- Joined
- Mar 10, 2011
- Messages
- 254 (0.05/day)
- Location
- Minnesota
Last week i got an Alienware Aurora case from 2003 i think? Well anywho, i had roughly 60 hours and about 50 bucks to my name to work on the case and this is what i came up with.
Changes: I first cut out the old hard drive bay. This was in the way for the liquid cooling loop. I decided to do a 2x 120mm radiator with 4 120mm fans (push|pull). To let that breath, i cut the front out. It may be hard to see in the photos. Then clearly i did a simple Purple / White paint job.
Dont forget to check the spoilers for more photos
Before
Process: Not many photos of the build mostly because I finished the most of the work at night.
After:
Changes: I first cut out the old hard drive bay. This was in the way for the liquid cooling loop. I decided to do a 2x 120mm radiator with 4 120mm fans (push|pull). To let that breath, i cut the front out. It may be hard to see in the photos. Then clearly i did a simple Purple / White paint job.
Dont forget to check the spoilers for more photos
Before
Process: Not many photos of the build mostly because I finished the most of the work at night.
First coat of white primer on the exterior plastic
First coat of black primer on the case
Adding the parts.
More paint
First coat of black primer on the case
Adding the parts.
More paint
After:
The interior
More
DatI/O
More
DatI/O