• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

I need a Bios for my RX 580 8Gb 2048SP JXZ

EDUARDO2002

New Member
Joined
Feb 10, 2024
Messages
2 (0.03/day)
Hello, I need help with an original bios for my RX 580 8GB 2048SP jxz card, currently I use a bios with 1244MHz / 1750MHz that came from the factory when I bought it, it was 1206MHz / 1500MHz, the card was very bad in the FPS rate, it did not hold it was causing a lot of absurd drop in FPS. And with the current bios the board heats up too much, reaching 89 degrees. And I already changed the thermal paste in the photo, it was with the original paste but now I've replaced it! Please, can anyone help me?

Brand: Jinsoonzer JXZ

Model: Rx 580 8GB 2048SP

Memory brand: Samsung K4G41325FE also uses two versions of the same bios, another is ELPIDA: EDW4032BABG

However, inside the board the memories are all from Samsung as you can see in the photos. Anyone who can help me I would be grateful!
 

Attachments

  • IMG_0739.jpeg
    IMG_0739.jpeg
    5 MB · Views: 44
  • IMG_0738.jpeg
    IMG_0738.jpeg
    5.1 MB · Views: 46
  • IMG_0737.jpeg
    IMG_0737.jpeg
    4.9 MB · Views: 46
  • IMG_0458.jpeg
    IMG_0458.jpeg
    2.4 MB · Views: 51
  • IMG_0457.jpeg
    IMG_0457.jpeg
    2.6 MB · Views: 46
Last edited by a moderator:
Joined
Mar 20, 2008
Messages
1,375 (0.23/day)
System Name Ryzen5900X
Processor AMD Ryzen 5900X
Motherboard Gigabyte B550 AORUS PRO AC
Cooling NZXT Kraken X62
Memory 4x G.Skill F4-3600C17D-8GTZ
Video Card(s) AMD Radeon RX 6800XT Midnight Black
Hello, I need help with an original bios for my RX 580 8GB 2048SP jxz card, currently I use a bios with 1244MHz / 1750MHz that came from the factory when I bought it, it was 1206MHz / 1500MHz, the card was very bad in the FPS rate, it did not hold it was causing a lot of absurd drop in FPS. And with the current bios the board heats up too much, reaching 89 degrees. And I already changed the thermal paste in the photo, it was with the original paste but now I've replaced it! Please, can anyone help me?

Brand: Jinsoonzer JXZ

Model: Rx 580 8GB 2048SP

Memory brand: Samsung K4G41325FE also uses two versions of the same bios, another is ELPIDA: EDW4032BABG

However, inside the board the memories are all from Samsung as you can see in the photos. Anyone who can help me I would be grateful!
JXZ is not the real brand. They sell ex-mining cards under their name.
Currently the pictures don't help us. Can you make pictures of the top and bottom side of the PCB? One large picture per side is enough.
 

EDUARDO2002

New Member
Joined
Feb 10, 2024
Messages
2 (0.03/day)
JXZ is not the real brand. They sell ex-miner cards in your name.
Currently the pictures don't help us. Can You Take Pictures Of The Top And Bottom Of The PCB? A large image on each side is sufficient.
Here are the pictures you asked for
 

Attachments

  • IMG_0749.jpeg
    IMG_0749.jpeg
    2.1 MB · Views: 30
  • IMG_0746.jpeg
    IMG_0746.jpeg
    2.2 MB · Views: 28
Last edited by a moderator:
Joined
Mar 20, 2008
Messages
1,375 (0.23/day)
System Name Ryzen5900X
Processor AMD Ryzen 5900X
Motherboard Gigabyte B550 AORUS PRO AC
Cooling NZXT Kraken X62
Memory 4x G.Skill F4-3600C17D-8GTZ
Video Card(s) AMD Radeon RX 6800XT Midnight Black
Here are the pictures you asked for
You are unlucky. K4G41325FE is almost always used on 4GB models...

See this thread where someone else has the exact same PCB:

Memory has yellow colour as well. I think you are out of luck with this card :mad:
Ask for a refund if it is possible.
 
Last edited:
Top