Phobosphantom
New Member
- Joined
- Jul 2, 2008
- Messages
- 7 (0.00/day)
- Location
- Seattle
Processor | Intel Core 2 Quad Q6600 Kentsfield (OC) to 3.2 |
---|---|
Motherboard | Nvidia 680i |
Cooling | ZALMAN CNPS 9700 |
Memory | CORSAIR XMS2 2GB (2 x 1GB) DDR2 |
Video Card(s) | two 9600GT in SLI |
Storage | WD 640 |
Display(s) | DELL ULTRASHARP 2408WFP |
Case | Antec Nine Hundred |
Audio Device(s) | Onboard mobo High Definition Audio |
Power Supply | Antec True Power Trio TP3-650 |
Software | Vista Business SP1 64bit |
Hello This is my first post I was wondering if anyone can help me out?
I am helping a friend build a new computer and we have run into a problem
the computer will not go into post or bios. We made sure at the start that the computer has spacers and we started to build. Long story short we got all the parts into the case and mobo after that we turned it on and everything came to life but nothing was being displayed on the LCD. The fans,lights and hard drives were on and running but we were getting nothing on the screen we did not hear any pops or cracks when we turned it on either. the USB dose not work on the mobo or the case either we have tried to pull the system down to the basics of one gig of ram and one video card but still nothing. We have heard no beep code or anything from the PC. The mobo is an msi diamond p6n and we have two 8800GTs in SLI we have tryed with the two cards in SLI and with each card individually. This mobo is not dual channel as far as I know. I think it could be the CPU or the mobo itself these are the only two things I can think of that can be wrong with it. Please help if you can any ideas/suggestions are very appreciated.
~Phantom
I am helping a friend build a new computer and we have run into a problem
the computer will not go into post or bios. We made sure at the start that the computer has spacers and we started to build. Long story short we got all the parts into the case and mobo after that we turned it on and everything came to life but nothing was being displayed on the LCD. The fans,lights and hard drives were on and running but we were getting nothing on the screen we did not hear any pops or cracks when we turned it on either. the USB dose not work on the mobo or the case either we have tried to pull the system down to the basics of one gig of ram and one video card but still nothing. We have heard no beep code or anything from the PC. The mobo is an msi diamond p6n and we have two 8800GTs in SLI we have tryed with the two cards in SLI and with each card individually. This mobo is not dual channel as far as I know. I think it could be the CPU or the mobo itself these are the only two things I can think of that can be wrong with it. Please help if you can any ideas/suggestions are very appreciated.
~Phantom