1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Scythe Announces Kaze Master Flat Fan Controller

Discussion in 'News' started by btarunr, Feb 8, 2012.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,713 (11.15/day)
    Thanks Received:
    13,670
    Location:
    Hyderabad, India
    Japanese cooling expert Scythe expands the product portfolio of fan controllers by a brand new model. Scythe chose a different path when designing the new Kaze Master Flat fan controller. Previously announced fan controller models utilized rotating knobs (potentiometer) as control system. Kaze Master Flat comes with a front panel, which is covering the buttons used for operating the fan controller.

    Kaze Master Flat combines both a tidy and clean front panel design with Scythe's usual variety of functions. Hence allows it to match almost every on market PC Chassis. With only one finger tip users are able to open the front panel, which grants access to six buttons used as control system. Four of the buttons are being used to adjust the fan speed of the individual fan channel. The other two located on the both sided of Kaze Master Flat allow shutting down of the alarm signal and activating or deactivating of the built-in VF-Display (Vacuum Fluorescent Display).

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]

    Kaze Master Flat fan controller fits common 5,25 inch pc case bays and allows users to control up to 4 fans individually as well as monitoring of 4 temperature sensors. Actual fan speed and temperature values of the 4 channels are displayed on the VF-Display (Vacuum Fluorescent Display) located in the front. Temperature values can be displayed both in degrees Celsius or degrees Fahrenheit. Supported temperature range is specified between 0 and 100°C respectively 32 and 199,9°F.

    Voltage regulation range for the four fan channels has been kept wide, supporting a stable voltage from 3,7 to 12 volts. Hence allows more room for fan speed and airflow optimizations inside the PC Chassis. Further new technological improvements have been applied to the safety features. Kaze Master Flat fan controller gives users the option to set an individual alarm temperature in 5°C steps by using the DIP-Switch located on the rear side of the fan controller. It is possible to set the alarm temperature in 5°C or 41°F steps from 55 to 90°C respectively from 131 to 194°F. Reaching of the set temperature would result in a visual and audio alarm by the Kaze Master Flat fan controller. The audio alarm can be shut down by pressing the mute button or permanently deactivated using the appropriate jumper.

    All the relevant information in regards to the built-in safety mechanisms, can be found in the supplied multilingual user manual.

    New Scythe Kaze Master Flat fan controller (Model No. KM06-BK) is available as of today for 28,00 EUR (excl. VAT/TAX).

    For more information, visit the product page.
     
    rpsgc and Norton say thanks.
  2. Norton

    Norton WCG-TPU Team Captain

    Joined:
    Dec 21, 2011
    Messages:
    8,814 (8.47/day)
    Thanks Received:
    20,154
    Any idea when these will be available the the US?
     
    Crunching for Team TPU
  3. rpsgc

    rpsgc

    Joined:
    Feb 9, 2007
    Messages:
    696 (0.25/day)
    Thanks Received:
    133
    Location:
    Portugal
    It looks yummy.
     
  4. fochkoph

    fochkoph

    Joined:
    Nov 23, 2008
    Messages:
    151 (0.07/day)
    Thanks Received:
    13
    Location:
    Fremont, CA
    This is relevant to my interests and a worthy replacement for my aging Kaze Master Pro.
     
  5. Norton

    Norton WCG-TPU Team Captain

    Joined:
    Dec 21, 2011
    Messages:
    8,814 (8.47/day)
    Thanks Received:
    20,154
    +1 and for my Kaze as well :toast:

    C'mon hurry up and sell in US
     
    Crunching for Team TPU
  6. m1dg3t

    m1dg3t

    Joined:
    May 22, 2010
    Messages:
    2,247 (1.39/day)
    Thanks Received:
    513
    Location:
    Canada
    Never liked digital controller's, they are unreliable from my experience's. They also usually lack support for high draw fan's, never mind the voltage range the amp's is what matter's. IMHO of course :eek: Bright light's and shinny surface's does = sale's though

    It's possible to make a controller with knob's that don't stick out, unless they have to. Sunbeam rheobus is still one of the best controller's IMO

    Edit: I don't spreken zie deutsch so product page is useless to me, any of our German member's care to translate?
     
    Last edited: Feb 8, 2012
  7. Norton

    Norton WCG-TPU Team Captain

    Joined:
    Dec 21, 2011
    Messages:
    8,814 (8.47/day)
    Thanks Received:
    20,154
    I know what you mean about the bright lights and knobs :p

    This one has a cover, no stick out buttons, and the ability to turn the lights off an awesome upgrade for my Silverstone Fortress :toast:
     
    Crunching for Team TPU
  8. EarthDog

    EarthDog

    Joined:
    Dec 31, 2009
    Messages:
    3,316 (1.88/day)
    Thanks Received:
    683
    Ive had good luck with digi's... :)

    Also, google translate FTW!
     
  9. m1dg3t

    m1dg3t

    Joined:
    May 22, 2010
    Messages:
    2,247 (1.39/day)
    Thanks Received:
    513
    Location:
    Canada
    BAH! Google pfft :p

    These controller's are for some people, just not for me :eek:
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page