1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Intel Core i7-4960X De-Lidded

Discussion in 'News' started by btarunr, Jun 25, 2013.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,198 (11.43/day)
    Thanks Received:
    13,569
    Location:
    Hyderabad, India
    Coolaler.com community member "Toppc" scored an engineering sample of Intel's upcoming Core i7-4960X "Ivy Bridge-E" socket LGA2011 processor, and wasted no time in taking a peek inside its integrated heatspreader (IHS). Beneath the adhesive layer that holds the IHS to the package, which could be fairly easily cut through, "Toppc" discovered that Intel is using a strong epoxy/solder to fuse the processor's die to the IHS, and not a thermal paste, like on Core i7-3770K. Solders tend to have better conductivity than pastes, but make it extremely difficult to de-lid the processors, not to mention potentially disastrous. In the process of delidding this chip, "Toppc" appears to have knocked out a few components around the die. Unless you're good at precision soldering, something like that would be a fatal blow to your $1000 investment.

    [​IMG] [​IMG] [​IMG]

    Source: Coolaler Forums
  2. radrok

    radrok

    Joined:
    Oct 26, 2011
    Messages:
    2,980 (3.01/day)
    Thanks Received:
    798
    Location:
    Italy
    Ya seen this earlier, would have been crazy of Intel not to solder the IHS this time around on its HEDT platform.

    Let's hope Ivy-E clocks much better than SB-E now that we know it doesn't come with el cheapo TIM.

    Would like to know Intel's excuse for not providing this kind of solution ATLEAST on their K chips on the 1150 platform.
  3. m1dg3t

    m1dg3t

    Joined:
    May 22, 2010
    Messages:
    2,246 (1.49/day)
    Thanks Received:
    513
    Location:
    Canada
    Couple days late btaman :eek:

    At least now people know what to do in order to pop the top "safely" :)
  4. Jstn7477

    Jstn7477

    Joined:
    Aug 30, 2009
    Messages:
    3,776 (2.13/day)
    Thanks Received:
    1,482
    Location:
    Sarasota, Florida, USA
    Perhaps Intel has been trying to nerf LGA 115x after the first two generations when it rocked. Not many people seem to buy their poopy HEDT platform because it's now two generations outdated and the mainstream platform is still "too good" I guess. If a Haswell HEDT platform were out, I would have gladly purchased one over my 1150 setup.
    Crunching for Team TPU More than 25k PPD
  5. radrok

    radrok

    Joined:
    Oct 26, 2011
    Messages:
    2,980 (3.01/day)
    Thanks Received:
    798
    Location:
    Italy
    Man you are so right, when you compare Z87 to X79 what comes out is that Z87 seems the "enthusiast" chipset rather than X79 lol.
  6. Dj-ElectriC

    Dj-ElectriC

    Joined:
    Aug 13, 2010
    Messages:
    2,135 (1.50/day)
    Thanks Received:
    812
    You really don't need to be a genius to know intel is using a strong sold on their LGA2011 CPU's and will continue to do so
  7. lilhasselhoffer

    lilhasselhoffer

    Joined:
    Apr 2, 2011
    Messages:
    1,547 (1.29/day)
    Thanks Received:
    920
    Location:
    East Coast, USA
    ....ok....


    We know that Intel had thermal issues with SB-e. The proof of this being the 2 lasered off cores on each die.

    We know IB experimented with thermal paste, rather than solder. IB had a tendency to run hotter than SB.

    Intel isn't that kind of stupid. They chose to use the more expensive solder, because their experiment with paste failed. Of course, they could have discovered this 6 months into the IB 1155 life cycle, and put out an IB-e chip then. Apparently it took another 18 month for Intel to deem it necessary.


    Let's not go there. The nerfing of x79 was painful enough. The fact that the z87 PCH is better than the x79 in almost everything (yeah, less PCI-e lanes, but that's it) is severely depressing. You tend to get that though when you use a PCH that is based upon 4 year old technology when in came out (Patsburg was 65nm technology as far as I remember).

    Also, look back a few days. Haswell-e is slated for release in late 2014. Broadwell will already have moved into the consumer market prior to Haswell-e entering the market.


    Edit:
    Thinking about this a bit more, it dawns on me. You've got about a 10% increase in CPU performance from SB to IB. You've got another approximately 10% increase from IB to Haswell (they were focusing on the GPU after all). You've therefore got about a 21% increase from SB to Haswell. The amount of overclocking you can do can narrow what gap significantly, assuming that Haswell isn't decked out in DDR4 and the like.

    The difference between SB 1155 and Haswell 1150 is largely just a much upgraded PCH and IGP. The 2011 variants of these technologies forgo the IGP for more cores, so you're looking at minor gains in the CPU. The real difference is the PCH, which has been retained from SB-e to IB-e. Maybe Haswell will fix this, but as it stands the x79 disappointment stains anything a modest CPU performance increase can provide.
    Last edited: Jun 25, 2013
  8. micropage7

    micropage7

    Joined:
    Mar 26, 2010
    Messages:
    5,563 (3.55/day)
    Thanks Received:
    1,270
    Location:
    Jakarta, Indonesia
    thats kinda scary enough. the harder de-lid it the bigger chance you gonna kill the processor
  9. radrok

    radrok

    Joined:
    Oct 26, 2011
    Messages:
    2,980 (3.01/day)
    Thanks Received:
    798
    Location:
    Italy
    Yeah but with solder there's really no need to delid your CPU, maybe lap the IHS but even that's not needed.

    He probably did it for science and to show that Intel used fluxless solder.
    EarthDog says thanks.
  10. EarthDog

    EarthDog

    Joined:
    Dec 31, 2009
    Messages:
    3,130 (1.89/day)
    Thanks Received:
    620
    Hey now... someone put on their thinking cap!! +1!!!

    Correlation does not imply causation. The Hex's could have all been bad octo Zeon parts for all we know. There are also other thresholds, like power use to name one, that they could have been cut down. Many reasons is the point.

    I believe they HAD to use solder on these parts as its a 125W Hex core CPU versus a 77/84W quad. ;)
  11. radrok

    radrok

    Joined:
    Oct 26, 2011
    Messages:
    2,980 (3.01/day)
    Thanks Received:
    798
    Location:
    Italy
    Was quite obvious :p
  12. lilhasselhoffer

    lilhasselhoffer

    Joined:
    Apr 2, 2011
    Messages:
    1,547 (1.29/day)
    Thanks Received:
    920
    Location:
    East Coast, USA
    ...What?

    The point was that Intel had thermal issues. These thermal issues could be caused by one of two issues; either the CPU cores generate too much heat or the heat is not transferred quickly enough from the CPU.

    There are two cores lasered off, on that we can agree. This decreases thermal output by having less cores. For the sake of your argument, let's assume this was a manufacturing defect and isn't relevant.

    The heat transfer can be affected in one of two ways, interface material or medium transfer. Intel not only didn't package an air cooler with the CPU, their recommendation was for a water cooling system. This means that the heat needs to be dissipated quickly, which means there is a ton being generated. The use of a solder between CPU and its metal casing means that the increased dissipation from the water cooling would not have been enough to allow for the cheaper TIM.

    Intel is full of smart engineers. They don't choose a more expensive process just for giggles. Soldering costs money that they aren't willing to spend unless they have to. Economics always trumps the overclocking market.



    To the "other" things argument, show me something valid. If you are saying that all 6 cores are bad 8 cores, then why are the dies all setup with the same 2 cores lasered off? To the power consumption aspect, then why are the Xeon 8 cores running off the same power sources, but at lower clocks, in the same thermal envelope? I haven't yet seen a reason that is more feasible than the thermal envelope, though if you can offer one I would gladly consider it.
  13. EarthDog

    EarthDog

    Joined:
    Dec 31, 2009
    Messages:
    3,130 (1.89/day)
    Thanks Received:
    620
    They do... and correct.

    we do agree there as well.

    Correct as well. However, it has been noted that it isnt really the material but the distance between the IHS and die + thermal paste are what made things nasty. remove that extra gap, use TIM still much better temps.

    Also true.

    I didnt say all. I inferred it was possible. Its what was done in the past. Certain parts that couldnt meet Xeon octo thresholds may have been cut down to Hex and fit in those thresholds. Sure beats throwing them out, no? :laugh:

    I'm not sure what you went on about up there. We agree mostly, but it looks like you may have been hung up assuming I meant ALL Hex's are broken octo's. I am just saying its possible as it has been done in the past. That, actually, is how binning works. If a CPU cant make bin A, it goes to bin B. If it cant make bin B, it goes to bin C. Look at the AMD unlocking for an example. Is really it true? Who knows... but it is just as possible. I am sure thermal considerations played a part in it as well. I hope my clarification helps ya out there. :)
    Last edited: Jun 25, 2013
    radrok says thanks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page