Netskimmer
New Member
- Joined
- Apr 14, 2006
- Messages
- 69 (0.01/day)
Processor | Intel Northwood P4 2.8GHz@3.1GHz |
---|---|
Motherboard | ASUS P4P800 Delux |
Memory | 4x 256Mb Kingston DDR400 |
Video Card(s) | 256Mb ATI X850 Pro AGP@580/600 Silencer 5 Cooler |
Display(s) | Ergo 1600 21" CRT & Gateway EV700 17" CRT dual display |
Audio Device(s) | SB Audigy 2 ZS |
Power Supply | Antec true 550W |
If I move it slowly enough it performs properly but any rapid movement and it acts pretty much the same way a roller mouse would act if the rollers and/or ball needed to be cleaned, the pointer hesitates or goes ballistic. I’ve checked the optics and the surface on which it is used to make sure they are clean but it has no effect. Has anyone else experienced this or know how to fix it?