multi last.

Things I know:
If this is for daily:
Vcore: 1.47 or less
CPU/NB: 1.37v
NB: 1.2-1.26
Ram tops out @ 1900-ish Mhz
CPU/NB will vary..

Heartz · Feb 27, 2016

i dont get it anymore, it's stable in every stress test but as soon as i play battlefield 4 its crashes after 15 minutes of play...help me out, should i lower the clock?

cdawall · Feb 27, 2016

Heartz said:
i dont get it anymore, it's stable in every stress test but as soon as i play battlefield 4 its crashes after 15 minutes of play...help me out, should i lower the clock?

That or raise the voltage

Mussels · Feb 28, 2016

Heartz said:
i dont get it anymore, it's stable in every stress test but as soon as i play battlefield 4 its crashes after 15 minutes of play...help me out, should i lower the clock?

when you fire up a game like that, you've got more power draw and more heat to deal with. this is why i always suggest synthetic and gaming tests.

DarkWilSin · Jan 4, 2017

I have I think almost the same thing Asus IV crosshair ROG with a AMD phenom Ii x6 1090t I would love to overclock everything I have in there to the max stable possible and my video card as well. A EVGA GTX 470 thanks if y'all need pictures tell me from what programs I have speccy and CPU z.

Johan45 · Jan 6, 2017

DarkWilSin said:
I have I think almost the same thing Asus IV crosshair ROG with a AMD phenom Ii x6 1090t I would love to overclock everything I have in there to the max stable possible and my video card as well. A EVGA GTX 470 thanks if y'all need pictures tell me from what programs I have speccy and CPU z.

To start turn off core unlocker so we can see the actual temps of the core and then do ~20 minutes of P95 with HW monitor open and take a SS. That way we can see temps/volts under load.
What is your CPU cooler

DarkWilSin · Jan 6, 2017

Johan45 said:
To start turn off core unlocker so we can see the actual temps of the core and then do ~20 minutes of P95 with HW monitor open and take a SS. That way we can see temps/volts under load.
What is your CPU cooler

that setting is in the bios correct just making sure ill go ahead and do that now. and post up screens.

love the queen alien icon.

P4-630 · Jan 6, 2017

@DarkWilSin you should start your own thread instead of using someone else's thread.

Johan45 · Jan 6, 2017

Yes it's in bios probably advanced>CPU settings
Been a big fan for years

DarkWilSin · Jan 7, 2017

P4-630 said:
@DarkWilSin you should start your own thread instead of using someone else's thread.

Why do that when there was one already made? but i will take your advise for next time.

they are unlocked and all on.

P4-630 · Jan 7, 2017

DarkWilSin said:
Why do that when there was one already made?

Thats how we do that here at TPU.

dorsetknob · Jan 7, 2017

DarkWilSin said:
Why do that when there was one already made? but i will take your advise for next time.

Your a Special person and we want you to have your own special Thread and not some one else's leaftovers

DarkWilSin · Jan 7, 2017

Here are the results. and thank you knob that was kind of you.

Mr.Scott · Jan 7, 2017

It is worthless because you did not listen.
You need to turn OFF core unlocker. A bi-product of unlocking cores is that it disables the temp sensor. Besides, there's nothing to unlock on a 1090. Half of the reason of having HWmonitor open is to see the temps.

DarkWilSin · Jan 7, 2017

hopefully this is what i was suppose to disable/turn off. let me know so i can run the test.

DarkWilSin · Jan 7, 2017

here hopefully i did correctly by shutting that off

Mr.Scott · Jan 7, 2017

Much better.
You have some room to overclock. You have room on both temps and voltage. Raise that CPU multi up a click and test again. If it passes, up it another click. If it fails, bump up the CPU voltage a click and test. Add voltage until it passes. Keep doing all of this until your temps are maxed (55-60) @ 100% load, or your CPU voltage hits 1.55v, whichever comes first.

DarkWilSin · Jan 8, 2017

Mr.Scott said:
Much better.
You have some room to overclock. You have room on both temps and voltage. Raise that CPU multi up a click and test again. If it passes, up it another click. If it fails, bump up the CPU voltage a click and test. Add voltage until it passes. Keep doing all of this until your temps are maxed (55-60) @ 100% load, or your CPU voltage hits 1.55v, whichever comes first.

Ok sorry to ask again Mr. scott and anyone out there. But um what do i do in this area.what do i raise here i do not see CPU multi here.

Mussels · Jan 8, 2017

CPU ratio is the name for it on your board

DarkWilSin · Jan 8, 2017

Mussels said:
CPU ratio is the name for it on your board

By click, does he want me to put it up by 1 for example if its at 245 i put it at 246 and test it and so on.

how about the voltage, witch one is the one i mess with?

Mussels · Jan 8, 2017

DarkWilSin said:
By click, does he want me to put it up by 1 for example if its at 245 i put it at 246 and test it and so on.

how about the voltage, witch one is the one i mess with?

the multi/ratio will be smaller numbers than that - like 20, 21 etc.

as for CPU voltage, use the CPU offset and raise that into positive numbers slowly only when unstable.

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

System Name	Some computer stuff
Processor	Mostly Intel or AMD
Motherboard	ATX or mATX
Cooling	Bong Cooler
Memory	DDR2-4
Video Card(s)	A few
Storage	Plenty Platters or SSDs or USBs
Display(s)	Samsung 23"
Case	5 on the floor
Audio Device(s)	There's one for my M7 Gene, Oh I have 3-4 PCI 5.1 ones.Sabrent! lol
Power Supply	750-1000W
Mouse	cheap
Keyboard	Used ps2 from garage sales
Software	Yeah
Benchmark Scores	http://hwbot.org/user/schmuckley/#Hardware_Library http://valid.canardpc.com/rbjpbg

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/

System Name	AlderLake / Laptop
Processor	Intel i7 12700K P-Cores @ 5Ghz / Intel i3 7100U
Motherboard	Gigabyte Z690 Aorus Master / HP 83A3 (U3E1)
Cooling	Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans / Fan
Memory	32GB DDR5 Corsair Dominator Platinum RGB 6000MHz CL36 / 8GB DDR4 HyperX CL13
Video Card(s)	MSI RTX 2070 Super Gaming X Trio / Intel HD620
Storage	Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2 / Samsung 256GB M.2 SSD
Display(s)	23.8" Dell S2417DG 165Hz G-Sync 1440p / 14" 1080p IPS Glossy
Case	Be quiet! Silent Base 600 - Window / HP Pavilion
Audio Device(s)	Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533
Power Supply	Seasonic Focus Plus Gold 750W / Powerbrick
Mouse	Logitech MX Anywhere 2 Laser wireless / Logitech M330 wireless
Keyboard	RAPOO E9270P Black 5GHz wireless / HP backlit
Software	Windows 11 / Windows 10
Benchmark Scores	Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock

System Name	Master
Processor	Pair of Xeon X5675's @ 4.3
Motherboard	SR-2 Classified
Memory	12 GB of Corsair Dominator GT's @ 2000 7-7-7-21
Video Card(s)	EVGA GTX680
Power Supply	EVGA Supernova 750

Help me overclock my 1090T

New Member

Attachments

Freshwater Moderator

New Member

Freshwater Moderator

New Member

where the hell are my stars

Freshwater Moderator

New Member

Attachments

New Member

New Member

"YOUR RMA REQUEST IS CON-REFUSED"

New Member

Attachments

New Member

Attachments

New Member

Attachments

New Member

Attachments

Freshwater Moderator

New Member

Freshwater Moderator