Hi,
So I just bought this SSD about a week ago and have been using it for about 3 days so far. It seems really fast and all, but I have had a minor problem with it. I would be browsing the net normally then suddenly my mouse input would start lagging slowly then suddenly freeze. The computer would completely freeze and refuse to take any inputs from the mouse or keyboard.
I have checked for new FW updates via the Samsung SSD Magician Tool, but it seems I'm already running the latest firmware.
When I first got my SSD I installed a fresh copy of Widows 7 on it then followed the following guide to optimize Windows 7 accordingly: http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds
Now the guide mentions to use the native AMD SATA controllers instead of any third party ones, which I did in the first place, however I just went into the BIOS and completely disabled the other 3rd part controller a few mins ago since the computer just froze for the 2nd time in 3 days.
Any ideas on what I should try doing or what might be causing this? Should I try updating my BIOS or something?
This is my setup atm:
Motherboard: GA-890GPA-UD3H (rev. 2.0) @ BIOS Version FF
RAM: G. Skill Ripjaws 12GB DDR3 1600MHz PC3-12800 CL9
CPU: AMD Phenom II X6 1055T @ Stock 2.8GHz
GPU: EVGA GTX 460 SuperClocked 768MB
HDD: 1x Seagate 320GB 7200RPM, 1x Samsung F3 Spinpoint 1TB 7200RPM, 1x Samsung F4 Spinpoint 2TB 5400RPM
SSD: Samsung 830 256GB
PSU: Antec EarthWatts 750 Watts
Here is my CPU-Z Validation if needed: http://valid.canardpc.com/show_oc.php?id=2492852
Please let me know if anymore information is required. Thanks in advance.
So I just bought this SSD about a week ago and have been using it for about 3 days so far. It seems really fast and all, but I have had a minor problem with it. I would be browsing the net normally then suddenly my mouse input would start lagging slowly then suddenly freeze. The computer would completely freeze and refuse to take any inputs from the mouse or keyboard.
I have checked for new FW updates via the Samsung SSD Magician Tool, but it seems I'm already running the latest firmware.
When I first got my SSD I installed a fresh copy of Widows 7 on it then followed the following guide to optimize Windows 7 accordingly: http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds
Now the guide mentions to use the native AMD SATA controllers instead of any third party ones, which I did in the first place, however I just went into the BIOS and completely disabled the other 3rd part controller a few mins ago since the computer just froze for the 2nd time in 3 days.
Any ideas on what I should try doing or what might be causing this? Should I try updating my BIOS or something?
This is my setup atm:
Motherboard: GA-890GPA-UD3H (rev. 2.0) @ BIOS Version FF
RAM: G. Skill Ripjaws 12GB DDR3 1600MHz PC3-12800 CL9
CPU: AMD Phenom II X6 1055T @ Stock 2.8GHz
GPU: EVGA GTX 460 SuperClocked 768MB
HDD: 1x Seagate 320GB 7200RPM, 1x Samsung F3 Spinpoint 1TB 7200RPM, 1x Samsung F4 Spinpoint 2TB 5400RPM
SSD: Samsung 830 256GB
PSU: Antec EarthWatts 750 Watts
Here is my CPU-Z Validation if needed: http://valid.canardpc.com/show_oc.php?id=2492852
Please let me know if anymore information is required. Thanks in advance.