- Joined
- Sep 25, 2007
- Messages
- 5,965 (0.98/day)
- Location
- New York
Processor | AMD Ryzen 9 5950x, Ryzen 9 5980HX |
---|---|
Motherboard | MSI X570 Tomahawk |
Cooling | Be Quiet Dark Rock Pro 4(With Noctua Fans) |
Memory | 32Gb Crucial 3600 Ballistix |
Video Card(s) | Gigabyte RTX 3080, Asus 6800M |
Storage | Adata SX8200 1TB NVME/WD Black 1TB NVME |
Display(s) | Dell 27 Inch 165Hz |
Case | Phanteks P500A |
Audio Device(s) | IFI Zen Dac/JDS Labs Atom+/SMSL Amp+Rivers Audio |
Power Supply | Corsair RM850x |
Mouse | Logitech G502 SE Hero |
Keyboard | Corsair K70 RGB Mk.2 |
VR HMD | Samsung Odyssey Plus |
Software | Windows 10 |
no I did not touch the power limit
I have only overclocked on stock volts to 1400 so far
The fact that they both have the same BIOS revision irritates me, how are we suppose to easily know what BIOS a card is using if they all have the same revision number while not being the same.
You should physically look at what's marked on the VRAM chips. They might actually be rated at 2000MHz and if it's the case they're good for 2250MHz.
I checked the memory in polaris bios editor and its K4G41325FE but I think its the HC28(7000Mhz) and not the HC25(8000Mhz) since it only does 2090Mhz, if it were HC25 it would do 2250.I tried 2100+ and get errors after a hour.(not on the screen though) I have not removed the heatsink to check though.
Just make sure you don't run furmark on the RS cards especially when running the power limit high. Flashing the bios of an RS to GTR is also not safe since the PCB is not the same I think.Immediate results. Power limit now goes to 50% for me!! hello more OC!!
Last edited: