-Thrilla-
New Member
- Joined
- Jun 22, 2006
- Messages
- 62 (0.01/day)
- Location
- N.Vancouver, BC, Canada
Processor | AMD Opteron 144 skt 939 |
---|---|
Motherboard | DFI SLi-DR |
Cooling | Stock Heatpipe + Coolermaster heatpipe |
Memory | OCZ Plat EL Rev.2 2x 512 dual channel |
Video Card(s) | XFX 6600gt PCI-Ex 128 with Arctic Silencer |
Storage | Western Digital 80gig IDE |
Display(s) | Samsung 19" LCD |
Case | Tisonic Breeze |
Audio Device(s) | On board |
Power Supply | Enermax Noisetaker v2 470watts |
Sorry for the pic quality.... I lost my camera...
I have 2 broken (I didn't break them lol) 17" LCDs, both have cracked screens, one wont even turn on and the other had a burnt power inverter too.
So, I took them apart, found out that they have a thick sheet of glass and some plastics under it, and of course, backlights. I removed everything else and used it as a dry erase board lol, very handy I must say.
I had some free time tonight, so I thought why not make it even better by using the backlight, and after some modding this is what I got.
A case mod cold cathode power inverter, 4 working CCFL (2 lights at a time, inverter only has 2 outlets.)
Notepad off, with a swiss knife for size reference.
Modded inverter with a plug on top, dual outlets.
1 CCFL on each side connected
Plugged in
Pin layout with a sheet of blank paper over it for tracing
Nice and even shine, only wish my camera was here lol
Dry erase pens
Dry erased, pretty clean marks
I have 2 broken (I didn't break them lol) 17" LCDs, both have cracked screens, one wont even turn on and the other had a burnt power inverter too.
So, I took them apart, found out that they have a thick sheet of glass and some plastics under it, and of course, backlights. I removed everything else and used it as a dry erase board lol, very handy I must say.
I had some free time tonight, so I thought why not make it even better by using the backlight, and after some modding this is what I got.
A case mod cold cathode power inverter, 4 working CCFL (2 lights at a time, inverter only has 2 outlets.)
Notepad off, with a swiss knife for size reference.
Modded inverter with a plug on top, dual outlets.
1 CCFL on each side connected
Plugged in
Pin layout with a sheet of blank paper over it for tracing
Nice and even shine, only wish my camera was here lol
Dry erase pens
Dry erased, pretty clean marks