HumanXJT
New Member
- Joined
- Jan 22, 2009
- Messages
- 17 (0.00/day)
Processor | Intel Core 2 Quad Q6600 (G0) |
---|---|
Motherboard | Gigabyte GA-P35-DS4 |
Cooling | Thermalright Ultra-120 |
Memory | 4x OCZ XTC System Elite Edition 1GB DDR2-800 |
Video Card(s) | Sparkle 8800GTX |
Storage | Wester Digital SATA 500GB |
Display(s) | Viewsonic VX2235wm 20" |
Case | Thermaltake Soprano |
Audio Device(s) | n/a |
Power Supply | Cooler Master 750W |
Software | Windows Vista Ultimate 64-bit |
I'm new to overclocking and so far i am able to overclock my Q6600 to 3.2ghz (400mhz x 8) with a vcore of 1.325.
When i try overclocking anything above that the system won't POST/BOOT even when i increase the vcore up to 1.5v.
I think i might need to increase the other voltages, unfortunately since i'm still new to overclocking i have no clue what i should increase.
Also could the problem be due to my 4x1GB ram, as i've seen people saying overclocking would be easier with less ram.
<<--- System Specs
Thank you for your help.
When i try overclocking anything above that the system won't POST/BOOT even when i increase the vcore up to 1.5v.
I think i might need to increase the other voltages, unfortunately since i'm still new to overclocking i have no clue what i should increase.
Also could the problem be due to my 4x1GB ram, as i've seen people saying overclocking would be easier with less ram.
<<--- System Specs
Thank you for your help.
Last edited: