Project Cosmos 1000

n0tiert · May 3, 2009

kyle2020 said:
Wow, that looks awesome!

What tubing have you used? some nice tight curves there, nice to see no kinking

Tube = Tygon 360 8/11 mm Ø
Tygon tubes are very soft and smooth from the material
i used metall springs to get those tight curves

Scrizz · May 3, 2009

very nice

n0tiert · May 3, 2009

the backside where i placed the tempsensor also u can see the benefit of the rail mod

after all is done i need to polish the case, fingerprints all over

kyle2020 · May 3, 2009

I assume you will be running this with no right side panel?

n0tiert · May 3, 2009

kyle2020 said:
I assume you will be running this with no right side panel?

shure i will place panel back on why shouldnt i ? fits perfect

i cut the rail a bit see 1st post before there was no room between the mainboard backplate and the rail.
pulled the tube out a bit to connect the sensor cable is resists covered between the rail and side panel

kyle2020 · May 3, 2009

Oh so you just tuck that tubing back in the case?

n0tiert · May 3, 2009

kyle2020 said:
Oh so you just tuck that tubing back in the case?

it will be placed like this:

side panel fit´s perfect

kyle2020 · May 3, 2009

Very nice.

n0tiert · May 3, 2009

kyle2020 said:
Very nice.

since i changed the backplate bend & drilled a hole in the area above the rail i can also make some smooth wirering up there for the upper usb connector of maiboard, fan power, tempsensor .....

n0tiert · May 3, 2009

just found those on coolermaster.nl from the HAF Case might be kewl coz they are all black

and the black side panels from the cosmos "S" might also looks sharp

to bad they don´t sell the rear mesh slot bracket like the HAF has....

phanbuey · May 3, 2009

nexus makes a mesh rear bracket just like that

n0tiert · May 4, 2009

phanbuey said:
nexus makes a mesh rear bracket just like that

yepp i found them, thx !

then the mesh on the case looks all the same... dunno why they didn´t done that for the cosmos modell in stock

WarEagleAU · May 4, 2009

Looking good man. I should have got me some coil to go with the tubing I got.

n0tiert · May 4, 2009

WarEagleAU said:
Looking good man. I should have got me some coil to go with the tubing I got.

The coil´s do a great job ! and they arent that expensive... i think it´s better than that plastik stuff u can buy

n0tiert · May 4, 2009

Finally i can close the loop today,

the exaust radiator and the pumpholder arrived today :cool:

kyle2020 · May 4, 2009

Remember to take a butt load of pictures

n0tiert · May 4, 2009

kyle2020 said:
Remember to take a butt load of pictures

I´d say w00t w00t in the butt

Hayder_Master · May 4, 2009

wow , that's really great work , very nice look

Scrizz · May 4, 2009

sweet can't w8 to see even more pics.
You've given me some great ideas on what to do with my Comos S
especially in the water cooling area.

n0tiert · May 4, 2009

Scrizz said:
sweet can't w8 to see even more pics.
You've given me some great ideas on what to do with my Comos S
especially in the water cooling area.

haha all ideas are property of the owner

if it has almost the same backplate check the upper bend mod for better cablemanagement
it´s just a few millimeter but have a great effect dunno why coolermaster done that in first place

and to move it into the 5 1/4 slot also make shure u drill that hole

phanbuey · May 4, 2009

MUST SEE MORE PICS *twitches* This is a beautiful build.

n0tiert · May 4, 2009

it looks like i have a little space problem with the exhaust Rad, due space and the upper rad connectors, also the fan would cover the first quart of the mainboard if i mount it in the case, lets see what i can do..... because i don´t wanna mount the rad outside i took the xtreme edition of magicool 120 there was also a slim version, but i thought if i go on the slim i don´t need a second rad..... only preffers the phat chics :rockout:

Scrizz · May 4, 2009

lol phat chics

n0tiert · May 4, 2009

here is the prob, as u can see the magicool Xtreme 120 Rad takes a lot of space in the exaust area

the exhaust mesh from the case is a bit neded to the outside, so i had to cut it out to place athe fan here....

phanbuey · May 4, 2009

man, that sucks... i would not even try to fit the fattie... the only way that thing will fit is if you re-route your entire tubing system... is there anywhere else in the case you can put it? Maybe instead of an exhaust rad, the triple can be the exhaust and that rad can be the chiller... i.e. the rad that cools the air after the pumo and before the cpu? im thinking hard drive intake.

System Name	Shaman of Sexy
Processor	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory	4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s)	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage	RAID 0 Seagate
Display(s)	Samsung 226BW 22"
Case	CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s)	onboard
Power Supply	Coba Nitrox 750W
Software	Windows 7 Ultimate
Benchmark Scores	http://service.futuremark.com/compare?3dmv=1056967

System Name	:)
Processor	Intel 13700k
Motherboard	Gigabyte z790 UD AC
Cooling	Noctua NH-D15
Memory	64GB GSKILL DDR5
Video Card(s)	Gigabyte RTX 4090 Gaming OC
Storage	960GB Optane 905P U.2 SSD + 4TB PCIe4 U.2 SSD
Display(s)	Alienware AW3423DW 175Hz QD-OLED + Nixeus 27" IPS 1440p 144Hz
Case	Fractal Design Torrent
Audio Device(s)	MOTU M4 - JBL 305P MKII w/2x JL Audio 10 Sealed --- X-Fi Titanium HD - Presonus Eris E5 - JBL 4412
Power Supply	Silverstone 1000W
Mouse	Roccat Kain 122 AIMO
Keyboard	KBD67 Lite / Mammoth75
VR HMD	Reverb G2 V2
Software	Win 11 Pro

System Name	Shaman of Sexy
Processor	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory	4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s)	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage	RAID 0 Seagate
Display(s)	Samsung 226BW 22"
Case	CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s)	onboard
Power Supply	Coba Nitrox 750W
Software	Windows 7 Ultimate
Benchmark Scores	http://service.futuremark.com/compare?3dmv=1056967

System Name	Shaman of Sexy
Processor	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory	4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s)	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage	RAID 0 Seagate
Display(s)	Samsung 226BW 22"
Case	CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s)	onboard
Power Supply	Coba Nitrox 750W
Software	Windows 7 Ultimate
Benchmark Scores	http://service.futuremark.com/compare?3dmv=1056967

System Name	Shaman of Sexy
Processor	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory	4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s)	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage	RAID 0 Seagate
Display(s)	Samsung 226BW 22"
Case	CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s)	onboard
Power Supply	Coba Nitrox 750W
Software	Windows 7 Ultimate
Benchmark Scores	http://service.futuremark.com/compare?3dmv=1056967

Project Cosmos 1000

n0tiert

Scrizz

n0tiert

kyle2020

Guest

n0tiert

kyle2020

Guest

n0tiert

kyle2020

Guest

n0tiert

n0tiert

phanbuey

n0tiert

WarEagleAU

Bird of Prey

n0tiert

n0tiert

kyle2020

Guest

n0tiert

Hayder_Master

Scrizz

n0tiert

phanbuey

n0tiert

Scrizz

n0tiert

phanbuey

Processor	13700KF Undervolted @ 5.6/ 5.5, 4.8Ghz Ring 200W PL1
Motherboard	MSI 690-I PRO
Cooling	Thermalright Peerless Assassin 120 w/ Arctic P12 Fans
Memory	48 GB DDR5 7600 MHZ CL36
Video Card(s)	RTX 4090 FE
Storage	2x 2TB WDC SN850, 1TB Samsung 960 prr
Display(s)	Alienware 32" 4k 240hz OLED
Case	SLIGER S620
Audio Device(s)	Yes
Power Supply	Corsair SF750
Mouse	Xlite V2
Keyboard	RoyalAxe
Software	Windows 11
Benchmark Scores	They're pretty good, nothing crazy.

System Name	Pandemic 2020
Processor	AMD Ryzen 5 "Gen 2" 2600X
Motherboard	AsRock X470 Killer Promontory
Cooling	CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory	32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s)	ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage	WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s)	ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case	Fractal Define R6 C
Audio Device(s)	Realtek 5.1 Onboard
Power Supply	Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse	Razer Death Adder
Keyboard	Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software	Windows 10 Pro x64

System Name	MASTER
Processor	Core i7 3930k run at 4.4ghz
Motherboard	Asus Rampage IV extreme
Cooling	Corsair H100i
Memory	4x4G kingston hyperx beast 2400mhz
Video Card(s)	2X EVGA GTX680
Storage	2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s)	Samsung 27' 1080P LED 3D monitior 2ms
Case	CoolerMaster Chosmos II
Audio Device(s)	Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply	Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software	Win7 64bit Ultimate
Benchmark Scores	3d mark 2011: testing