KBD
New Member
- Joined
- Feb 23, 2007
- Messages
- 2,477 (0.39/day)
- Location
- The Rotten Big Apple
| Processor | Intel e8600 @ 4.9 Ghz |
|---|---|
| Motherboard | DFI Lanparty DK X48-T2RSB Plus |
| Cooling | Water |
| Memory | 2GB (2 x 1GB) of Buffalo Firestix DDR2-1066 |
| Video Card(s) | MSI Radeon HD 4870 1GB OC (820/950) & tweaking |
| Storage | 2x 74GB Velociraptors in RAID 0; 320 GB Barracuda 7200.10 |
| Display(s) | 22" Mitsubishi Diamond Pro 2070SB |
| Case | Silverstone TJ09-BW |
| Audio Device(s) | Creative X-Fi Titanium Fatal1ty Profesional |
| Power Supply | Ultra X3 800W |
| Software | Windows XP Pro w/ SP3 |
Ok, i just uninstalled the old Win XP 158.22 driver and installed the new 162.18 and after i launch Rivatuner i get this message:
Warning! Rivatuner has not been tested with the currently installed driver.
It is strongly recomended to upgrade Rivatuner to a new version, otherwise it will not work properly because it is not curently supported.
What's going on here? According to a Rivatuner description page at Guru3d it does support 160.xx and 162.xx driver families. Is there a newer version out cause i havem't seen it?Basically i use this utility to manage the vid cards fan speed, i haven't tried to oc yet, can i continue doing at least that or not?
Warning! Rivatuner has not been tested with the currently installed driver.
It is strongly recomended to upgrade Rivatuner to a new version, otherwise it will not work properly because it is not curently supported.
What's going on here? According to a Rivatuner description page at Guru3d it does support 160.xx and 162.xx driver families. Is there a newer version out cause i havem't seen it?Basically i use this utility to manage the vid cards fan speed, i haven't tried to oc yet, can i continue doing at least that or not?
when I got that message I was worried but after I restarted the computer the fan speed was set to 79% so it does work fine 
