1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Help with E762 + i7 970

Discussion in 'Motherboards & Memory' started by kikicoco1334, Apr 23, 2011.

  1. kikicoco1334

    Joined:
    Nov 11, 2009
    Messages:
    283 (0.14/day)
    Thanks Received:
    53
    for some strange lords knows why but like i can't seems to clock anything higher than 220 on this chip, it's like it'll boot but not able to get any higher than where it's at right now...
    i am on LN2 right now and what's really funny is that before the best i ever got out of it was 225
    i know this is a really good chip and i should be able to do 230~240 if not any higher

    and i don't know what did i do but Turbo mode never kicks on anymore... even if i reset the biso

    Extreme Cooling [Mode 2]
    CPU Clock Ratio [ 24x ]
    CPU Host Frequency [ 220 ] <- trying to get this to work...
    MCH Strap [ AUTO ]
    CPU Uncore Frequency [Mhz] [ AUTO ]
    CPU Clock Skew [ 0 ps ]
    Spread Spectrum [ Disabled ]
    PCIE Frequency [Mhz] [ 107 ~ 112 ]

    EVGA VDroop Control [ Without VDroop ]
    CPU VCore [ 1.59 ~1.62 ]
    CPU VTT Voltage [ +300 ]
    CPU PLL VCore [ 2.025 ]
    IOH PLL VCore [ AUTO ]
    QPI PLL VCore [ 1.3 ]
    DIMM Voltage [ 1.65 ]
    DIMM DQ Vref [ +0mV ]
    QPI PLL VCore [ 1.300 ]
    IOH/ICH I/O Voltage [ 1.600 ]
    IOH VCore [ 1.300] -> [ 1.200 ]
    NF200 Voltage [ AUTO ]
    VTT PWM Frequency [ 610 KHZ ]
    CPU PWM Frequency [ 1333 KHZ ]
    CPU Impedance [ Less ]
    ICH VCore [ 1.10 ] -> [ 1.25 ]
    DDR Signal 0 [ +0 ]
    DDR Signal 1 [ +0 ]
    DDR Signal 2 [ +0 ]
    CPU Signal [ +0 ]
    QPI cpu [-40]
    QPI pci0 [-60]
    QPI Signal 1 [ +0 ]
    QPI Signal 2 [ +0 ]
    QPI pci1 [-31]
    QPI pci2 [-31]



    Intel SpeedStep [ Disabled ]
    Turbo Mode Function [ Disabled ] <- no matter what i do here the Turbo don't kick on
    CxE Function [ Disabled ]
    Execute Disable Bit [ Enable ]
    Virtualization Technology [ Disabled ]

    Intel HT Technology [ Enabled ]
    Active Processor Cores [ All ]

    QPI Control Settings [ Enabled ]
    QPI Link Fast Mode [ Enabled ]
    QPI Frequency Selection [ 4.800 GT/s ]
     
  2. kikicoco1334

    Joined:
    Nov 11, 2009
    Messages:
    283 (0.14/day)
    Thanks Received:
    53
    now it's not even booting that setting anymore... i have no idea why

    i am about to wip out my walther and go off on that sum'bitch
     
  3. jimmyz New Member

    Joined:
    Jun 24, 2007
    Messages:
    95 (0.03/day)
    Thanks Received:
    33
    Location:
    Indiana
    Drop CPU PLL to 1.6v And you may need more v-core to get 5200+ going, so try that. On LN2 you should be ok up to 1.8ish for short times.
    For turbo to work C1e and Speedstep need to be enabled.
     
    kikicoco1334 says thanks.
  4. kikicoco1334

    Joined:
    Nov 11, 2009
    Messages:
    283 (0.14/day)
    Thanks Received:
    53
    i see thank you!
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page